- FSG 53 - Hardware and Abrasives
- FSC 5310 - Nuts and Washers
- NSN 5310-00-543-3825
5310-00-543-3825
NUT,SELF-LOCKING,PLATE
5310-00-543-3825 (5310005433825, 005433825)
Part Numbers (7 listings): MS21048-06K | K1031-06BC | T2C632BC | R2000C06K | 12700-62BC | 702A1-62 | LHTA51-2860-62BC |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| MS21048-06K | 2 - Definitive Specification or Standard Document | 2 - Production Item | MILITARY STANDARDS | 96906 |  |
| K1031-06BC | 5 - Replaced / Discontinued | 2 - Production Item | SATAIR A/S | R1120 |  |
| T2C632BC | 5 - Replaced / Discontinued | 9 - No Longer Used | REPUBLIC FASTENER MFG. CORP. Use | 71087 |  |
| K1031-06BC | 5 - Replaced / Discontinued | 9 - No Longer Used | ALCOA GLOBAL FASTENERS, INC. | 75237 |  |
| R2000C06K | 5 - Replaced / Discontinued | 9 - No Longer Used | REPUBLIC FASTENER MFG. CORP. | 52828 |  |
| 12700-62BC | 5 - Replaced / Discontinued | 9 - No Longer Used | SPS TECHNOLOGIES, LLC | 80539 |  |
| 12700-62BC | 5 - Replaced / Discontinued | 9 - No Longer Used | SPS TECHNOLOGIES, LLC | 56878 |  |
| 702A1-62 | 5 - Replaced / Discontinued | 9 - No Longer Used | HONEYWELL INTERNATIONAL INC. | 99193 |  |
| K1031-06BC | 5 - Replaced / Discontinued | 9 - No Longer Used | ALCOA GLOBAL FASTENERS, INC. | 15653 |  |
| T2C632BC | 5 - Replaced / Discontinued | 9 - No Longer Used | SPS TECHNOLOGIES, LLC | 11815 |  |
| LHTA51-2860-62BC | 5 - Replaced / Discontinued | 9 - No Longer Used | HARVARD INDUSTRIES INC | 72962 |  |
2 - Definitive Specification or Standard Document
Reference Number Category Code (DRN_2910)
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 53 | 5310 | 005433825 | A021A0 | 05280 | X | 1 | A | N | S | 0 | 2 Oct 1974 |
A021A0
Federal Item Identification Guide (FIIG_4065)
05280
Item Naming Code (INC_4080)
2 Oct 1974
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
S
Precious Metals Indicator Code (PMIC_0802)
Item contains silver.
0
ADPE Identification Code (ADPEC_0801)
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZG01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZH01 | 1 Mar 2000 | |||||||||||||||||||||||||||||
| ZU01 | 1 Jun 2005 | |||||||||||||||||||||||||||||
| FXGI | FXKZ | 1 | G | Z | SX | 1 Jun 2005 | ||||||||||||||||||||||||
| N9BZ | N9ZD | 1 | G | Z | GH | GT | KE | 1 Jun 2005 | ||||||||||||||||||||||
| ZW01 | 1 Nov 2005 | |||||||||||||||||||||||||||||
1
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
G
Acquisition Method Suffix Code (AMSC_2876)
The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
SX
Item Management Coding Activity (IMC_ACTY_2748)
Oklahoma City Air Logistics Center, Tinker AFB, OK 73145-3043
GH
Item Management Coding Activity (IMC_ACTY_2748)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
KE Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval ICP, Philadelphia, PA 19111
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 2 | 2 | 4 | 9Z | D | MS21048-06K | 96906 | | ||||
| 4 | 5 | 2 | 6 | ZG | D | K1031-06BC | R1120 | | ||||
| 3 | 5 | 9 | 5 | 9Z | B | 702A1-62 | 99193 | | ||||
| 4 | 5 | 9 | 4 | KZ | B | T2C632BC | 11815 | | ||||
| 5 | 9 | 4 | KZ | K1031-06BC | 15653 | | ||||||
| 4 | 5 | 9 | 5 | KZ | D | R2000C06K | 52828 | | ||||
| 4 | 5 | 9 | 4 | KZ | B | 12700-62BC | 56878 | | ||||
| 5 | 9 | 4 | KZ | T2C632BC | 71087 | | ||||||
| 4 | 5 | 9 | 4 | KZ | D | LHTA51-2860-62BC | 72962 | | ||||
| 4 | 5 | 9 | 4 | KZ | B | K1031-06BC | 75237 | | ||||
| 5 | 9 | 4 | KZ | 12700-62BC | 80539 | | ||||||
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
2
Reference Number Category Code (RNCC_2910)
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
4
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
9Z
Reference Number Action Activity Code (RNAAC_2900)
DLIS-K, Battle Creek, MI 49037-3084
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
4
Reference Number Format Code (RNFC_2920)
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
6
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
ZG
Reference Number Action Activity Code (RNAAC_2900)
Germany
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
KZ
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 2 | KZ | 0 | 1 Dec 1974 |
2
Item Standardization Code (ISC_2650)
