Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
MS21250-09030 | 3 - Design Control Reference | 2 - Production Item | NATIONAL AEROSPACE STANDARDS | 80205 | |
VFK100G-09030 | 5 - Replaced / Discontinued | 2 - Production Item | VALLEY-TODECO, INC. | 06710 | |
MS21250-09030 | 5 - Replaced / Discontinued | 2 - Production Item | SPS TECHNOLOGIES, LLC | 27624 | |
MS21250-09030 | 5 - Replaced / Discontinued | 2 - Production Item | LISI AEROSPACE CANADA CORP | L4528 | |
MS21250-09030 | 5 - Replaced / Discontinued | 2 - Production Item | HI-SHEAR CORPORATION | 73197 | |
MS21250-09030 | 5 - Replaced / Discontinued | 2 - Production Item | ALL MANUFACTURERS INC. | 57472 | |
MS21250-09030 | 5 - Replaced / Discontinued | 2 - Production Item | HUCK INTERNATIONAL, INC. | 17446 | |
MS21250-09030 | 5 - Replaced / Discontinued | 2 - Production Item | DALIS H L INC | 07610 | |
MS21250-09030 | 5 - Replaced / Discontinued | 2 - Production Item | ALCOA GLOBAL FASTENERS, INC. | 06950 | |
MS21250-09030 | 5 - Replaced / Discontinued | 2 - Production Item | SPS TECHNOLOGIES LLC | 06725 | |
MS2125009030 | 5 - Replaced / Discontinued | 2 - Production Item | SPS TECHNOLOGIES, LLC | 56878 | |
MS21250-09030 | 5 - Replaced / Discontinued | 2 - Production Item | TEXTRON FASTENING SYSTEMS | 93907 | |
MS21250-09030 | 5 - Replaced / Discontinued | 9 - No Longer Used | MERCURY AEROSPACE FASTENERS INC | 50945 | |
MS21250-09030 | 5 - Replaced / Discontinued | 9 - No Longer Used | HUCK INTL INC | 97928 | |
MS2125009030 | 5 - Replaced / Discontinued | 9 - No Longer Used | HUCK INTL INC | 97928 | |
MS21250-09030 | 5 - Replaced / Discontinued | 9 - No Longer Used | MILITARY STANDARDS | 96906 | |
MS21250-09030 | 5 - Replaced / Discontinued | 9 - No Longer Used | ALCOA GLOBAL FASTENERS, INC. | 92215 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
53 | 5306 | 002249320 | A003B0 | 15903 | X | 1 | A | N | U | 1 Apr 1970 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZS01 | 1 Feb 2004 | |||||||||||||||||||||||||||||
FXGI | FXKZ | 1 | G | Z | SX | 1 Jun 2005 | ||||||||||||||||||||||||
N9BZ | N9ZD | 1 | G | Z | HD | GT | HD | 1 Jun 2005 | ||||||||||||||||||||||
YB01 | 1 May 2006 | |||||||||||||||||||||||||||||
ZB01 | 1 Sep 2006 | |||||||||||||||||||||||||||||
ZU01 | 1 Mar 2008 | |||||||||||||||||||||||||||||
ZH01 | 1 Oct 2009 | |||||||||||||||||||||||||||||
ZA01 | 1 Jan 2011 | |||||||||||||||||||||||||||||
WP01 | 1 Jul 2011 | |||||||||||||||||||||||||||||
YA01 | 1 May 2012 | |||||||||||||||||||||||||||||
ZC01 | 1 Apr 2013 | |||||||||||||||||||||||||||||
YC01 | 1 Jul 2015 | |||||||||||||||||||||||||||||
ZT01 | 1 Jul 2015 | |||||||||||||||||||||||||||||
ZR01 | 1 Dec 2015 |
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
Oklahoma City Air Logistics Center, Tinker AFB, OK 73145-3043
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 2 | 4 | ZZ | MS21250-09030 | 80205 | |||||||
5 | 2 | 4 | KZ | MS2125009030 | 56878 | |||||||
5 | 2 | 4 | KZ | MS21250-09030 | 57472 | |||||||
5 | 2 | 4 | KZ | MS21250-09030 | 73197 | |||||||
4 | 5 | 2 | 5 | KZ | D | VFK100G-09030 | 06710 | |||||
5 | 2 | 4 | KZ | MS21250-09030 | 06725 | |||||||
5 | 2 | 4 | KZ | MS21250-09030 | 06950 | |||||||
5 | 2 | 4 | KZ | MS21250-09030 | 07610 | |||||||
5 | 2 | 4 | ZZ | MS21250-09030 | 17446 | |||||||
5 | 2 | 4 | KZ | MS21250-09030 | 27624 | |||||||
