Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
585R981H09 | 3 - Design Control Reference | 2 - Production Item | NORTHROP GRUMMAN SYSTEMS CORPORATION | 97942 | ![]() |
585R981H09 | 5 - Replaced / Discontinued | 2 - Production Item | FASTENER TECHNOLOGY CORP. | 58794 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
53 | 5305 | 012829200 | A003B0 | 33044 | X | 4 | 6 | A | N | A | 25 Jul 1988 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Partial Descriptive Item Identification (Type 1 Concept)
An approved item name and FIIG may exist, but it has previously been established and documented that industry refuses to provide the technical data sufficient for preparation on a full descriptive method item identification based on policy, restricted or proprietary data rights, nonexistence of technical data, etc.
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Item does not contain Precious Metal.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
FXGI | FXKZ | 1 | C | Z | SX | 1 Jun 2005 |
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
Oklahoma City Air Logistics Center, Tinker AFB, OK 73145-3043
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 2 | 5 | KZ | 585R981H09 | 97942 | ![]() | ||||||
5 | 2 | 5 | ZZ | 585R981H09 | 58794 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
Defense Supply Center Philadelphia, Philadelphia, PA 19101
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
USA
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
5 | 97 | 0 | 25 Jul 1988 |
An item authorized for procurement that has not yet been subject to item standardization.
DLIS-LFF, Battle Creek, MI 49037-3084
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
KH | 573 | Z | 9 | A | B | Z | W | 093486 | Z | 48950 | BOLTS-NUTS-OR-SCREWS--NOI--SUB-3- |
Defense Industrial Supply Center, Philadelphia, PA 19111
Bolts or Nuts (Iron or Steel), (less than 35 feet)
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
No special handling required.
Variable Rating
No Variation. NMFC and UFCC Match.
Defense Logistics Agency, Enterprise Business Systems
DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED. Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Unclassified
No QUP
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM. Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
100
Department of the Air Force
Defense Logistics Agency
Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
---|---|---|---|---|---|---|---|---|---|---|---|
P | P | 10 | 1 | AAA | 0.1 lbs | 0.005 cu ft |
Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
---|---|---|---|---|---|---|---|---|---|---|---|
00 | 00 | 00 | 0 | D3 | D3 | 00 | E | Q | O |
Primary Inventory Control Activity (PICA)
Primary Inventory Control Activity (PICA)
Physical protection
Any suitable process that is not injurious to the item.
No requirement
No requirement
No requirement
Not Applicable
PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.
PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.
No special marking
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AASB | Fastener Length | 1.653 INCHES MINIMUM AND 1.701 INCHES MAXIMUM |
CQFM | Hardness Rating | 35.0 ROCKWELL C MINIMUM PRIMARY WASHER AND 43.0 ROCKWELL C MAXIMUM PRIMARY WASHER |
AASU | Head Height | 0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
AASK | Head Style | HEXAGON |
MDCL | Material Document And Classification | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE SECONDARY WASHER |
MDCL | Material Document And Classification | QQ-W-423 COND B FED SPEC SINGLE MATERIAL RESPONSE SPRING |
MATT | Material | STEEL COMP 301 PRIMARY WASHER OR STEEL COMP 302 PRIMARY WASHER OR STEEL COMP 302B PRIMARY WASHER OR STEEL COMP 303 PRIMARY WASHER OR STEEL COMP 303SE PRIMARY WASHER OR STEEL COMP 304 PRIMARY WASHER OR STEEL COMP 304L PRIMARY WASHER OR STEEL COMP 305 PRIMARY WASHER OR STEEL COMP 308 PRIMARY WASHER OR STEEL COMP 309 PRIMARY WASHER OR STEEL COMP 309S PRIMARY WASHER OR STEEL COMP 310 PRIMARY WASHER OR STEEL COMP 310S PRIMARY WASHER OR STEEL COMP 314 PRIMARY WASHER OR STEEL COMP 316 PRIMARY WASHER OR STEEL COMP 316L PRIMARY WASHER OR STEEL COMP 317 PRIMARY WASHER OR STEEL COMP 321 PRIMARY WASHER OR STEEL COMP 347 PRIMARY WASHER OR STEEL COMP 348 PRIMARY WASHER OR STEEL COMP 384 PRIMARY WASHER OR STEEL COMP 385 PRIMARY WASHER |
MATT | Material | STEEL COMP 301 SECONDARY WASHER OR STEEL COMP 302 SECONDARY WASHER |
MATT | Material | STEEL COMP 302 STAND-OFF OR STEEL COMP 304 STAND-OFF OR STEEL COMP 305 STAND-OFF OR STEEL COMP 309 STAND-OFF OR STEEL COMP 310 STAND-OFF OR STEEL COMP 316 STAND-OFF OR STEEL COMP 316L STAND-OFF OR STEEL COMP 321 STAND-OFF OR STEEL COMP 347 STAND-OFF OR STEEL COMP 317 STAND-OFF OR STEEL COMP 304L STAND-OFF |
MATT | Material | STEEL COMP 302 SPRING |
MATT | Material | STEEL COMP XM-13 FASTENER |
CQBC | Minimum Tensile Strength | 175000 POUNDS PER SQUARE INCH |
AHYM | Nominal Thread Diameter | 0.250 INCHES |
MDCL | Material Document And Classification | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE FASTENER |
FEAT | Special Features | KNURL ON SLEEVE 20 WIDE MIN; 0.375-24UNF-2B |
THSD | Thread Series Designator | UNF |
AATB | Width Between Flats | 0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
SFTT | Surface Treatment | PASSIVATE OVERALL |
AAJF | Thread Direction | RIGHT-HAND |
AAJD | Thread Class | 2A |
AASA | Thread Length | 0.585 INCHES MINIMUM AND 0.615 INCHES MAXIMUM |
CMLP | Thread Quantity Per Inch | 28 |