5315-01-232-7043

PIN,QUICK RELEASE

5315-01-232-7043 (5315012327043, 012327043)
Part Numbers (3 listings): BLC5T9S | BLC5TA9S | 91373910 |
Summary

FSG 53 / FSC 5315

DEMIL: A

DEMIL INT: 1

HMIC: N

Date Created: 19 May 1986

MSDS: None

Hazmat: None

Request a Quote


;


MASTER CROSS REFERENCE LIST (MCRL) | NSN 5315-01-232-7043 Submit RFQ
Manufacturer Part NumberRNCCRNVCManufacturer NameCAGE
BLC5T9S3 - Design Control Reference2 - Production ItemAVIBANK MFG., INC.  84256    CAGE 84256  
BLC5TA9S5 - Replaced / Discontinued2 - Production ItemB E AEROSPACE CONSUMABLESMANAGEMENT  F7652    CAGE F7652  
913739105 - Replaced / Discontinued2 - Production ItemTHALES  F6481    CAGE F6481  
Code Definitions

3 - Design Control Reference

Reference Number Category Code (DRN_2910)


Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.

5 - Replaced / Discontinued

Reference Number Category Code (DRN_2910)


Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.

2 - Production Item

Reference Number Variation Code (DRN_4780)


A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.


FLIS - SEG A - IDENTIFICATION | NSN 5315-01-232-7043 Submit RFQ
FSGFSCNIINFIIGINCCRITICALITYTYPE OF ITEMMRCDEMILHMICEDCPMICADPECDATE CREATED
535315012327043A212A008323X1ANU19 May 1986
Code Definitions

53

Federal Supply Group (FSG_3994/FSC_WI_FSG_3996)


Hardware and Abrasives

5315

Federal Supply Class (FSC_3994/FSC_WI_FSC_3996)


Nails, Machine Keys, and Pins

012327043

National Item Identification Number (NCB_CD_4130/I_I_NBR_4131)


NSN 5315-01-232-7043

A212A0

Federal Item Identification Guide (FIIG_4065)

08323

Item Naming Code (INC_4080)

19 May 1986

NIIN Assignment Date (DT_NIIN_ASGMT_2180)

X

Item Criticality (CRITL_CD_FIIG_3843)


The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

1

Type of Item Identification (TYP_II_4820)


Full Descriptive Item Identification

A

Demilitarization Code (DEMIL_CD_0167)


Non-MLI/ Non-SLI — Demilitarization not required.

N

Hazardous Material Indicator Code (HMIC_0865)


Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.

U

Precious Metals Indicator Code (PMIC_0802)


Precious Metal Content is unknown.


Similar & Related NSN Parts

FLIS - SEG B - MOE RULE DATA | NSN 5315-01-232-7043 Submit RFQ
MOE RuleFormer MOEAMCAMSCNIMSCIMCIMC ActivityAACDSORCollaboratorsReceiversEffective Date
ZF011 Apr 1991
Code Definitions

FLIS - SEG C - REFERENCE NUMBER | NSN 5315-01-232-7043 Submit RFQ
RNFCRNCCRNVCDACRNAACRNSCRNJCSADCMSDSHCCReference NumberCAGE
3249ZDBLC5T9S  84256   CAGE/84256
4524ZFB91373910  F6481   CAGE/F6481
4524ZFABLC5TA9S  F7652   CAGE/F7652
Code Definitions

3

Reference Number Category Code (RNCC_2910)


Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.

2

Reference Number Variation Code (RNVC_4780)


A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.

4

Document Availability Code (DAC_2640)


The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.

9Z

Reference Number Action Activity Code (RNAAC_2900)


DLIS-K, Battle Creek, MI 49037-3084

D

Reference Number Status Code (RNSC_2923)


Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.

4

Reference Number Format Code (RNFC_2920)


Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.

5

Reference Number Category Code (RNCC_2910)


Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.

ZF

Reference Number Action Activity Code (RNAAC_2900)


France

B

Reference Number Status Code (RNSC_2923)


Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.

A

Reference Number Status Code (RNSC_2923)


Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.


FLIS - SEG E - ITEM STANDARDIZATION DATA | NSN 5315-01-232-7043 Submit RFQ
ISCOriginatorNIIN StatusReplaced / Replacement ISCReplaced / Replacement OriginatorReplacement NIIN StatusReplacement DateReplaced / Replacement NSNDecision Date
597019 May 1986
Code Definitions

5

Item Standardization Code (ISC_2650)


An item authorized for procurement that has not yet been subject to item standardization.