5 | 2 | 4 | KZ | MS21250-09030 | 93907 | |||||||
5 | 2 | 4 | ZZ | MS21250-09030 | L4528 | |||||||
3 | 5 | 9 | 4 | KZ | D | MS21250-09030 | 96906 | |||||
5 | 9 | 4 | KZ | MS21250-09030 | 97928 | |||||||
5 | 9 | 4 | KZ | MS2125009030 | 97928 | |||||||
5 | 9 | 4 | KZ | B | MS21250-09030 | 50945 | ||||||
5 | 9 | 4 | KZ | MS21250-09030 | 92215 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
USA
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
Defense Supply Center Philadelphia, Philadelphia, PA 19101
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
2 | KZ | 0 | 1 Dec 1974 |
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
Defense Supply Center Philadelphia, Philadelphia, PA 19101
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
KZ | 573 | Z | 9 | A | B | Z | W | 093486 | Z | 48950 | BOLTS-NUTS-OR-SCREWS--NOI--SUB-3- |
Defense Supply Center Philadelphia, Philadelphia, PA 19101
Bolts or Nuts (Iron or Steel), (less than 35 feet)
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
No special handling required.
Variable Rating
No Variation. NMFC and UFCC Match.
Defense Logistics Agency, Enterprise Business Systems
DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED. Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
Unclassified
1
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
Department of the Air Force
Department of the Navy
Defense Logistics Agency
Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
---|---|---|---|---|---|---|---|---|---|---|---|
P | P | 10 | 1 | AAA | 0.3 lbs | 0.002 cu ft |
Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
---|---|---|---|---|---|---|---|---|---|---|---|
00 | X | D3 | D3 | 00 | E | Q | O |
Primary Inventory Control Activity (PICA)
Primary Inventory Control Activity (PICA)
Physical protection
Any suitable process that is not injurious to the item.
No requirement
As required to protect the item or elements of the package
PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.
PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.
No special marking
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AATC | Extended Washer Diameter | 0.928 INCHES MINIMUM AND 0.938 INCHES MAXIMUM |
AATD | Extended Washer Thickness | 0.133 INCHES NOMINAL |
AASB | Fastener Length | 2.747 INCHES NOMINAL |
AAUR | Grip Diameter | 0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM |
ANEE | Grip Length | 1.865 INCHES MINIMUM AND 1.885 INCHES MAXIMUM |
CQFM | Hardness Rating | 39.0 ROCKWELL C MINIMUM OVERALL AND 43.0 ROCKWELL C MAXIMUM OVERALL |
AASU | Head Height | 0.557 INCHES NOMINAL |
AASK | Head Style | DOUBLE HEXAGON W/HOLE |
MATT | Material | STEEL COMP E4340 OVERALL OR STEEL COMP 4340 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP 4140 OVERALL |
CQBC | Minimum Tensile Strength | 180000 POUNDS PER SQUARE INCH |
AHYM | Nominal Thread Diameter | 0.562 INCHES |
AATB | Width Between Flats | 0.616 INCHES MINIMUM AND 0.627 INCHES MAXIMUM |
STDC | Surface Treatment Document And Classification | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
SFTT | Surface Treatment | CADMIUM OVERALL AND CHROMATE OVERALL |
AAJD | Thread Class | 3A |
AAJF | Thread Direction | RIGHT-HAND |
AASA | Thread Length | 0.862 INCHES MINIMUM AND 0.882 INCHES MAXIMUM |
CMLP | Thread Quantity Per Inch | 18 |
THSD | Thread Series Designator | UNJF |