Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
MS27576-5-47 | 2 - Definitive Specification or Standard Document | 2 - Production Item | MILITARY STANDARDS | 96906 | |
106467-5-47 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | SPS TECHNOLOGIES, LLC | 80539 | |
AS194-5-47 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | AVIBANK MFG., INC. | 84256 | |
CA4510-5-47 | 5 - Replaced / Discontinued | 9 - No Longer Used | ALCOA GLOBAL FASTENERS, INC. | 29372 |
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
53 | 5306 | 000034112 | A003B0 | 27851 | X | 1 | A | N | U | 14 May 1972 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZC01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZH01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZK01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
YB01 | 1 Feb 1994 | |||||||||||||||||||||||||||||
ZN01 | 1 Feb 1995 | |||||||||||||||||||||||||||||
ZU01 | 1 Jul 1995 | |||||||||||||||||||||||||||||
YJ01 | 1 May 1996 |
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 2 | 2 | 4 | KZ | D | MS27576-5-47 | 96906 | |||||
4 | 5 | 1 | 5 | KZ | D | 106467-5-47 | 80539 | |||||
4 | 5 | 1 | 5 | KZ | D | AS194-5-47 | 84256 | |||||
4 | 5 | 9 | 5 | KZ | B | CA4510-5-47 | 29372 |
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
Defense Supply Center Philadelphia, Philadelphia, PA 19101
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
3 | KZ | 1 | 1 | KZ | 0 | 23 Jan 1989 | 5306011648515 | 12 Jan 1989 |
An item which, as a result of a formal item reduction study, is accepted as not authorized for procurement.
Defense Supply Center Philadelphia, Philadelphia, PA 19101
Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. See volume 4, chapter 4.9.Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.
An item authorized for procurement as a result of a formal item reduction study and accepted as a replacement for one or more items not authorized for procurement. In addition, in generic relationships, a code 1 item is related to a code 2 item.
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
KZ | 573 | Z | 9 | A | B | Z | W | 093486 | Z | 48950 | BOLTS-NUTS-OR-SCREWS--NOI--SUB-3- |
Defense Supply Center Philadelphia, Philadelphia, PA 19101
Bolts or Nuts (Iron or Steel), (less than 35 feet)
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
No special handling required.
Variable Rating
No Variation. NMFC and UFCC Match.
Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
---|---|---|---|---|---|---|---|---|---|---|---|
P | ZZ | Z | 0.1 lbs | 0.001 cu ft |
Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
---|---|---|---|---|---|---|---|---|---|---|---|
ZZ | ZZ | ZZ | Z | ZZ | ZZ |
Primary Inventory Control Activity (PICA)
See J.4.1.b
Special Requirements - See specific instructions or drawings provided.
Special requirement – See specific instructions or drawings provided
Special requirements – see specific instructions or drawings provided
Special requirements. See specific instructions or drawings provided.
Special requirements-See specific instructions or drawings provided
Special requirement – See specific instructions or drawings provided.
Special requirement – See specific instructions or drawings provided.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
CRZS | Distance From Head Largest Bearing Surface To Shank Hole Center | 3.300 INCHES MINIMUM FIRST HOLE AND 3.330 INCHES MAXIMUM FIRST HOLE |
AASB | Fastener Length | 3.415 INCHES MINIMUM AND 3.435 INCHES MAXIMUM |
AAUR | Grip Diameter | 0.3108 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM |
ANEE | Grip Length | 2.938 INCHES MINIMUM AND 2.954 INCHES MAXIMUM |
CQFM | Hardness Rating | 36.0 ROCKWELL C MINIMUM OVERALL AND 41.0 ROCKWELL C MAXIMUM OVERALL |
AASU | Head Height | 0.157 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
AASK | Head Style | DISHED HEXAGON |
MATT | Material | STEEL OVERALL |
AHYM | Nominal Thread Diameter | 0.312 INCHES |
MDCL | Material Document And Classification | MIL-B-83050 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
AAWB | Shank Unthreaded Hole Diameter | 0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE |
FEAT | Special Features | W/RETAINING ELEMENT ON SHANK |
AATB | Width Between Flats | 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM |
CSYM | Surface Finish | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
CSYM | Surface Finish | 63.0 MICROINCHES GRIP |
STDC | Surface Treatment Document And Classification | QQ-P-416 TY 2 CL @3 FED SPEC ALL TREATMENT RESPONSES OVERALL |
SFTT | Surface Treatment | CADMIUM OVERALL AND CHROMATE OVERALL |
AAJF | Thread Direction | RIGHT-HAND |
AAJD | Thread Class | 3A |
AASA | Thread Length | 0.310 INCHES MINIMUM AND 0.377 INCHES MAXIMUM |
CMLP | Thread Quantity Per Inch | 24 |
THSD | Thread Series Designator | UNJF |