Summary

FSG 53 / FSC 5310

DEMIL: A

DEMIL INT: 1

HMIC: N

Date Created: 1 Jan 1962

MSDS: None

Hazmat: None

;

MASTER CROSS REFERENCE LIST (MCRL) | NSN 5310-00-836-1807 Submit RFQ

Manufacturer Part Number	RNCC	RNVC	Manufacturer Name	CAGE
9175339	1 - Source of Control Reference	2 - Production Item	U S ARMY AVIATION AND MISSILE	18876
G12 BLACK	3 - Design Control Reference	2 - Production Item	HOFFMAN ENGINEERING CORPORATION	06097
G12	5 - Replaced / Discontinued	1 - Incomplete Part Number	HOFFMAN ENGINEERING CORPORATION	06097
MS25381-2BLACK	5 - Replaced / Discontinued	9 - No Longer Used	MILITARY STANDARDS	96906

Code Definitions

1 - Source of Control Reference

Reference Number Category Code (DRN_2910)

Source of Control Reference. The number assigned by a design control manufacturer of an end item of equipment, including a Government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for Source Control Drawing in MIL-STD-100. (Applicable only to type 1, 1B, 2, 4 and 4B item identifications.)

3 - Design Control Reference

Reference Number Category Code (DRN_2910)

Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.

5 - Replaced / Discontinued

Reference Number Category Code (DRN_2910)

Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.

2 - Production Item

Reference Number Variation Code (DRN_4780)

A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.

1 - Incomplete Part Number

Reference Number Variation Code (DRN_4780)

A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.

9 - No Longer Used

Reference Number Variation Code (DRN_4780)

A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.

FLIS - SEG A - IDENTIFICATION | NSN 5310-00-836-1807 Submit RFQ

FSG	FSC	NIIN	FIIG	INC	CRITICALITY	TYPE OF ITEM	MRC	DEMIL	HMIC	EDC	PMIC	ADPEC	DATE CREATED
53	5310	008361807	A021A0	15886	X	4	3	A	N		U		1 Jan 1962

Code Definitions

53 Federal Supply Group (FSG_3994/FSC_WI_FSG_3996)

Hardware and Abrasives

5310

Federal Supply Class (FSC_3994/FSC_WI_FSC_3996)

Nuts and Washers

008361807

National Item Identification Number (NCB_CD_4130/I_I_NBR_4131)

NSN 5310-00-836-1807

A021A0

Federal Item Identification Guide (FIIG_4065)

15886

Item Naming Code (INC_4080)

1 Jan 1962

NIIN Assignment Date (DT_NIIN_ASGMT_2180)

X

Item Criticality (CRITL_CD_FIIG_3843)

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

4 Type of Item Identification (TYP_II_4820)

Partial Descriptive Item Identification (Type 1 Concept)

3 Reference / Partial Descriptive Method Reason Code (RPDMRC_4765)

An approved item name and FIIG exist but the item involved is so unique in design that it cannot be fully described in accordance with the FIIG.

A

Demilitarization Code (DEMIL_CD_0167)

Non-MLI/ Non-SLI — Demilitarization not required.

N

Hazardous Material Indicator Code (HMIC_0865)

Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.

U

Precious Metals Indicator Code (PMIC_0802)

Precious Metal Content is unknown.

Similar & Related NSN Parts

5310-00-224-0645 5310-00-225-3428 5310-00-226-2744 5310-00-231-1467 5310-00-232-3010 5310-00-057-7158 5310-00-059-7073 5310-00-065-1948 5310-00-066-9394 5310-00-023-1205 5310-00-145-1992 5310-00-145-1998 5310-00-149-8550 5310-00-150-3706

FLIS - SEG B - MOE RULE DATA | NSN 5310-00-836-1807 Submit RFQ

MOE Rule	Former MOE	AMC	AMSC	NIMSC	IMC	IMC Activity	AAC	DSOR				Collaborators									Receivers									Effective Date
ZU01																														1 Aug 1995

Code Definitions

FLIS - SEG C - REFERENCE NUMBER | NSN 5310-00-836-1807 Submit RFQ

RNFC	RNCC	RNVC	DAC	RNAAC	RNSC	Reference Number	CAGE
4	1	2	2	9Z	D	9175339	18876
1	3	2	2	9Z	A	G12 BLACK	06097
4	5	1	4	9Z	A	G12	06097
4	5	9	4	9Z	B	MS25381-2BLACK	96906

Code Definitions

4 Reference Number Format Code (RNFC_2920)

Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.

