Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
38030-94C-6P15A | 3 - Design Control Reference | 2 - Production Item | SPS TECHNOLOGIES, LLC | 56878 | ![]() |
FF-S-86 | 4 - Non-Definitive Specification or Standard Document | 1 - Incomplete Part Number | FEDERAL SPECIFICATIONS | 81348 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Non-Definitive U.S. Government Specification or Standard Reference. Any Government specification or standard reference other than those indicated in code 2 as definitive references. This code shall be used for non-definitive Government specifications and standard references and non-definitive part numbers, type designators, and style numbers included therein which are coded with RNVC 1.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
53 | 5305 | 012782587 | A003B0 | 16282 | X | K | A | N | U | 3 May 1988 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive - Reference Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZG01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZR01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
YA01 | 1 Jul 2001 |
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 2 | 4 | 9Z | D | 38030-94C-6P15A | 56878 | ![]() | |||||
4 | 1 | 4 | 9Z | D | FF-S-86 | 81348 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
DLIS-K, Battle Creek, MI 49037-3084
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
Non-Definitive U.S. Government Specification or Standard Reference. Any Government specification or standard reference other than those indicated in code 2 as definitive references. This code shall be used for non-definitive Government specifications and standard references and non-definitive part numbers, type designators, and style numbers included therein which are coded with RNVC 1.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
5 | 97 | 0 | 3 May 1988 |
An item authorized for procurement that has not yet been subject to item standardization.
DLIS-LFF, Battle Creek, MI 49037-3084
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZG |
Germany
No Variation. NMFC and UFCC Match.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
ZZZX | Departure From Cited Designator | AS MODIFIED BY TIN SURF. TREAT. 0.0002 IN. THK |
AGAV | End Item Identification | TORNADO ACFT |
AASB | Fastener Length | 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
CQFM | Hardness Rating | 36.0 ROCKWELL C MINIMUM OVERALL AND 43.0 ROCKWELL C MAXIMUM OVERALL |
AASU | Head Height | 0.051 INCHES MINIMUM AND 0.059 INCHES MAXIMUM |
AASL | Head Diameter | 0.201 INCHES MINIMUM AND 0.213 INCHES MAXIMUM |
AASK | Head Style | BUTTON |
MATT | Material | STEEL COMP 302 OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 305 OVERALL OR STEEL COMP 316 OVERALL OR STEEL COMP 384 OVERALL |
CQBC | Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH |
AHYM | Nominal Thread Diameter | 0.112 INCHES |
ZZZT | Nondefinitive Spec/Std Data | 8 TYPE |
ABQZ | Internal Drive Style | HEXAGON |
MDCL | Material Document And Classification | ASTM A493 UNS S30200,S30400,S30500,S31600,S38400 ASSN STD ALL MATERIAL RESPONSES OVERALL |
CMLP | Thread Quantity Per Inch | 40 |
THSD | Thread Series Designator | UNRC |
ASDB | Width Across Flats | 0.062 INCHES NOMINAL |
ZZZK | Specification/Standard Data | 81348-FF-S-86 GOVERNMENT SPECIFICATION |
SUPP | Supplementary Features | ELECT. APPL |
STDC | Surface Treatment Document And Classification | AMS 2485 ASSN STD SINGLE TREATMENT RESPONSE OVERALL OR MIL-T-10727,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
SFTT | Surface Treatment | TIN OVERALL |
AAJF | Thread Direction | RIGHT-HAND |
AAJD | Thread Class | 3A |
AASA | Thread Length | 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |