- FSG 53 - Hardware and Abrasives
- FSC 5315 - Nails, Machine Keys, and Pins
- NSN 5315-00-349-7573
5315-00-349-7573
PIN,QUICK RELEASE
5315-00-349-7573 (5315003497573, 003497573)
Part Numbers (4 listings): MS17988C412 | DLC4T12N | BLC5T12N | LM4CT12M |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| MS17988C412 | 3 - Design Control Reference | 2 - Production Item | NATIONAL AEROSPACE STANDARDS | 80205 |  |
| MS17988C412 | 5 - Replaced / Discontinued | 2 - Production Item | ALCOA FASTENING SYSTEMS | C4293 |  |
| DLC4T12N | 5 - Replaced / Discontinued | 2 - Production Item | SPACELOK INC. | 16258 |  |
| BLC5T12N | 5 - Replaced / Discontinued | 2 - Production Item | SATAIR A/S | R1120 |  |
| BLC5T12N | 5 - Replaced / Discontinued | 2 - Production Item | AVIBANK MFG., INC. | 84256 |  |
| LM4CT12M | 5 - Replaced / Discontinued | 2 - Production Item | HARTWELL CORPORATION | 83014 |  |
| MS17988C412 | 5 - Replaced / Discontinued | 9 - No Longer Used | MILITARY STANDARDS | 96906 |  |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 53 | 5315 | 003497573 | A212A0 | 08323 | X | 1 | A | N | U | 30 Jan 1974 |
A212A0
Federal Item Identification Guide (FIIG_4065)
08323
Item Naming Code (INC_4080)
30 Jan 1974
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZG01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 2 | E | ZZ | MS17988C412 | 80205 | | ||||||
| 4 | 5 | 2 | 5 | KZ | D | LM4CT12M | 83014 | | ||||
| 4 | 5 | 2 | 5 | KZ | D | BLC5T12N | 84256 | | ||||
| 4 | 5 | 2 | 3 | ZG | A | MS17988C412 | C4293 | | ||||
| 4 | 5 | 2 | 6 | ZG | D | BLC5T12N | R1120 | | ||||
| 4 | 5 | 2 | 5 | KZ | D | DLC4T12N | 16258 | | ||||
| 3 | 5 | 9 | 4 | ZG | B | MS17988C412 | 96906 | | ||||
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
E
Document Availability Code (DAC_2640)
The reference number is represented by engineering data other than an engineering drawing. The data is available for unlimited use and will be furnished by the activity identified by the RNAAC upon request.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
4
Reference Number Format Code (RNFC_2920)
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
KZ
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
3
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the technical documentation upon request.
ZG
Reference Number Action Activity Code (RNAAC_2900)
Germany
A
Reference Number Status Code (RNSC_2923)
Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.
6
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
4
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| C | KZ | 0 | 16 Aug 1984 |
C
Item Standardization Code (ISC_2650)
An item authorized for procurement that has been included in an item reduction study but an intelligent decision could not be made due to lack of sufficient technical data.