1 Reference Number Category Code (RNCC_2910)

2 Reference Number Variation Code (RNVC_4780)

2 Document Availability Code (DAC_2640)

The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the drawing.

9Z

Reference Number Action Activity Code (RNAAC_2900)

DLIS-K, Battle Creek, MI 49037-3084

D

Reference Number Status Code (RNSC_2923)

Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.

1 Reference Number Format Code (RNFC_2920)

Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .

3 Reference Number Category Code (RNCC_2910)

A

Reference Number Status Code (RNSC_2923)

Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.

5 Reference Number Category Code (RNCC_2910)

1 Reference Number Variation Code (RNVC_4780)

4 Document Availability Code (DAC_2640)

The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.

9 Reference Number Variation Code (RNVC_4780)

B

Reference Number Status Code (RNSC_2923)

Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.

FLIS - SEG E - ITEM STANDARDIZATION DATA | NSN 5310-00-836-1807 Submit RFQ

ISC	Originator	NIIN Status	Replaced / Replacement ISC	Replaced / Replacement Originator	Replacement NIIN Status	Replacement Date	Replaced / Replacement NSN	Decision Date
6	KZ	0						30 Aug 1966

Code Definitions

6 Item Standardization Code (ISC_2650)

An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.

KZ

Originator of Standardization Decision (ORG_STDZN_DEC_9325)

Defense Supply Center Philadelphia, Philadelphia, PA 19101

0 NIIN Status Code (NIIN_STAT_CD_2670)

Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.

30 Aug 1966

Standardization Decision Date (DT_STDZN_DEC_2300)

FLIS - SEG G - FREIGHT DATA | NSN 5310-00-836-1807 Submit RFQ

Integrity	Originating	HMC	LCL	WCC	TCC	SHC	ADC	ACC	ASH	LTL	NMFC	NMFC Sub Item	UFC	Freight Description	Rail Variance
			Q	713	Z	9	A	B	Z	Q	013540	X	05680	ALUM-NUTS

Code Definitions

XX

Originating Activity Code (ORIG_ACTY_CD_4210)

Q

Less Than Carload (LCL_CD_2760)

713 Water Commodity Code (WRT_CMDTY_CD_9275)

Metal Hardware

Z

Type Cargo Code (TYPE_CGO_CD_9260)

No special type of cargo code applicable

9 Special Handling Code (SP_HDLG_CD_9240)

No special handling required

A

Air Dimension Code (AIR_DIM_CD_9220)

Shipment is not a consolidation and does not exceed 72 inches in any dimension.

B

Air Commodity Code (AIR_CMTY_HDLG_9215)

Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.

Z

Air Special Handling Code (AIR_CMTY_HDLG_9215)

No special handling required.

013540

National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)

X

NMFC Sub Item Number (SUB_ITM_NBR_0861)

05680

Uniform Freight Classification (UFC_CD_MODF_3040)

ALUM-NUTS

Freight Description (FRT_DESC_4020)

Rail Variance

Rail Variance (RAIL_VARI_CD_4760)

No Variation. NMFC and UFCC Match.

