- FSG 53 - Hardware and Abrasives
- FSC 5315 - Nails, Machine Keys, and Pins
- NSN 5315-00-051-2372
5315-00-051-2372
PIN,QUICK RELEASE
5315-00-051-2372 (5315000512372, 000512372)
Part Numbers (6 listings): MS17987-423 | BL4R23S | BLS4R23SM | LGSR2300 | LG4SR23M | SLS4R23 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| MS17987-423 | 2 - Definitive Specification or Standard Document | 2 - Production Item | MILITARY STANDARDS | 96906 |  |
| BL4R23S | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | AVIBANK MFG., INC. | 84256 |  |
| BLS4R23SM | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | AVIBANK MFG., INC. | 84256 | |
| LGSR2300 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | HARTWELL CORPORATION | 83014 |  |
| LG4SR23M | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | HARTWELL CORPORATION | 83014 | |
| SLS4R23 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | SPACELOK INC. | 16258 |  |
| MS17987-423 | 5 - Replaced / Discontinued | 2 - Production Item | ALCOA FASTENING SYSTEMS | C4293 |  |
2 - Definitive Specification or Standard Document
Reference Number Category Code (DRN_2910)
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
1 - Incomplete Part Number
Reference Number Variation Code (DRN_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 53 | 5315 | 000512372 | A212A0 | 08323 | X | 1 | A | N | A | 0 | 1 Jan 1960 |
A212A0
Federal Item Identification Guide (FIIG_4065)
08323
Item Naming Code (INC_4080)
1 Jan 1960
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
0
ADPE Identification Code (ADPEC_0801)
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZP01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZW01 | 1 Dec 1995 | |||||||||||||||||||||||||||||
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4 | 5 | 1 | 5 | KZ | D | SLS4R23 | 16258 | | ||||
| 4 | 5 | 1 | 5 | KZ | D | LG4SR23M | 83014 | | ||||
| 4 | 5 | 1 | 5 | KZ | D | LGSR2300 | 83014 | | ||||
| 4 | 5 | 1 | 5 | KZ | D | BL4R23S | 84256 | | ||||
| 4 | 5 | 1 | 5 | KZ | D | BLS4R23SM | 84256 | | ||||
| 4 | 5 | 2 | 3 | ZG | A | MS17987-423 | C4293 | | ||||
4
Reference Number Format Code (RNFC_2920)
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
1
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
KZ
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
3
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the technical documentation upon request.
ZG
Reference Number Action Activity Code (RNAAC_2900)
Germany
A
Reference Number Status Code (RNSC_2923)
Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 3 | KZ | 1 | 1 | KZ | 0 | 10 Sep 1977 | 5315003769034 | 24 Nov 1985 |
3
Item Standardization Code (ISC_2650)
An item which, as a result of a formal item reduction study, is accepted as not authorized for procurement.
KZ
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
1
NIIN Status Code (NIIN_STAT_CD_2670)
Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. See volume 4, chapter 4.9.Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.
1
Replaced / Replacement Item Standardization Code (ISC_2650)
An item authorized for procurement as a result of a formal item reduction study and accepted as a replacement for one or more items not authorized for procurement. In addition, in generic relationships, a code 1 item is related to a code 2 item.
0
Replaced / Replacement NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
10 Sep 1977
Date of Replacement Standardization Decision (DT_STDZN_DEC_2300)
5315-00-376-9034
Replaced / Replacement NSN (RP_NSN_STD_RL_8977 / RPLM_NSN_STDZ_9525)
24 Nov 1985
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 713 | Z | 9 | A | B | Z | Q | 095190 | J | 49790 | HARDWARE--NOI-SUB-9 |
XX
Originating Activity Code (ORIG_ACTY_CD_4210)
713
Water Commodity Code (WRT_CMDTY_CD_9275)
Metal Hardware
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
B
Air Commodity Code (AIR_CMTY_HDLG_9215)
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
Q
Less Than Truckload (CLAS_RTNG_CD_2770)
70
095190
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
J
NMFC Sub Item Number (SUB_ITM_NBR_0861)
49790
Uniform Freight Classification (UFC_CD_MODF_3040)
HARDWARE--NOI-SUB-9
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | 10 | 1 | 000 |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | 00 | 00 | 0 | D3 | 00 | E | Q | M |
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
10
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Physical protection
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
000
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
Unit Pack Weight (UP_WT_5153)
Unit Pack Cube (UP_CU_5155)
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
00
Wrapping Material Code (WRAP_MAT_CD_5163)
No requirement
00
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
No requirement
0
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
Not Applicable
D3
Unit Container Code (UNIT_CTNR_CD_5166)
PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.
00
Intermediate Container Code (INTMD_CTNR_CD_5167)
No requirement.
E
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
M
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AFLW | Actuation Method | PUSH BUTTON |
| APCM | Actuation Type | PUSH |
| ABRM | Detent Quantity | 2 |
| CTXT | Detent To Tapered End Distance | 0.260 INCHES MINIMUM AND 0.290 INCHES MAXIMUM |
| ANEE | Grip Length | 2.300 INCHES MINIMUM AND 2.320 INCHES MAXIMUM |
| CQFM | Hardness Rating | 36.0 ROCKWELL C MINIMUM SHANK AND 40.0 ROCKWELL C MAXIMUM SHANK |
| CQFM | Hardness Rating | 36.0 ROCKWELL C MINIMUM SPINDLE AND 40.0 ROCKWELL C MAXIMUM SPINDLE |
| AASL | Head Diameter | 0.310 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| MDCL | Material Document And Classification | MIL-T-6736 MIL SPEC SINGLE MATERIAL RESPONSE SHANK OR MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE SHANK |
| MDCL | Material Document And Classification | MIL-T-6736 MIL SPEC SINGLE MATERIAL RESPONSE SPINDLE OR MIL-T-6758 MIL SPEC SINGLE MATERIAL RESPONSE SPINDLE |
| MATT | Material | STEEL COMP 4130 SHANK |
| MATT | Material | STEEL COMP 4130 SPINDLE |
| ABQC | Ring Handle Diameter | 1.060 INCHES MINIMUM |
| AAZE | Shank Diameter | 0.2470 INCHES MINIMUM AND 0.2485 INCHES MAXIMUM |
| CRQD | Shoulder To Head End Distance | 0.780 INCHES MINIMUM |
| CTDJ | Pin Attachment Type | HOOK OR RING |
| STYL | Style Designator | RING HANDLE |
| STDC | Surface Treatment Document And Classification | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE SHANK |
| STDC | Surface Treatment Document And Classification | QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE SPINDLE |
| SFTT | Surface Treatment | CADMIUM SHANK AND CHROMATE SHANK |
| SFTT | Surface Treatment | CADMIUM SPINDLE AND CHROMATE SPINDLE |
Back to TopBack to Top
