- FSG 53 - Hardware and Abrasives
- FSC 5306 - Bolts
- NSN 5306-01-628-5336
5306-01-628-5336
BOLT,CLOSE TOLERANCE
5306-01-628-5336 (5306016285336, 016285336)
Part Numbers (4 listings): 3M1277E6D11A | TX1027E6D11A | 11861E6D11A | WC1277E6D11A |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 3M1277E6D11A | 3 - Design Control Reference | 2 - Production Item | VALLEY-TODECO, INC. | 06710 |  |
| TX1027E6D11A | 3 - Design Control Reference | 2 - Production Item | SPS TECHNOLOGIES LLC | 06725 |  |
| TX1027E6D11A | 3 - Design Control Reference | 2 - Production Item | ALCOA GLOBAL FASTENERS, INC. | 06950 |  |
| 3M1277E6D11A | 3 - Design Control Reference | 2 - Production Item | SATURN FASTENERS INC | 0K6Z0 |  |
| 3M1277E6D11A | 3 - Design Control Reference | 2 - Production Item | HEARTLAND PRECISION FASTENERS, INC. | 0ZC92 |  |
| 3M1277E6D11A | 3 - Design Control Reference | 2 - Production Item | B & B SPECIALTIES INC. | 1EM77 | |
| 3M1277E6D11A | 3 - Design Control Reference | 2 - Production Item | HOUSTON PRECISION FASTENER L.L.C. | 1VSL7 | |
| TX1027E6D11A | 3 - Design Control Reference | 2 - Production Item | SPS TECHNOLOGIES, LLC | 27624 |  |
| 3M1277E6D11A | 3 - Design Control Reference | 2 - Production Item | CAMCAR LLC | 4WL75 | |
| TX1027E6D11A | 3 - Design Control Reference | 2 - Production Item | SPS TECHNOLOGIES, LLC | 56878 |  |
| 3M1277E6D11A | 3 - Design Control Reference | 2 - Production Item | EMHART TEKNOLOGIES LLC | 58998 |  |
| 11861E6D11A | 3 - Design Control Reference | 2 - Production Item | REID PRODUCTS INC. | 59563 |  |
| WC1277E6D11A | 3 - Design Control Reference | 2 - Production Item | WEST COAST AEROSPACE INC | 60516 |  |
| TX1027E6D11A | 3 - Design Control Reference | 2 - Production Item | HI-SHEAR CORPORATION | 73197 |  |
| TX1027E6D11A | 3 - Design Control Reference | 2 - Production Item | SPS TECHNOLOGIES, LLC | 80539 |  |
| 3M1277E6D11A | 7 - Vendor Item Drawing Reference | 2 - Production Item | BOEING COMPANY, THE | 76301 |  |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
7 - Vendor Item Drawing Reference
Reference Number Category Code (DRN_2910)
Vendor Item Drawing Reference (formerly Specification Control Reference). The number assigned by a design activity to a drawing that is not item-identifying, but which delineates existing commercial or vendor-developed items meeting all engineering and test requirements specified, without imposing additional test/engineering requirements not normally provided by the vendor(s). Includes only those drawings which meet the definition for Vendor Item Drawing in MIL-STD 100. Vendor Item Drawing References are administrative control numbers and shall not be used as part identification numbers.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 53 | 5306 | 016285336 | A003B0 | 27851 | Y | 1 | A | N | A | A | 0 | 29 May 2014 |
A003B0
Federal Item Identification Guide (FIIG_4065)
27851
Item Naming Code (INC_4080)
29 May 2014
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
Y
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature but does have other critical feature(s) such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
A
Electrostatic Discharge Code (ESD_EMI_CD_2043)
No known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
0
ADPE Identification Code (ADPEC_0801)
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| N9BZ | 1 | C | Z | KE | KE | 1 May 2014 | ||||||||||||||||||||||||
1
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
C
Acquisition Method Suffix Code (AMSC_2876)
This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
KE
Item Management Coding Activity (IMC_ACTY_2748)
Naval ICP, Philadelphia, PA 19111
KE Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval ICP, Philadelphia, PA 19111
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 2 | 5 | ZZ | 3M1277E6D11A | 06710 | | ||||||
| 3 | 2 | 5 | ZZ | TX1027E6D11A | 06725 | | ||||||
| 3 | 2 | 5 | ZZ | TX1027E6D11A | 06950 | | ||||||
| 3 | 2 | 5 | ZZ | 3M1277E6D11A | 0K6Z0 | | ||||||
| 3 | 2 | 5 | ZZ | 3M1277E6D11A | 0ZC92 | | ||||||
| 3 | 2 | 5 | ZZ | 3M1277E6D11A | 1EM77 | | ||||||
| 3 | 2 | 5 | ZZ | 3M1277E6D11A | 1VSL7 | | ||||||
| 3 | 2 | 5 | ZZ | TX1027E6D11A | 27624 | | ||||||
| 3 | 2 | 5 | ZZ | 3M1277E6D11A | 4WL75 | | ||||||
| 3 | 2 | 5 | ZZ | TX1027E6D11A | 56878 | | ||||||
| 3 | 2 | 5 | ZZ | 3M1277E6D11A | 58998 | | ||||||
| 3 | 2 | 5 | ZZ | 11861E6D11A | 59563 | | ||||||
| 3 | 2 | 5 | ZZ | WC1277E6D11A | 60516 | | ||||||
| 3 | 2 | 5 | ZZ | TX1027E6D11A | 73197 | | ||||||
| 3 | 2 | 5 | ZZ | TX1027E6D11A | 80539 | | ||||||
| 7 | 2 | A | ZZ | 3M1277E6D11A | 76301 | | ||||||
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
7
Reference Number Category Code (RNCC_2910)
Vendor Item Drawing Reference (formerly Specification Control Reference). The number assigned by a design activity to a drawing that is not item-identifying, but which delineates existing commercial or vendor-developed items meeting all engineering and test requirements specified, without imposing additional test/engineering requirements not normally provided by the vendor(s). Includes only those drawings which meet the definition for Vendor Item Drawing in MIL-STD 100. Vendor Item Drawing References are administrative control numbers and shall not be used as part identification numbers.
