- FSG 53 - Hardware and Abrasives
- FSC 5315 - Nails, Machine Keys, and Pins
- NSN 5315-00-969-4332
5315-00-969-4332
PIN,QUICK RELEASE
5315-00-969-4332 (5315009694332, 009694332)
Part Numbers (5 listings): MS17987C417 | BLS4R17S | BLC4R17SM | LG4CR17M | SLC4R17 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| MS17987C417 | 2 - Definitive Specification or Standard Document | 2 - Production Item | MILITARY STANDARDS | 96906 |  |
| BLS4R17S | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | AVIBANK MFG., INC. | 84256 |  |
| BLC4R17SM | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | AVIBANK MFG., INC. | 84256 | |
| LG4CR17M | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | HARTWELL CORPORATION | 83014 |  |
| SLC4R17 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | SPACELOK INC. | 16258 |  |
| BLS4R17S | 5 - Replaced / Discontinued | 2 - Production Item | SATAIR A/S | R1120 |  |
| BLC4R17SM | 5 - Replaced / Discontinued | 2 - Production Item | SATAIR A/S | R1120 | |
| MS17987C417 | 5 - Replaced / Discontinued | 2 - Production Item | ALCOA FASTENING SYSTEMS | C4293 |  |
2 - Definitive Specification or Standard Document
Reference Number Category Code (DRN_2910)
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
1 - Incomplete Part Number
Reference Number Variation Code (DRN_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 53 | 5315 | 009694332 | A212A0 | 08323 | X | 1 | A | N | U | 15 Jun 1966 |
A212A0
Federal Item Identification Guide (FIIG_4065)
08323
Item Naming Code (INC_4080)
15 Jun 1966
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZA01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZG01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZC01 | 1 Feb 1997 | |||||||||||||||||||||||||||||
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4 | 5 | 1 | 5 | KZ | D | SLC4R17 | 16258 | | ||||
| 4 | 5 | 1 | 5 | KZ | D | LG4CR17M | 83014 | | ||||
| 4 | 5 | 1 | 5 | KZ | D | BLC4R17SM | 84256 | | ||||
| 4 | 5 | 1 | 5 | KZ | D | BLS4R17S | 84256 | | ||||
| 4 | 5 | 2 | 3 | ZG | A | MS17987C417 | C4293 | | ||||
| 4 | 5 | 2 | 6 | ZG | D | BLC4R17SM | R1120 | | ||||
| 4 | 5 | 2 | 6 | ZG | D | BLS4R17S | R1120 | | ||||
4
Reference Number Format Code (RNFC_2920)
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
1
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
KZ
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
3
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the technical documentation upon request.
ZG
Reference Number Action Activity Code (RNAAC_2900)
Germany
A
Reference Number Status Code (RNSC_2923)
Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.
6
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 3 | KZ | 1 | 1 | KZ | 0 | 8 May 1985 | 5315002442900 | 2 May 1985 |
3
Item Standardization Code (ISC_2650)
An item which, as a result of a formal item reduction study, is accepted as not authorized for procurement.
KZ
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
1
NIIN Status Code (NIIN_STAT_CD_2670)
Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. See volume 4, chapter 4.9.Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.
1
Replaced / Replacement Item Standardization Code (ISC_2650)
An item authorized for procurement as a result of a formal item reduction study and accepted as a replacement for one or more items not authorized for procurement. In addition, in generic relationships, a code 1 item is related to a code 2 item.