97

Originator of Standardization Decision (ORG_STDZN_DEC_9325)


DLIS-LFF, Battle Creek, MI 49037-3084

0

NIIN Status Code (NIIN_STAT_CD_2670)


Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.

19 May 1986

Standardization Decision Date (DT_STDZN_DEC_2300)


FLIS - SEG G - FREIGHT DATA | NSN 5315-01-232-7043 Submit RFQ
IntegrityOriginatingHMCLCLWCCTCCSHCADCACCASHLTLNMFCNMFC Sub ItemUFCFreight DescriptionRail Variance
ZF
Code Definitions

ZF

Originating Activity Code (ORIG_ACTY_CD_4210)


France

Rail Variance

Rail Variance (RAIL_VARI_CD_4760)


No Variation. NMFC and UFCC Match.


FLIS - SEG M/V - CHARACTERISTICS DATA | NSN 5315-01-232-7043 Submit RFQ
MRCDecoded RequirementClear Text Reply
AFLWActuation MethodPUSH BUTTON
APCMActuation TypePUSH
ABRMDetent Quantity2
CTXTDetent To Tapered End Distance0.335 INCHES MINIMUM AND 0.365 INCHES MAXIMUM
ANEEGrip Length0.900 INCHES MINIMUM AND 0.920 INCHES MAXIMUM
AASNHandle Length2.065 INCHES MAXIMUM
CQFMHardness Rating58.0 ROCKWELL C MINIMUM AND 62.0 ROCKWELL C MAXIMUM DETENT
MDCLMaterial Document And ClassificationQQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE HANDLE
MDCLMaterial Document And ClassificationQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE DETENT
MATTMaterialALUMINUM ALLOY HANDLE
MATTMaterialSTEEL COMP 303 COLLAR
MATTMaterialSTEEL COMP 440C DETENT
MATTMaterialSTEEL COMP 630 OR STEEL COMP 632 SHANK
MATTMaterialSTEEL COMP 630 OR STEEL COMP 632 SPINDLE
MATTMaterialSTEEL COMP 631 OR STEEL COMP 302 SPRING
MDCLMaterial Document And ClassificationAMS5673 ASSN STD 1ST MATERIAL RESPONSE OR QQ-W-423,COND B FED SPEC 2ND MATERIAL RESPONSE SPRING
MDCLMaterial Document And ClassificationAMS5643 ASSN STD 1ST MATERIAL RESPONSE OR AMS5657 ASSN STD 2ND MATERIAL RESPONSE SHANK
MDCLMaterial Document And ClassificationAMS5643 ASSN STD 1ST MATERIAL RESPONSE OR AMS5657 ASSN STD 2ND MATERIAL RESPONSE SPINDLE
MDCLMaterial Document And ClassificationASTM-A-484/582 ASSN STD SINGLE MATERIAL RESPONSE COLLAR
AAZEShank Diameter0.3720 INCHES MINIMUM AND 0.3735 INCHES MAXIMUM
CQSXShear Strength14400 DOUBLE POUNDS PER SQUARE INCH
CRQDShoulder To Head End Distance1.450 INCHES MAXIMUM
CTDJPin Attachment TypeLINK
STYLStyle DesignatorT HANDLE
STDCSurface Treatment Document And ClassificationMIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE AND QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE COLLAR
STDCSurface Treatment Document And ClassificationMIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE AND QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE DETENT
STDCSurface Treatment Document And ClassificationMIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE AND QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SHANK
STDCSurface Treatment Document And ClassificationMIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE AND QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPINDLE
STDCSurface Treatment Document And ClassificationMIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE AND QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING
STDCSurface Treatment Document And ClassificationQQ-A-591 FED SPEC SINGLE TREATMENT RESPONSE HANDLE
SFTTSurface TreatmentANODIZE HANDLE
SFTTSurface TreatmentPASSIVATE DETENT
SFTTSurface TreatmentPASSIVATE COLLAR
SFTTSurface TreatmentPASSIVATE SHANK
SFTTSurface TreatmentPASSIVATE SPINDLE
SFTTSurface TreatmentPASSIVATE SPRING

Questions?


Want to know more about our Defense Services?


Contact Us. We are here to help.


Questions?


Have any questions regarding a Request For Quote?


Contact Us. We are here to help.


Questions?


Ask about our Supply Management Services.


Contact Us. We are here to help.


Back to Top
Back to Top