Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
476488 | 3 - Design Control Reference | 2 - Production Item | UNITED TECHNOLOGIES CORPORATION | 77445 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
53 | 5306 | 000528272 | A003B0 | 04905 | X | K | A | N | U | 1 Jan 1961 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive - Reference Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZU01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZW01 | 1 Dec 1995 |
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
2 | KZ | 0 | 15 May 1971 |
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
Defense Supply Center Philadelphia, Philadelphia, PA 19101
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
U | 573 | Z | 9 | A | B | Z | W | 093486 | Z | 48950 | BOLTS-NUTS-OR-SCREWS--NOI--SUB-3- |
50
Bolts or Nuts (Iron or Steel), (less than 35 feet)
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
No special handling required.
Variable Rating
No Variation. NMFC and UFCC Match.
DLA Troop Support, Philadelphia, PA 19111 ** No longer valid for input **
DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED. Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Unclassified
50
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
Department of the Navy
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AATC | Extended Washer Diameter | 0.815 INCHES MINIMUM AND 0.835 INCHES MAXIMUM |
AATD | Extended Washer Thickness | 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM |
AASB | Fastener Length | 1.165 INCHES MINIMUM AND 1.185 INCHES MAXIMUM |
CQFM | Hardness Rating | 30.0 ROCKWELL C MINIMUM OVERALL AND 38.0 ROCKWELL C MAXIMUM OVERALL |
AASU | Head Height | 0.415 INCHES MINIMUM AND 0.435 INCHES MAXIMUM |
AASK | Head Style | DOUBLE HEXAGON W/HOLE |
CRHC | Hole Configuration Style | ROUND |
AAUB | Hole Diameter | 0.062 INCHES NOMINAL |
ASXK | Hole Quantity | 6 |
BQDM | Hole Type | DRILLED |
MATT | Material | STEEL COMP 601 OVERALL |
AHYM | Nominal Thread Diameter | 0.312 INCHES |
MDCL | Material Document And Classification | AMS6304 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
AATN | Shoulder Diameter | 0.387 INCHES MINIMUM FIRST SHOULDER AND 0.389 INCHES MAXIMUM FIRST SHOULDER |
AATX | Shoulder Length | 0.674 INCHES MINIMUM FIRST SHOULDER AND 0.676 INCHES MAXIMUM FIRST SHOULDER |
CWYB | Shoulder Shape | ROUND FIRST SHOULDER |
AATB | Width Between Flats | 0.616 INCHES MINIMUM AND 0.627 INCHES MAXIMUM |
SFTT | Surface Treatment | NICKEL OVERALL AND CADMIUM OVERALL |
AAJD | Thread Class | 1A |
AAJF | Thread Direction | RIGHT-HAND |
AASA | Thread Length | 0.500 INCHES MINIMUM |
CMLP | Thread Quantity Per Inch | 24 |
THSD | Thread Series Designator | UNF |