0
Replaced / Replacement NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
8 May 1985
Date of Replacement Standardization Decision (DT_STDZN_DEC_2300)
5315-00-244-2900
Replaced / Replacement NSN (RP_NSN_STD_RL_8977 / RPLM_NSN_STDZ_9525)
2 May 1985
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| KZ | Q | 713 | Z | 9 | A | B | Z | Q | 095190 | J | 49790 | HARDWARE--NOI-SUB-9 |
KZ
Originating Activity Code (ORIG_ACTY_CD_4210)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
Q
Less Than Carload (LCL_CD_2760)
70
713
Water Commodity Code (WRT_CMDTY_CD_9275)
Metal Hardware
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
B
Air Commodity Code (AIR_CMTY_HDLG_9215)
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
095190
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
J
NMFC Sub Item Number (SUB_ITM_NBR_0861)
49790
Uniform Freight Classification (UFC_CD_MODF_3040)
HARDWARE--NOI-SUB-9
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AFLW | Actuation Method | PUSH BUTTON |
| APCM | Actuation Type | PUSH |
| ABRM | Detent Quantity | 2 |
| CTXT | Detent To Tapered End Distance | 0.260 INCHES MINIMUM AND 0.290 INCHES MAXIMUM |
| ANEE | Grip Length | 1.700 INCHES MINIMUM AND 1.720 INCHES MAXIMUM |
| CQFM | Hardness Rating | 40.0 ROCKWELL C MINIMUM OVERALL |
| AASL | Head Diameter | 0.310 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| MDCL | Material Document And Classification | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE DETENT |
| MDCL | Material Document And Classification | QQ-S-764 FED SPEC 1ST MATERIAL RESPONSE BUTTON OR MIL-W-52263 MIL SPEC 1ST MATERIAL RESPONSE BUTTON OR QQ-A-225/6 FED SPEC 2ND MATERIAL RESPONSE BUTTON OR QQ-A-225/5 MIL SPEC 3RD MATERIAL RESPONSE BUTTON |
| MDCL | Material Document And Classification | QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE COLLAR OR MIL-W-52263 MIL SPEC SINGLE MATERIAL RESPONSE COLLAR |
| MDCL | Material Document And Classification | QQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE HANDLE OR MIL-W-52263 MIL SPEC SINGLE MATERIAL RESPONSE HANDLE |
| MDCL | Material Document And Classification | QQ-W-423 FED SPEC SINGLE MATERIAL RESPONSE RING |
| MATT | Material | STEEL COMP 302 RING |
| MATT | Material | STEEL COMP 303 BUTTON OR ALUMINUM ALLOY 2024 BUTTON OR ALUMINUM ALLOY 2017 BUTTON |
| MATT | Material | STEEL COMP 303 COLLAR |
| MATT | Material | STEEL COMP 303 HANDLE |
| MATT | Material | STEEL COMP 440C DETENT |
| MATT | Material | STEEL COMP 630 SHANK OR STEEL COMP 632 SHANK |
| MATT | Material | STEEL COMP 630 SPINDLE OR STEEL COMP 632 SPINDLE |
| MATT | Material | STEEL COMP 631 SPRING OR STEEL COMP 302 SPRING |
| MDCL | Material Document And Classification | AMS 5643 ASSN STD 1ST MATERIAL RESPONSE SHANK OR AMS 5657 ASSN STD 2ND MATERIAL RESPONSE SHANK |
| MDCL | Material Document And Classification | AMS 5643 ASSN STD 1ST MATERIAL RESPONSE SPINDLE OR GAMS 5657 ASSN STD 2ND MATERIAL RESPONSE SPINDLE |
| MDCL | Material Document And Classification | AMS 5673 ASSN STD 1ST MATERIAL RESPONSE SPRING OR QQ-W-423 COND B FED SPEC 2ND MATERIAL RESPONSE SPRING |
| ABQC | Ring Handle Diameter | 1.060 INCHES MINIMUM |
| AAZE | Shank Diameter | 0.2470 INCHES MINIMUM AND 0.2485 INCHES MAXIMUM |
| CQSX | Shear Strength | 9200 DOUBLE POUNDS PER SQUARE INCH |
| CRQD | Shoulder To Head End Distance | 0.780 INCHES MINIMUM |
| CTDJ | Pin Attachment Type | HOOK OR RING |
| FEAT | Special Features | CRES ATTACHING HOOK OR RING QQ-W-423 COMP 302,PASSIVATED QQ-P-35 |
| STYL | Style Designator | RING HANDLE |
| STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC 1ST TREATMENT RESPONSE BUTTON OR MIL-A-8625 MIL SPEC 2ND TREATMENT RESPONSE BUTTON |
| STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE COLLAR |
| STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE DETENT |
| STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE HANDLE |
| STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE RING |
| STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SHANK |
| STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPINDLE |
| STDC | Surface Treatment Document And Classification | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING |
| SFTT | Surface Treatment | PASSIVATE BUTTON OR ANODIZE BUTTON |
| SFTT | Surface Treatment | PASSIVATE DETENT |
| SFTT | Surface Treatment | PASSIVATE COLLAR |
| SFTT | Surface Treatment | PASSIVATE HANDLE |
| SFTT | Surface Treatment | PASSIVATE RING |
| SFTT | Surface Treatment | PASSIVATE SHANK |
| SFTT | Surface Treatment | PASSIVATE SPINDLE |
| SFTT | Surface Treatment | PASSIVATE SPRING |
Back to TopBack to Top
