- FSG 53 - Hardware and Abrasives
- FSC 5315 - Nails, Machine Keys, and Pins
- NSN 5315-00-937-0447
5315-00-937-0447
PIN,QUICK RELEASE
5315-00-937-0447 (5315009370447, 009370447)
Part Numbers (6 listings): MS17989-508 | DLS5L08N | BLS5L08NM | BLS5L08N | LH5SL0508 | LH5S-L-08M |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| MS17989-508 | 3 - Design Control Reference | 2 - Production Item | NATIONAL AEROSPACE STANDARDS | 80205 |  |
| MS17989-508 | 5 - Replaced / Discontinued | 2 - Production Item | ALCOA FASTENING SYSTEMS | C4293 |  |
| DLS5L08N | 5 - Replaced / Discontinued | 2 - Production Item | SPACELOK INC. | 16258 |  |
| BLS5L08NM | 5 - Replaced / Discontinued | 2 - Production Item | SATAIR A/S | R1120 |  |
| BLS5L08N | 5 - Replaced / Discontinued | 2 - Production Item | AVIBANK MFG., INC. | 84256 |  |
| BLS5L08NM | 5 - Replaced / Discontinued | 2 - Production Item | AVIBANK MFG., INC. | 84256 | |
| LH5SL0508 | 5 - Replaced / Discontinued | 2 - Production Item | SOUTHCO INC. | 62060 |  |
| LH5S-L-08M | 5 - Replaced / Discontinued | 2 - Production Item | SOUTHCO INC. | 62060 | |
| LH5S-L-08M | 5 - Replaced / Discontinued | 9 - No Longer Used | HARTWELL CORPORATION | 83014 |  |
| LH5SL0508 | 5 - Replaced / Discontinued | 9 - No Longer Used | HARTWELL CORPORATION | 83014 | |
| MS17989-508 | 5 - Replaced / Discontinued | 9 - No Longer Used | MILITARY STANDARDS | 96906 |  |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 53 | 5315 | 009370447 | A212A0 | 08323 | X | 1 | A | N | A | 0 | 28 Oct 1966 |
A212A0
Federal Item Identification Guide (FIIG_4065)
08323
Item Naming Code (INC_4080)
28 Oct 1966
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
0
ADPE Identification Code (ADPEC_0801)
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZG01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 2 | E | ZZ | MS17989-508 | 80205 | | ||||||
| 4 | 5 | 2 | 5 | KZ | D | DLS5L08N | 16258 | | ||||
| 4 | 5 | 2 | 5 | 9Z | D | LH5S-L-08M | 62060 | | ||||
| 4 | 5 | 2 | 5 | 9Z | D | LH5SL0508 | 62060 | | ||||
| 4 | 5 | 2 | 5 | KZ | D | BLS5L08N | 84256 | | ||||
| 4 | 5 | 2 | 5 | KZ | D | BLS5L08NM | 84256 | | ||||
| 4 | 5 | 2 | 3 | ZG | A | MS17989-508 | C4293 | | ||||
| 4 | 5 | 2 | 6 | ZG | D | BLS5L08NM | R1120 | | ||||
| 3 | 5 | 9 | 4 | KE | B | MS17989-508 | 96906 | | ||||
| 4 | 5 | 9 | 5 | 9Z | B | LH5S-L-08M | 83014 | | ||||
| 4 | 5 | 9 | 5 | 9Z | B | LH5SL0508 | 83014 | | ||||
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
E
Document Availability Code (DAC_2640)
The reference number is represented by engineering data other than an engineering drawing. The data is available for unlimited use and will be furnished by the activity identified by the RNAAC upon request.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
4
Reference Number Format Code (RNFC_2920)
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
KZ
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
9Z
Reference Number Action Activity Code (RNAAC_2900)
DLIS-K, Battle Creek, MI 49037-3084
3
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the technical documentation upon request.
ZG
Reference Number Action Activity Code (RNAAC_2900)
Germany
A
Reference Number Status Code (RNSC_2923)
Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.
