- FSG 53 - Hardware and Abrasives
- FSC 5306 - Bolts
- NSN 5306-01-200-2066
5306-01-200-2066
BOLT,SHEAR
5306-01-200-2066 (5306012002066, 012002066)
Part Numbers (5 listings): NAS6604D16 | CIPRD-NAS6604D16 | Z00.N5106572316 | BACB30NF4D16 | NAS1304-16D |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| NAS6604D16 | 3 - Design Control Reference | 2 - Production Item | NATIONAL AEROSPACE STANDARDS | 80205 |  |
| CIPRD-NAS6604D16 | 5 - Replaced / Discontinued | 2 - Production Item | CALIFORNIA SCREW PRODUCTS CORP. | 8Z507 |  |
| CIPRD-NAS6604D16 | 5 - Replaced / Discontinued | 2 - Production Item | AEROSPACE MANUFACTURING, INC. | 0E0Z8 | |
| CIPRD-NAS6604D16 | 5 - Replaced / Discontinued | 2 - Production Item | SATURN FASTENERS INC | 0K6Z0 | |
| CIPRD-NAS6604D16 | 5 - Replaced / Discontinued | 2 - Production Item | 3-V FASTENER CO., INC. | 1ER65 | |
| Z00.N5106572316 | 5 - Replaced / Discontinued | 2 - Production Item | SOCATA | F0086 |  |
| BACB30NF4D16 | 5 - Replaced / Discontinued | 9 - No Longer Used | THE BOEING COMPANY | 81205 |  |
| NAS6604D16 | 5 - Replaced / Discontinued | 9 - No Longer Used | STANDARD AERO PARTS, INC. | 1DN91 |  |
| NAS1304-16D | C - Advisory Reference | 1 - Incomplete Part Number | NATIONAL AEROSPACE STANDARDS | 80205 | |
| NAS1304-16D | C - Advisory Reference | 1 - Incomplete Part Number | NATIONAL AEROSPACE STANDARDS | 80205 | |
| NAS1304-16D | C - Advisory Reference | 1 - Incomplete Part Number | NATIONAL AEROSPACE STANDARDS | 80205 | |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
C - Advisory Reference
Reference Number Category Code (DRN_2910)
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
1 - Incomplete Part Number
Reference Number Variation Code (DRN_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 53 | 5306 | 012002066 | A003B0 | 15903 | F | 1 | A | N | A | 0 | 31 Jan 1985 |
A003B0
Federal Item Identification Guide (FIIG_4065)
15903
Item Naming Code (INC_4080)
31 Jan 1985
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
F
Item Criticality (CRITL_CD_FIIG_3843)
The item is an Aviation Critical Safety Item/Flight Safety Critical Aircraft Part ((ACSI/FSCAP).
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
0
ADPE Identification Code (ADPEC_0801)
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| YB01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZA01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZE01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZG01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZK01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZT01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZH01 | 1 Jul 1993 | |||||||||||||||||||||||||||||
| ZF01 | 1 Dec 1993 | |||||||||||||||||||||||||||||
| ZB01 | 1 Aug 1994 | |||||||||||||||||||||||||||||
| ZN01 | 1 Dec 1995 | |||||||||||||||||||||||||||||
| ZR01 | 1 Jul 1997 | |||||||||||||||||||||||||||||
| YW01 | 1 Aug 1997 | |||||||||||||||||||||||||||||
| ZW01 | 1 Nov 1998 | |||||||||||||||||||||||||||||
| YA01 | 1 Jul 2001 | |||||||||||||||||||||||||||||
| WU01 | 1 Nov 2002 | |||||||||||||||||||||||||||||
| WP01 | 1 Aug 2005 | |||||||||||||||||||||||||||||
| A919 | A187 | 1 | T | Z | CT | CT | 1 Apr 2006 | |||||||||||||||||||||||
| FXGI | FXKZ | 1 | T | Z | SX | 1 Apr 2006 | ||||||||||||||||||||||||
| N9BZ | N9ZD | 1 | T | Z | GH | GT | KE | 1 Apr 2006 | ||||||||||||||||||||||