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
KZ
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
1 Dec 1974
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZG | J | 713 | Z | 9 | A | B | Z | J | 093480 | X | 48950 | BOLTS-NUTS-METAL-SILVER-PLATED |
ZG
Originating Activity Code (ORIG_ACTY_CD_4210)
Germany
J
Less Than Carload (LCL_CD_2760)
100.2
713
Water Commodity Code (WRT_CMDTY_CD_9275)
Metal Hardware
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
B
Air Commodity Code (AIR_CMTY_HDLG_9215)
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
093480
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
X
NMFC Sub Item Number (SUB_ITM_NBR_0861)
48950
Uniform Freight Classification (UFC_CD_MODF_3040)
BOLTS-NUTS-METAL-SILVER-PLATED
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
V
Acquisition Advice Code (AAC_2507)
TERMINAL ITEM. Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
0
Quantity Unit Pack (QUP_6106)
No QUP
Z
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
ARMY: This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item; MARINE CORPS: Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code; NAVY: Special Program Consumables
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
Z
Acquisition Advice Code (AAC_2507)
INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM. Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
N
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
DA
Service / Agency Code (MOE_CD_2833)
Department of the Army
DF
Service / Agency Code (MOE_CD_2833)
Department of the Air Force
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 10 | 1 | AAA | 0.1 lbs | 0.001 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | 00 | 00 | 0 | 10 | 00 | E | O |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
10
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Physical protection
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
AAA
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
0.1 lbs
Unit Pack Weight (UP_WT_5153)
0.001 cu ft
Unit Pack Cube (UP_CU_5155)
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
00
Wrapping Material Code (WRAP_MAT_CD_5163)
No requirement
00
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
No requirement
0
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
Not Applicable
10
Unit Container Code (UNIT_CTNR_CD_5166)
Any suitable container included in this table may be used (see J.4.9.1).
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
E
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
O
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| ADFY | Center To Center Distance Between Mounting Holes Along Length | 0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| ADFW | Distance From Aperture Center To Mounting Hole Center | 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| CQFM | Hardness Rating | 49.0 ROCKWELL C MAXIMUM |
| MATT | Material | IRON ALLOY 660 OVERALL |
| ABTB | Mounting Hole Diameter | 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| ADFU | Mounting Hole Arrangement Style | 2 HOLES |
| CSSM | Mounting Hole Countersink Angle | 98.0 DEGREES MINIMUM AND 102.0 DEGREES MAXIMUM |
| ADFR | Mounting Provision Location | OPPOSITE NUT PROJECTION SIDE |
| CQJX | Nominal Thread Size | 0.138 INCHES |
| ADEA | Nut Height | 0.171 INCHES MINIMUM |
| ACTA | Nut Style | PLATE |
| ACVN | Nut Length | 0.948 INCHES MAXIMUM |
| ADFP | Nut Mounting Provision | COUNTERSUNK HOLES |
| AAUM | Locking Feature | PREVAILING TORQUE ALL METAL DESIGN |
| MDCL | Material Document And Classification | AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| ADEB | Plate Thickness | 0.047 INCHES MINIMUM |
| ADEC | Plate Width | 0.239 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| PMLC | Precious Material And Location | ALL SURFACES SILVER |
| PRMT | Precious Material | SILVER |
| STDC | Surface Treatment Document And Classification | AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SFTT | Surface Treatment | SILVER OVERALL |
| AZKQ | Temp Rating | 800.0 DEG FAHRENHEIT MAXIMUM |
| AAJD | Thread Class | 3B |
| AAJF | Thread Direction | RIGHT-HAND |
| CMLP | Thread Quantity Per Inch | 32 |
| BZRR | Thread Series | UNJC |
Back to TopBack to Top
