Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
51399S12T30MS | 3 - Design Control Reference | 2 - Production Item | AVIBANK MFG., INC. | 84256 | ![]() |
51399S12T30MS | 5 - Replaced / Discontinued | 2 - Production Item | SATAIR A/S | R1120 | ![]() |
51399S12T30MS | 5 - Replaced / Discontinued | 9 - No Longer Used | B E AEROSPACE CONSUMABLESMANAGEMENT | F7652 | ![]() |
51399S12T30MS | C - Advisory Reference | 1 - Incomplete Part Number | C.M.P. | FB009 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
53 | 5315 | 002333040 | A212A0 | 08323 | X | K | A | N | U | 23 May 1973 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive - Reference Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZF01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZG01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZW01 | 1 Nov 2005 |
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 3 | 2 | 4 | ZF | D | 51399S12T30MS | 84256 | ![]() | ||||
4 | 5 | 2 | 6 | ZG | D | 51399S12T30MS | R1120 | ![]() | ||||
4 | 5 | 9 | 4 | ZF | B | 51399S12T30MS | F7652 | ![]() | ||||
4 | C | 1 | 4 | ZZ | A | 9F | 51399S12T30MS | FB009 | ![]() |
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
France
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
Germany
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
USA
Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.
CAGE Status Change
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
5 | 98 | 0 | 1 Feb 1975 |
An item authorized for procurement that has not yet been subject to item standardization.
DLIS-LFF, Battle Creek, MI 49037-3084
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZF | Q | 713 | Z | 9 | A | B | Z | Q | 095190 | J | 49790 | HARDWARE--NOI-SUB-9 |
France
70
Metal Hardware
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
No special handling required.
No Variation. NMFC and UFCC Match.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AFLW | Actuation Method | PUSH BUTTON |
APCM | Actuation Type | PUSH |
ABRM | Detent Quantity | 2 |
CTXT | Detent To Tapered End Distance | 0.355 INCHES MINIMUM AND 0.433 INCHES MAXIMUM |
ANEE | Grip Length | 1.182 INCHES MINIMUM AND 1.202 INCHES MAXIMUM |
AASN | Handle Length | 2.008 INCHES MINIMUM AND 2.086 INCHES MAXIMUM |
CQFM | Hardness Rating | 58.0 ROCKWELL C MINIMUM DETENT AND 62.0 ROCKWELL C MAXIMUM DETENT |
MDCL | Material Document And Classification | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE SHANK OR MIL-T-6736 MIL SPEC SINGLE MATERIAL RESPONSE SHANK |
MDCL | Material Document And Classification | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE SPINDLE |
MDCL | Material Document And Classification | QQ-A-351 FED SPEC SINGLE MATERIAL RESPONSE BUTTON |
MDCL | Material Document And Classification | QQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE HANDLE |
MDCL | Material Document And Classification | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE RING |
MDCL | Material Document And Classification | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE DETENT |
MDCL | Material Document And Classification | QQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE SPRING |
MATT | Material | ALUMINUM ALLOY HANDLE |
MATT | Material | ALUMINUM ALLOY 2017 BUTTON |
MATT | Material | STEEL COMP 4130 SHANK |
MATT | Material | STEEL COMP 4130 SPINDLE |
MATT | Material | STEEL CORROSION RESISTING DETENT |
MATT | Material | STEEL RING |
MATT | Material | STEEL SPRING |
AAZE | Shank Diameter | 0.4693 INCHES MINIMUM AND 0.4708 INCHES MAXIMUM |
CQSX | Shear Strength | 28777 DOUBLE POUNDS PER SQUARE INCH |
CRQD | Shoulder To Head End Distance | 1.417 INCHES MAXIMUM |
CTDJ | Pin Attachment Type | RING |
FEAT | Special Features | HANDLE BLACK,BUTTON GOLD |
STYL | Style Designator | T HANDLE |
STDC | Surface Treatment Document And Classification | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE BUTTON |
STDC | Surface Treatment Document And Classification | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE HANDLE |
STDC | Surface Treatment Document And Classification | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE DETENT |
STDC | Surface Treatment Document And Classification | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE SHANK |
STDC | Surface Treatment Document And Classification | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE SPINDLE |
STDC | Surface Treatment Document And Classification | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE SPRING |
STDC | Surface Treatment Document And Classification | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE RING |
SFTT | Surface Treatment | ANODIZE BUTTON |
SFTT | Surface Treatment | ANODIZE HANDLE |
SFTT | Surface Treatment | CADMIUM RING |
SFTT | Surface Treatment | CADMIUM SHANK |
SFTT | Surface Treatment | CADMIUM SPINDLE |
SFTT | Surface Treatment | CADMIUM SPRING |
SFTT | Surface Treatment | PASSIVATE DETENT |