FLIS - SEG M/V - CHARACTERISTICS DATA | NSN 5310-00-836-1807 Submit RFQ

MRC	Decoded Requirement	Clear Text Reply
MDCL	Material Document And Classification	QQ-A-365/3,T3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL OR QQ-A-225/3,T3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATT	Material	ALUMINUM ALLOY 2011 OVERALL
CQJX	Nominal Thread Size	0.250 INCHES
ACTD	Nut Diameter	0.309 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
ACTA	Nut Style	KNURLED
ADBG	Nut Thickness	0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM
ADBK	Knurl Width	0.078 INCHES MINIMUM
ADBL	Small End Length	0.068 INCHES MINIMUM AND 0.088 INCHES MAXIMUM
ABPH	Small End Diameter	0.305 INCHES MINIMUM AND 0.308 INCHES MAXIMUM
ZZZK	Specification/Standard Data	18876-9175339 MANUFACTURERS SOURCE CONTROL
STDC	Surface Treatment Document And Classification	171,FINISH 7.2.2 BLACK MIL STD SINGLE TREATMENT RESPONSE OVERALL
SFTT	Surface Treatment	ANODIZE OVERALL
AAJD	Thread Class	2B
AAJF	Thread Direction	LEFT-HAND
BZRR	Thread Series	UNEF
CMLP	Thread Quantity Per Inch	32

Questions?

Want to know more about our Defense Services?

Contact Us. We are here to help.

Questions?

Have any questions regarding a Request For Quote?

Contact Us. We are here to help.

Questions?

Ask about our Supply Management Services.

Contact Us. We are here to help.

Search for a specific FSG, FSC, CAGE code or PS Issue

Tutorials

5310-00-836-1807

NUT,PLAIN,KNURLED

5310-00-836-1807 (5310008361807, 008361807)

Part Numbers (4 listings): 9175339 | G12BLACK | G12 | MS25381-2BLACK |

FSG 53 / FSC 5310

DEMIL: A

DEMIL INT: 1

HMIC: N

Date Created: 1 Jan 1962

MSDS: None

Hazmat: None

1 - Source of Control Reference

Reference Number Category Code (DRN_2910)

3 - Design Control Reference

Reference Number Category Code (DRN_2910)

5 - Replaced / Discontinued

Reference Number Category Code (DRN_2910)

2 - Production Item

Reference Number Variation Code (DRN_4780)

1 - Incomplete Part Number

Reference Number Variation Code (DRN_4780)

9 - No Longer Used

Reference Number Variation Code (DRN_4780)

Federal Supply Group (FSG_3994/FSC_WI_FSG_3996)

Federal Supply Class (FSC_3994/FSC_WI_FSC_3996)

National Item Identification Number (NCB_CD_4130/I_I_NBR_4131)

Federal Item Identification Guide (FIIG_4065)

Item Naming Code (INC_4080)

1 Jan 1962

NIIN Assignment Date (DT_NIIN_ASGMT_2180)

X

Item Criticality (CRITL_CD_FIIG_3843)

4

Type of Item Identification (TYP_II_4820)

3

Reference / Partial Descriptive Method Reason Code (RPDMRC_4765)

A

Demilitarization Code (DEMIL_CD_0167)

N

Hazardous Material Indicator Code (HMIC_0865)

U

Precious Metals Indicator Code (PMIC_0802)

4

Reference Number Format Code (RNFC_2920)

1

Reference Number Category Code (RNCC_2910)

2

Reference Number Variation Code (RNVC_4780)

2

Document Availability Code (DAC_2640)

9Z

Reference Number Action Activity Code (RNAAC_2900)

D

Reference Number Status Code (RNSC_2923)

1

Reference Number Format Code (RNFC_2920)

3

Reference Number Category Code (RNCC_2910)

A

Reference Number Status Code (RNSC_2923)

5

Reference Number Category Code (RNCC_2910)

1

Reference Number Variation Code (RNVC_4780)

4

Document Availability Code (DAC_2640)

9

Reference Number Variation Code (RNVC_4780)

B

Reference Number Status Code (RNSC_2923)

6

Item Standardization Code (ISC_2650)

KZ

Originator of Standardization Decision (ORG_STDZN_DEC_9325)

0

NIIN Status Code (NIIN_STAT_CD_2670)

30 Aug 1966

Standardization Decision Date (DT_STDZN_DEC_2300)