| ZU01 | 1 May 2008 | |||||||||||||||||||||||||||||
| YC01 | 1 Jun 2015 | |||||||||||||||||||||||||||||
| C920 | 1 | T | 1 Jul 2016 | |||||||||||||||||||||||||||
| YD01 | 1 Oct 2016 | |||||||||||||||||||||||||||||
1
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
T
Acquisition Method Suffix Code (AMSC_2876)
Acquisition of this part is controlled by QPL procedures. Valid AMCs: 1 and 2.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
CT
Item Management Coding Activity (IMC_ACTY_2748)
U.S. Army Aviation and Missile Command (AIR) Redstone Arsenal, AL 35898-5230
SX
Item Management Coding Activity (IMC_ACTY_2748)
Oklahoma City Air Logistics Center, Tinker AFB, OK 73145-3043
GH
Item Management Coding Activity (IMC_ACTY_2748)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
KE Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval ICP, Philadelphia, PA 19111
CT
Supplementary Receivers (SUPPLM_RCVR_2534)
U.S. Army Aviation and Missile Command (AIR) Redstone Arsenal, AL 35898-5230
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 2 | 4 | KZ | NAS6604D16 | 80205 | | ||||||
| 4 | 5 | 2 | 4 | ZF | A | Z00.N5106572316 | F0086 | | ||||
| 5 | 2 | 5 | ZZ | CIPRD-NAS6604D16 | 8Z507 | | ||||||
| 5 | 2 | 5 | ZZ | CIPRD-NAS6604D16 | 0E0Z8 | | ||||||
| 5 | 2 | 5 | ZZ | CIPRD-NAS6604D16 | 0K6Z0 | | ||||||
| 5 | 2 | 5 | ZZ | CIPRD-NAS6604D16 | 1ER65 | | ||||||
| 5 | 9 | 4 | KZ | B | BACB30NF4D16 | 81205 | | |||||
| 4 | 5 | 9 | 6 | 9Z | B | NAS6604D16 | 1DN91 | | ||||
| C | 1 | E | KZ | BV | NAS1304-16D | 80205 | | |||||
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
4
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
KZ
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
4
Reference Number Format Code (RNFC_2920)
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
ZF
Reference Number Action Activity Code (RNAAC_2900)
France
A
Reference Number Status Code (RNSC_2923)
Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
6
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
9Z
Reference Number Action Activity Code (RNAAC_2900)
DLIS-K, Battle Creek, MI 49037-3084
C
Reference Number Category Code (RNCC_2910)
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
1
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
E
Document Availability Code (DAC_2640)
The reference number is represented by engineering data other than an engineering drawing. The data is available for unlimited use and will be furnished by the activity identified by the RNAAC upon request.
BV
Service / Agency Designator Code (SADC_4672)
Army / Air Force / Navy
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 1 | KZ | 0 | 3 | KZ | 1 | 4 Oct 1990 | 5306008128634 | 22 Oct 1990 |
1
Item Standardization Code (ISC_2650)
An item authorized for procurement as a result of a formal item reduction study and accepted as a replacement for one or more items not authorized for procurement. In addition, in generic relationships, a code 1 item is related to a code 2 item.
KZ
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
3
Replaced / Replacement Item Standardization Code (ISC_2650)
An item which, as a result of a formal item reduction study, is accepted as not authorized for procurement.
1
Replaced / Replacement NIIN Status Code (NIIN_STAT_CD_2670)
Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. See volume 4, chapter 4.9.Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.
