- FSG 53 - Hardware and Abrasives
- FSC 5307 - Studs
- NSN 5307-00-279-8273
5307-00-279-8273
STUD,WELDING
5307-00-279-8273 (5307002798273, 002798273)
Part Numbers (5 listings): CPR109479-2 | CPR109479-5 | CPR109479-7 | 3/8-F107 | 3/8X1.5000CFL |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| CPR109479-2 | 1 - Source of Control Reference | 2 - Production Item | U S ARMY TANK AUTOMOTIVE COMMAND | 19207 |  |
| CPR109479-2 | 3 - Design Control Reference | 2 - Production Item | NELSON STUD WELDING, INC. | 85105 |  |
| CPR109479-5 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | U S ARMY TANK AUTOMOTIVE COMMAND | 19207 | |
| CPR109479-7 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | U S ARMY TANK AUTOMOTIVE COMMAND | 19207 | |
| 3/8-F107 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | NELSON STUD WELDING, INC. | 85105 | |
| 3/8X1.5000CFL | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | NELSON STUD WELDING, INC. | 85105 | |
1 - Source of Control Reference
Reference Number Category Code (DRN_2910)
Source of Control Reference. The number assigned by a design control manufacturer of an end item of equipment, including a Government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for Source Control Drawing in MIL-STD-100. (Applicable only to type 1, 1B, 2, 4 and 4B item identifications.)
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
1 - Incomplete Part Number
Reference Number Variation Code (DRN_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 53 | 5307 | 002798273 | A051A0 | 16944 | X | 1 | A | N | U | 10 Aug 1973 |
A051A0
Federal Item Identification Guide (FIIG_4065)
16944
Item Naming Code (INC_4080)
10 Aug 1973
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A919 | A187 | 1 | B | Z | AZ | 1 Mar 2006 | ||||||||||||||||||||||||
| N9BZ | 1 | B | Z | GH | GG | GT | 1 Dec 2013 | |||||||||||||||||||||||
1
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
B
Acquisition Method Suffix Code (AMSC_2876)
Acquisition of this part is restricted to source(s) specified on "Source Control", "Altered Item" or "Selected Item" drawings/documents. Valid AMCs: 1, 2, 3, 4 and 5.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
AZ
Item Management Coding Activity (IMC_ACTY_2748)
U.S. Army Tank-Automotive and Armaments, Command, Warren, MI 48397-5000
GH
Item Management Coding Activity (IMC_ACTY_2748)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
GG Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval Inventory Control Point, Philadelphia, PA 19111û5098
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 1 | 2 | 1 | AZ | D | CPR109479-2 | 19207 | | ||||
| 3 | 2 | 5 | ZZ | CPR109479-2 | 85105 | | ||||||
| 5 | 1 | 1 | ZZ | CPR109479-5 | 19207 | | ||||||
| 5 | 1 | 1 | ZZ | CPR109479-7 | 19207 | | ||||||
| 5 | 1 | 1 | ZZ | 3/8-F107 | 85105 | | ||||||
| 5 | 1 | 1 | ZZ | 3/8X1.5000CFL | 85105 | | ||||||
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
1
Reference Number Category Code (RNCC_2910)
Source of Control Reference. The number assigned by a design control manufacturer of an end item of equipment, including a Government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for Source Control Drawing in MIL-STD-100. (Applicable only to type 1, 1B, 2, 4 and 4B item identifications.)
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
1
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
AZ
Reference Number Action Activity Code (RNAAC_2900)
U.S. Army Tank-Automotive and Armaments, Command, Warren, MI 48397-5000
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
1
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 6 | KZ | 0 | 12 Jun 1974 |
6
Item Standardization Code (ISC_2650)
An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
KZ
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
12 Jun 1974
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AZ | Q | 713 | Z | 9 | A | V | Z | Q | 095190 | J | 49790 | HARDWARE--NOI-SUB-9 |
AZ
Originating Activity Code (ORIG_ACTY_CD_4210)
U.S. Army Tank-Automotive and Armaments, Command, Warren, MI 48397-5000
Q
Less Than Carload (LCL_CD_2760)
70
713
Water Commodity Code (WRT_CMDTY_CD_9275)
Metal Hardware
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
V
Air Commodity Code (AIR_CMTY_HDLG_9215)
Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
095190
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
J
NMFC Sub Item Number (SUB_ITM_NBR_0861)
49790
Uniform Freight Classification (UFC_CD_MODF_3040)
HARDWARE--NOI-SUB-9
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
J
Acquisition Advice Code (AAC_2507)
NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
Z
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
ARMY: This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item; MARINE CORPS: Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code; NAVY: Special Program Consumables
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
N
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
DA
Service / Agency Code (MOE_CD_2833)
Department of the Army
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 10 | 1 | AAA |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | 00 | 00 | 0 | 10 | D3 | 00 | E | Q | O |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
10
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Physical protection
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
AAA
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
Unit Pack Weight (UP_WT_5153)
Unit Pack Cube (UP_CU_5155)
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
00
Wrapping Material Code (WRAP_MAT_CD_5163)
No requirement
00
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
No requirement
0
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
Not Applicable
10
Unit Container Code (UNIT_CTNR_CD_5166)
Any suitable container included in this table may be used (see J.4.9.1).
D3
Intermediate Container Code (INTMD_CTNR_CD_5167)
PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
E
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
O
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AKYN | Furnished Items And Quantity | ONE (1) FERRULE,SHOULDERED,0.505 IN.MINOR DIA BY 0.156 IN. LG,AND 0.640IN. MAJOR DIA BY0.234 IN.LG |
| MATT | Material | STEEL |
| CQJX | Nominal Thread Size | 0.375 INCHES NUT THREAD |
| ADDF | Length Excluding Fluxed Welding Tip | 1.500 INCHES NOMINAL |
| ADDD | Unthreaded End Diameter | 0.330 INCHES NOMINAL |
| ADDE | Unthreaded End Length | 0.120 INCHES NOMINAL |
| STYL | Style Designator | WELDING |
| STDC | Surface Treatment Document And Classification | QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE STUD THD |
| SFTT | Surface Treatment | CADMIUM STUD THD |
| AAJF | Thread Direction | RIGHT-HAND NUT THREAD |
| AAJD | Thread Class | 2A NUT THREAD |
| AASA | Thread Length | 1.380 INCHES NOMINAL NUT THREAD |
| CMLP | Thread Quantity Per Inch | 16 NUT THREAD |
| THSD | Thread Series Designator | UNC NUT THREAD |
Back to TopBack to Top