6
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
4
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
KE
Reference Number Action Activity Code (RNAAC_2900)
Naval ICP, Philadelphia, PA 19111
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 3 | KZ | 1 | 1 | KZ | 0 | 9 May 1994 | 5315013685706 | 9 May 1994 |
3
Item Standardization Code (ISC_2650)
An item which, as a result of a formal item reduction study, is accepted as not authorized for procurement.
KZ
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
1
NIIN Status Code (NIIN_STAT_CD_2670)
Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. See volume 4, chapter 4.9.Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.
1
Replaced / Replacement Item Standardization Code (ISC_2650)
An item authorized for procurement as a result of a formal item reduction study and accepted as a replacement for one or more items not authorized for procurement. In addition, in generic relationships, a code 1 item is related to a code 2 item.
0
Replaced / Replacement NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
9 May 1994
Date of Replacement Standardization Decision (DT_STDZN_DEC_2300)
5315-01-368-5706
Replaced / Replacement NSN (RP_NSN_STD_RL_8977 / RPLM_NSN_STDZ_9525)
9 May 1994
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| KZ | Q | 713 | Z | 9 | A | B | Z | Q | 095190 | J | 49790 | HARDWARE--NOI-SUB-9 |
KZ
Originating Activity Code (ORIG_ACTY_CD_4210)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
Q
Less Than Carload (LCL_CD_2760)
70
713
Water Commodity Code (WRT_CMDTY_CD_9275)
Metal Hardware
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
B
Air Commodity Code (AIR_CMTY_HDLG_9215)
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
095190
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
J
NMFC Sub Item Number (SUB_ITM_NBR_0861)
49790
Uniform Freight Classification (UFC_CD_MODF_3040)
HARDWARE--NOI-SUB-9
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
S9I
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
DLA Troop Support, Philadelphia, PA 19111 ** No longer valid for input **
Y
Acquisition Advice Code (AAC_2507)
TERMINAL ITEM (NON-STOCKED ITEMS) Future procurement is not authorized. No wholesale stock is available for issue. 1. Requisitions will not be processed to the wholesale manager. 2. Internal Service/agency requisitioning may be continued in accordance with the Service/agency requisitioning policies.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
Q
Quantity Unit Pack (QUP_6106)
100
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AFLW | Actuation Method | PUSH BUTTON |
| APCM | Actuation Type | PULL AND PUSH |
| ABRM | Detent Quantity | 2 |
| CTXT | Detent To Tapered End Distance | 0.390 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| ANEE | Grip Length | 0.800 INCHES MINIMUM AND 0.820 INCHES MAXIMUM |
| CQFM | Hardness Rating | 36.0 ROCKWELL C MINIMUM SHANK AND 40.0 ROCKWELL C MAXIMUM SHANK |
| CQFM | Hardness Rating | 36.0 ROCKWELL C MINIMUM SPINDLE AND 40.0 ROCKWELL C MAXIMUM SPINDLE |
| AASL | Head Diameter | 0.390 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| MDCL | Material Document And Classification | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE HEAD OR QQ-S-637 FED SPEC 2ND MATERIAL RESPONSE HEAD |
| MDCL | Material Document And Classification | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE SHANK OR MIL-T-6736 MIL SPEC SINGLE MATERIAL RESPONSE SHANK |