4 Oct 1990
Date of Replacement Standardization Decision (DT_STDZN_DEC_2300)
5306-00-812-8634
Replaced / Replacement NSN (RP_NSN_STD_RL_8977 / RPLM_NSN_STDZ_9525)
22 Oct 1990
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| KH | 573 | Z | 9 | A | B | Z | W | 093486 | Z | 48950 | BOLTS-NUTS-OR-SCREWS--NOI--SUB-3- |
KH
Originating Activity Code (ORIG_ACTY_CD_4210)
Defense Industrial Supply Center, Philadelphia, PA 19111
573
Water Commodity Code (WRT_CMDTY_CD_9275)
Bolts or Nuts (Iron or Steel), (less than 35 feet)
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
B
Air Commodity Code (AIR_CMTY_HDLG_9215)
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
W
Less Than Truckload (CLAS_RTNG_CD_2770)
Variable Rating
093486
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
Z
NMFC Sub Item Number (SUB_ITM_NBR_0861)
48950
Uniform Freight Classification (UFC_CD_MODF_3040)
BOLTS-NUTS-OR-SCREWS--NOI--SUB-3-
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
| Unit Price | MOE | SOS | AAC | CIIC | QUP | Reparability | UI | SLC |
|---|---|---|---|---|---|---|---|---|
| DA | SMS | D | U | 1 | Z | EA | 0 | |
| DF | SMS | D | U | 1 | N | EA | 0 | |
| DN | SMS | D | U | 1 | EA | 0 | ||
| DS | SMS | D | U | 1 | N | EA | 0 | |
| GP | SMS | D | U | 1 | EA | 0 |
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
D
Acquisition Advice Code (AAC_2507)
DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED. Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
Z
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
ARMY: This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item; MARINE CORPS: Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code; NAVY: Special Program Consumables
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
N
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
DA
Service / Agency Code (MOE_CD_2833)
Department of the Army
DF
Service / Agency Code (MOE_CD_2833)
Department of the Air Force
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
GP
Service / Agency Code (MOE_CD_2833)
U.S. Coast Guard
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 10 | 1 | AAA | 0.1 lbs | 0.006 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | 00 | 00 | 0 | D3 | D3 | 00 | E | Q | O |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
10
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Physical protection
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
AAA
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
0.1 lbs
Unit Pack Weight (UP_WT_5153)
0.006 cu ft
Unit Pack Cube (UP_CU_5155)
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
00
Wrapping Material Code (WRAP_MAT_CD_5163)
No requirement
00
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
No requirement
0
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
Not Applicable
D3
Unit Container Code (UNIT_CTNR_CD_5166)
PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.
D3
Intermediate Container Code (INTMD_CTNR_CD_5167)
PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
E
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
O
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| CRZS | Distance From Head Largest Bearing Surface To Shank Hole Center | 1.222 INCHES MINIMUM FIRST HOLE AND 1.272 INCHES MAXIMUM FIRST HOLE |
| AASB | Fastener Length | 1.410 INCHES MINIMUM AND 1.440 INCHES MAXIMUM |
| AAUR | Grip Diameter | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| ANEE | Grip Length | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| CQFM | Hardness Rating | 36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| AASU | Head Height | 0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| AASK | Head Style | DISHED HEXAGON |
| MDCL | Material Document And Classification | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
| MATT | Material | STEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL |
| CQBC | Minimum Tensile Strength | 160000 POUNDS PER SQUARE INCH |
| AHYM | Nominal Thread Diameter | 0.250 INCHES |
| AAWB | Shank Unthreaded Hole Diameter | 0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE |
| AATB | Width Between Flats | 0.429 INCHES MINIMUM AND 0.439 INCHES MAXIMUM |
| ZZZK | Specification/Standard Data | 80205-NAS6604 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| CSYM | Surface Finish | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | Surface Finish | 32.0 MICROINCHES GRIP |
| CSYM | Surface Finish | 32.0 MICROINCHES THREADS |
| STDC | Surface Treatment Document And Classification | QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT | Surface Treatment | CADMIUM OVERALL AND CHROMATE OVERALL |
| AAJD | Thread Class | 3A |
| AAJF | Thread Direction | RIGHT-HAND |
| AASA | Thread Length | 0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| THSD | Thread Series Designator | UNJF |
| CMLP | Thread Quantity Per Inch | 28 |
Back to TopBack to Top