A
Document Availability Code (DAC_2640)
The reference number is represented by an engineering drawing and the drawing is available for unlimited use. The drawing will be furnished by the activity identified by the RNAAC upon request.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 5 | 97 | 0 | 29 May 2014 |
5
Item Standardization Code (ISC_2650)
An item authorized for procurement that has not yet been subject to item standardization.
97
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
DLIS-LFF, Battle Creek, MI 49037-3084
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
29 May 2014
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| KE | 573 | Z | 9 | A | A | Z | W | 093486 | Z | 48950 | BOLTS-NUTS-OR-SCREWS--NOI--SUB-3- |
KE
Originating Activity Code (ORIG_ACTY_CD_4210)
Naval ICP, Philadelphia, PA 19111
573
Water Commodity Code (WRT_CMDTY_CD_9275)
Bolts or Nuts (Iron or Steel), (less than 35 feet)
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
A
Air Commodity Code (AIR_CMTY_HDLG_9215)
Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft instruments and laboratory test equipment, aerial targets and gliders, aircraft/missile technical order compliance kits, etc
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
W
Less Than Truckload (CLAS_RTNG_CD_2770)
Variable Rating
093486
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
Z
NMFC Sub Item Number (SUB_ITM_NBR_0861)
48950
Uniform Freight Classification (UFC_CD_MODF_3040)
BOLTS-NUTS-OR-SCREWS--NOI--SUB-3-
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
Z
Acquisition Advice Code (AAC_2507)
INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM. Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 10 | 1 | AAA |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | 00 | 00 | 0 | 10 | D3 | 00 | E | Q | O |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
10
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Physical protection
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
AAA
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
Unit Pack Weight (UP_WT_5153)
Unit Pack Cube (UP_CU_5155)
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
00
Wrapping Material Code (WRAP_MAT_CD_5163)
No requirement
00
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
No requirement
0
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
Not Applicable
10
Unit Container Code (UNIT_CTNR_CD_5166)
Any suitable container included in this table may be used (see J.4.9.1).
D3
Intermediate Container Code (INTMD_CTNR_CD_5167)
PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
E
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
O
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CRTL | Criticality Code Justification | AGAV |
| AASB | Fastener Length | 1.264 INCHES MINIMUM AND 1.267 INCHES MAXIMUM |
| CBBL | Features Provided | CETYL ALCOHOL LUBRICANT |
| AAUR | Grip Diameter | 0.3896 INCHES MINIMUM AND 0.3901 INCHES MAXIMUM |
| ANEE | Grip Length | 0.6875 INCHES NOMINAL |
| AASU | Head Height | 0.075 INCHES NOMINAL |
| AASL | Head Diameter | 0.5504 INCHES MINIMUM AND 0.5604 INCHES MAXIMUM |
| AASK | Head Style | FLAT COUNTERSUNK |
| AAUB | Hole Diameter | 0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM |
| ASXK | Hole Quantity | 1 |
| BQDM | Hole Type | DRILLED |
| AGAV | End Item Identification | F18 E/F |
| MATT | Material | NICKEL ALLOY 718 OVERALL |
| AHYM | Nominal Thread Diameter | 0.375 INCHES |
| CFSG | Nonstandard Thread Pitch Diameter | +0.3450 TO 0.3479 INCHES |
| ABQZ | Internal Drive Style | TORX |
| CXCY | Part Name Assigned By Controlling Agency | BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS, INCONEL 718 (125 KSI SHEAR), 0.0156 INCH OVERSIZE |
| CMLP | Thread Quantity Per Inch | 24 |
| THSD | Thread Series Designator | UNJF |
| SFTT | Surface Treatment | PASSIVATE OVERALL |
| AAJD | Thread Class | 3A |
| AAJF | Thread Direction | RIGHT-HAND |
| AASA | Thread Length | 0.578 INCHES NOMINAL |
Back to TopBack to Top