| MDCL | Material Document And Classification | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE SPINDLE OR MIL-T-6736 MIL SPEC SINGLE MATERIAL RESPONSE SPINDLE |
| MDCL | Material Document And Classification | QQ-A-225/5 T4 FED SPEC 1ST MATERIAL RESPONSE BUTTON OR QQ-A-225/6 T4 FED SPEC 2ND MATERIAL RESPONSE BUTTON OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE BUTTON OR QQ-S-637 FED SPEC 4TH MATERIAL RESPONSE BUTTON |
| MDCL | Material Document And Classification | QQ-S-637 FED SPEC 1ST MATERIAL RESPONSE HANDLE OR QQ-W-423 FED SPEC 2ND MATERIAL RESPONSE HANDLE OR MIL-S-7720 MIL SPEC 2ND MATERIAL RESPONSE HANDLE OR MIL-S-7720 MIL SPEC 3RD MATERIAL RESPONSE HANDLE OR MIL-S-7720 MIL SPEC 4TH MATERIAL RESPONSE HANDLE OR MIL-S-7720 MIL SPEC 5TH MATERIAL RESPONSE HANDLE |
| MDCL | Material Document And Classification | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE DETENT |
| MDCL | Material Document And Classification | QQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE SPRING |
| MDCL | Material Document And Classification | QQ-W-423 FED SPEC 1ST MATERIAL RESPONSE HOOK OR QQ-S-766 FED SPEC 1ST MATERIAL RESPONSE HOOK OR QQ-S-698 COMP 1008 THRU 1020 FED SPEC 2ND MATERIAL RESPONSE HOOK OR QQ-W-428 TY 1,2,OR 3 COND A OR B FED SPEC 2ND MATERIAL RESPONSE HOOK |
| MATT | Material | ALUMINUM ALLOY 2017 BUTTON OR ALUMINUM ALLOY 2024 BUTTON OR STEEL COMP 4130 BUTTON OR STEEL BUTTON |
| MATT | Material | STEEL COMP 302 HOOK OR STEEL HOOK |
| MATT | Material | STEEL COMP 4130 HEAD OR STEEL HEAD |
| MATT | Material | STEEL COMP 4130 SHANK |
| MATT | Material | STEEL COMP 4130 SPINDLE |
| MATT | Material | STEEL COMP 440C DETENT |
| MATT | Material | STEEL SPRING |
| MATT | Material | STEEL HANDLE OR STEEL COMP 302 HANDLE OR STEEL COMP 303S HANDLE OR STEEL COMP 303SE HANDLE OR STEEL COMP 316 HANDLE |
| AAZE | Shank Diameter | 0.3095 INCHES MINIMUM AND 0.3110 INCHES MAXIMUM |
| CQSX | Shear Strength | 12800 DOUBLE POUNDS PER SQUARE INCH |
| CRQD | Shoulder To Head End Distance | 1.030 INCHES MAXIMUM |
| CTDJ | Pin Attachment Type | LINK OR RING |
| CSSB | Pin Center To Handle End Distance | 1.200 INCHES MINIMUM AND 1.300 INCHES MAXIMUM |
| STYL | Style Designator | L HANDLE |
| STDC | Surface Treatment Document And Classification | MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE BUTTON OR QQ-P-416 TY 2 CL 3 FED SPEC 2ND TREATMENT RESPONSE BUTTON OR MIL-C-5541 MIL SPEC 3RD TREATMENT RESPONSE BUTTON |
| STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE DETENT |
| STDC | Surface Treatment Document And Classification | QQ-P-416 TY 2 CL 3 FED SPEC 1ST TREATMENT RESPONSE HANDLE OR QQ-P-35 FED SPEC 2ND TREATMENT RESPONSE HANDLE |
| STDC | Surface Treatment Document And Classification | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE HEAD |
| STDC | Surface Treatment Document And Classification | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE SPINDLE |
| STDC | Surface Treatment Document And Classification | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE SPRING |
| STDC | Surface Treatment Document And Classification | QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE SHANK |
| SFTT | Surface Treatment | ANODIZE BUTTON OR CADMIUM BUTTON OR OXIDE FILM BUTTON |
| SFTT | Surface Treatment | CADMIUM HANDLE OR PASSIVATE HANDLE |
| SFTT | Surface Treatment | CADMIUM HEAD |
| SFTT | Surface Treatment | PASSIVATE DETENT |
| SFTT | Surface Treatment | CADMIUM SHANK |
| SFTT | Surface Treatment | CADMIUM SPINDLE |
| SFTT | Surface Treatment | CADMIUM SPRING |
Back to TopBack to Top
