- FSG 53 - Hardware and Abrasives
- FSC 5315 - Nails, Machine Keys, and Pins
- NSN 5315-00-276-4154
5315-00-276-4154
PIN,GROOVED,HEADED
5315-00-276-4154 (5315002764154, 002764154)
Part Numbers (11 listings): 5226855 | N12848PC15 | N21061PC15 | NX14347PC15 | N6596PC15 | N4871PC15 | N5847PC15 | N9871PC15 | N9870PC15 | N8848PC15 | K5226855 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 5226855 | 3 - Design Control Reference | 9 - No Longer Used | GENERAL MOTORS CORP | 72915 |  |
| 5226855 | 5 - Replaced / Discontinued | 2 - Production Item | HATCH & KIRK, INC. | 55380 |  |
| N12848PC15 | 5 - Replaced / Discontinued | 2 - Production Item | HATCH & KIRK, INC. | 55380 | |
| N21061PC15 | 5 - Replaced / Discontinued | 9 - No Longer Used | HATCH & KIRK, INC. | 55380 | |
| N21061PC15 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 24617 |  |
| NX14347PC15 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 24617 | |
| N12848PC15 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 24617 | |
| N6596PC15 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 24617 | |
| N4871PC15 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 24617 | |
| N5847PC15 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 24617 | |
| N9871PC15 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 24617 | |
| N9870PC15 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 24617 | |
| N8848PC15 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 24617 | |
| 5226855 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 24617 | |
| 5226855 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 71934 | |
| 5226855 | 5 - Replaced / Discontinued | 9 - No Longer Used | MTU AMERICA INC. | 72582 |  |
| K5226855 | 5 - Replaced / Discontinued | 9 - No Longer Used | KORODY-COLYER CORP | 18954 | |
| NX14347PC15 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 72915 | |
| N12848PC15 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 72915 | |
| N21061PC15 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 72915 | |
| N9871PC15 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 72915 | |
| N9870PC15 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 72915 | |
| N5847PC15 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 72915 | |
| N6596PC15 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 72915 | |
| N4871PC15 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 72915 | |
| N8848PC15 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL MOTORS CORP | 72915 | |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 53 | 5315 | 002764154 | A212A0 | 02382 | X | 1 | A | N | U | 1 Jan 1963 |
A212A0
Federal Item Identification Guide (FIIG_4065)
02382
Item Naming Code (INC_4080)
1 Jan 1963
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| YB01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| YJ01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZC01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZH01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZU01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZR01 | 1 Jul 1997 | |||||||||||||||||||||||||||||
| ZW01 | 1 Nov 1998 | |||||||||||||||||||||||||||||
| YA01 | 1 Dec 2001 | |||||||||||||||||||||||||||||
| A919 | A187 | 1 | R | Z | CD | 1 Aug 2005 | ||||||||||||||||||||||||
| N9BZ | NIZD | 1 | R | Z | GH | HD | 1 Aug 2005 | |||||||||||||||||||||||
1
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
R
Acquisition Method Suffix Code (AMSC_2876)
The data or the rights to use the data needed to purchase this part from additional sources are not owned by the Government and it has been determined that it is uneconomical to purchase them. Valid AMCs: 1, 2, 3, 4 and 5.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
CD
Item Management Coding Activity (IMC_ACTY_2748)
U.S. Army War Reserve Command, New Cumberland, PA 17070-5008
GH
Item Management Coding Activity (IMC_ACTY_2748)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
HD Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 3 | 9 | 5 | KZ | D | 5226855 | 72915 | | ||||
| 5 | 2 | 5 | KZ | 5226855 | 55380 | | ||||||
| 5 | 2 | 5 | KZ | N12848PC15 | 55380 | | ||||||
| 5 | 9 | 5 | KZ | N21061PC15 | 55380 | | ||||||
| 3 | 5 | 9 | 5 | KZ | D | 5226855 | 71934 | | ||||
| 3 | 5 | 9 | 6 | KZ | D | 5226855 | 72582 | | ||||
| 3 | 5 | 9 | 5 | KZ | B | N12848PC15 | 72915 | | ||||
| 3 | 5 | 9 | 5 | KZ | B | N21061PC15 | 72915 | | ||||
| 3 | 5 | 9 | 5 | KZ | D | N4871PC15 | 72915 | | ||||
| 3 | 5 | 9 | 5 | KZ | D | N5847PC15 | 72915 | | ||||
| 3 | 5 | 9 | 2 | KZ | D | N6596PC15 | 72915 | | ||||
| 3 | 5 | 9 | 5 | KZ | D | N8848PC15 | 72915 | | ||||
| 3 | 5 | 9 | 2 | KZ | D | N9870PC15 | 72915 | | ||||
| 3 | 5 | 9 | 5 | KZ | D | N9871PC15 | 72915 | | ||||
| 3 | 5 | 9 | 5 | KZ | D | NX14347PC15 | 72915 | | ||||
| 4 | 5 | 9 | 1 | KZ | B | K5226855 | 18954 | | ||||
| 3 | 5 | 9 | 5 | KZ | D | 5226855 | 24617 | | ||||
| 3 | 5 | 9 | 5 | KZ | D | N12848PC15 | 24617 | | ||||
| 3 | 5 | 9 | 1 | KZ | D | N21061PC15 | 24617 | | ||||
| 3 | 5 | 9 | 5 | KZ | D | N4871PC15 | 24617 | | ||||
| 3 | 5 | 9 | 5 | KZ | D | N5847PC15 | 24617 | | ||||
| 3 | 5 | 9 | 2 | KZ | D | N6596PC15 | 24617 | | ||||
| 3 | 5 | 9 | 5 | KZ | D | N8848PC15 | 24617 | | ||||
| 3 | 5 | 9 | 2 | KZ | D | N9870PC15 | 24617 | | ||||
| 3 | 5 | 9 | 5 | KZ | D | N9871PC15 | 24617 | | ||||
| 3 | 5 | 9 | 5 | KZ | D | NX14347PC15 | 24617 | | ||||
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
KZ
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
6
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
2
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the drawing.