KZ
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
16 Aug 1984
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZG | Q | 713 | Z | 9 | A | B | Z | Q | 095190 | J | 49790 | HARDWARE--NOI-SUB-9 |
ZG
Originating Activity Code (ORIG_ACTY_CD_4210)
Germany
Q
Less Than Carload (LCL_CD_2760)
70
713
Water Commodity Code (WRT_CMDTY_CD_9275)
Metal Hardware
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
B
Air Commodity Code (AIR_CMTY_HDLG_9215)
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
095190
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
J
NMFC Sub Item Number (SUB_ITM_NBR_0861)
49790
Uniform Freight Classification (UFC_CD_MODF_3040)
HARDWARE--NOI-SUB-9
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| APCM | Actuation Type | PULL AND PUSH |
| ABRM | Detent Quantity | 2 |
| CTXT | Detent To Tapered End Distance | 0.410 INCHES MAXIMUM |
| ANEE | Grip Length | 1.200 INCHES NOMINAL |
| CQFM | Hardness Rating | 36.0 ROCKWELL C MINIMUM SHANK AND 40.0 ROCKWELL C MAXIMUM SHANK |
| CQFM | Hardness Rating | 36.0 ROCKWELL C MINIMUM SPINDLE AND 40.0 ROCKWELL C MAXIMUM SPINDLE |
| AASN | Handle Length | 1.375 INCHES MINIMUM AND 1.750 INCHES MAXIMUM |
| AASL | Head Diameter | 0.360 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| MDCL | Material Document And Classification | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE DETENT |
| MDCL | Material Document And Classification | QQ-S-764 FED SPEC 1ST MATERIAL RESPONSE BUTTON OR QQ-S-763 FED SPEC 2ND MATERIAL RESPONSE BUTTON OR QQ-A-225/5,T4 FED SPEC 3RD MATERIAL RESPONSE BUTTON OR QQ-A-225/6,T4 FED SPEC 4TH MATERIAL RESPONSE BUTTON |
| MDCL | Material Document And Classification | QQ-S-764 FED SPEC 1ST MATERIAL RESPONSE HANDLE OR QQ-S-763 FED SPEC 2ND MATERIAL RESPONSE HANDLE |
| MDCL | Material Document And Classification | QQ-S-764 FED SPEC 1ST MATERIAL RESPONSE HEAD OR QQ-S-763 FED SPEC 2ND MATERIAL RESPONSE HEAD |
| MATT | Material | STEEL COMP 303 BUTTON OR STEEL COMP 302 BUTTON OR ALUMINUM ALLOY 2017 BUTTON OR ALUMINUM ALLOY 2024 BUTTON |
| MATT | Material | STEEL COMP 303 HANDLE OR STEEL COMP 302 HANDLE |
| MATT | Material | STEEL COMP 303 HEAD OR STEEL COMP 302 HEAD |
| MATT | Material | STEEL COMP 440C DETENT |
| MATT | Material | STEEL COMP 630 SHANK OR STEEL COMP 632 SHANK |
| MATT | Material | STEEL COMP 630 SPINDLE OR STEEL COMP 632 SPINDLE |
| MATT | Material | STEEL COMP 631 RING |
| MATT | Material | STEEL COMP 631 SPRING OR STEEL COMP 302 SPRING |
| MDCL | Material Document And Classification | AMS 5643 ASSN STD 1ST MATERIAL RESPONSE SHANK OR AMS 5657 ASSN STD 2ND MATERIAL RESPONSE SHANK |
| MDCL | Material Document And Classification | AMS 5643 ASSN STD 1ST MATERIAL RESPONSE SPINDLE OR AMS 5657 ASSN STD 2ND MATERIAL RESPONSE SPINDLE |
| MDCL | Material Document And Classification | AMS 5673 ASSN STD 1ST MATERIAL RESPONSE SPRING OR QQ-N-423,COND B FED SPEC 2ND MATERIAL RESPONSE SPRING |
| MDCL | Material Document And Classification | AMS 5673 ASSN STD SINGLE MATERIAL RESPONSE RING |
| AAZE | Shank Diameter | 0.247 INCHES MINIMUM AND 0.248 INCHES MAXIMUM |
| CQSX | Shear Strength | 9200 DOUBLE POUNDS PER SQUARE INCH |
| CRQD | Shoulder To Head End Distance | 1.030 INCHES MAXIMUM |
| CTDJ | Pin Attachment Type | LINK OR RING |
| STYL | Style Designator | T HANDLE |
| STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC 1ST TREATMENT RESPONSE BUTTON OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE BUTTON OR MIL-A-8625 MIL SPEC 3RD TREATMENT RESPONSE BUTTON |
| STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE DETENT |
| STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE HANDLE |
| STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE HEAD |
| STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE RING |
| STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SHANK |
| STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPINDLE |
| STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING |
| SFTT | Surface Treatment | PASSIVATE BUTTON OR OXIDE FILM BUTTON OR ANODIZE BUTTON |
| SFTT | Surface Treatment | PASSIVATE DETENT |
| SFTT | Surface Treatment | PASSIVATE HEAD |
| SFTT | Surface Treatment | PASSIVATE HANDLE |
| SFTT | Surface Treatment | PASSIVATE RING |
| SFTT | Surface Treatment | PASSIVATE SHANK |
| SFTT | Surface Treatment | PASSIVATE SPINDLE |
| SFTT | Surface Treatment | PASSIVATE SPRING |
Back to TopBack to Top