4
Reference Number Format Code (RNFC_2920)
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
1
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 6 | KZ | 0 | 10 Dec 1981 |
6
Item Standardization Code (ISC_2650)
An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
KZ
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
10 Dec 1981
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 713 | Z | 9 | A | B | Z | Q | 095190 | J | 49790 | HARDWARE--NOI-SUB-9 |
XX
Originating Activity Code (ORIG_ACTY_CD_4210)
713
Water Commodity Code (WRT_CMDTY_CD_9275)
Metal Hardware
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
B
Air Commodity Code (AIR_CMTY_HDLG_9215)
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
Q
Less Than Truckload (CLAS_RTNG_CD_2770)
70
095190
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
J
NMFC Sub Item Number (SUB_ITM_NBR_0861)
49790
Uniform Freight Classification (UFC_CD_MODF_3040)
HARDWARE--NOI-SUB-9
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
J
Acquisition Advice Code (AAC_2507)
NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
Z
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
ARMY: This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item; MARINE CORPS: Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code; NAVY: Special Program Consumables
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
N
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
DA
Service / Agency Code (MOE_CD_2833)
Department of the Army
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 10 | 1 | AAA | 0.1 lbs |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | 00 | 00 | 0 | 10 | D3 | 00 | E | Q | O |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
10
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Physical protection
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
AAA
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
0.1 lbs
Unit Pack Weight (UP_WT_5153)
Unit Pack Cube (UP_CU_5155)
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
00
Wrapping Material Code (WRAP_MAT_CD_5163)
No requirement
00
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
No requirement
0
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
Not Applicable
10
Unit Container Code (UNIT_CTNR_CD_5166)
Any suitable container included in this table may be used (see J.4.9.1).
D3
Intermediate Container Code (INTMD_CTNR_CD_5167)
PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
E
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
O
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| ABRE | Distance From Centerline Of Hole To End Of Pin | 1.634 INCHES NOMINAL |
| ABNZ | Effective Length | 1.0620 INCHES MINIMUM AND 1.0635 INCHES MAXIMUM |
| ABMZ | Diameter | 0.524 INCHES MINIMUM AND 0.528 INCHES MAXIMUM |
| AAGZ | First End Style | CHAMFERED |
| CRMG | First End Taper Angle | 45.0 DEGREES NOMINAL |
| AMCS | First End Taper Length | 0.031 INCHES NOMINAL |
| ABRC | First Hole Diameter | 0.123 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| ANEE | Grip Length | 1.125 INCHES NOMINAL |
| CQFM | Hardness Rating | 60.0 ROCKWELL C NOMINAL OVERALL |
| AASK | Head Style | DOUBLE CHAMFER |
| HGTH | Height | 0.152 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| ABRB | Hole Arrangement Style | ONE END DRILLED |
| MATT | Material | STEEL COMP 1010 OVERALL OR STEEL COMP 1015 OVERALL |
| CRRG | Pin Head Diameter | 0.719 INCHES NOMINAL |
| ABPA | Undercut Diameter | 0.508 INCHES MINIMUM AND 0.512 INCHES MAXIMUM |
| ABPB | Under Head Length | 2.757 INCHES MINIMUM AND 2.759 INCHES MAXIMUM |
| ABPC | Undercut Width | 0.125 INCHES NOMINAL |
| STYL | Style Designator | GROOVE |
Back to TopBack to Top
