- FSG 53 - Hardware and Abrasives
- FSC 5315 - Nails, Machine Keys, and Pins
- NSN 5315-01-406-7425
5315-01-406-7425
PIN,EXPANDING GRIP
5315-01-406-7425 (5315014067425, 014067425)
Part Numbers (3 listings): ADP227K8C24TL6 | EGP8C24TL6 | C1866K8C24TL6 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| ADP227K8C24TL6 | 3 - Design Control Reference | 2 - Production Item | AVIBANK MFG., INC. | 84256 |  |
| EGP8C24TL6 | 5 - Replaced / Discontinued | 2 - Production Item | MONOGRAM AEROSPACE FASTENERS, INC. | 98524 |  |
| C1866K8C24TL6 | 7 - Vendor Item Drawing Reference | 2 - Production Item | LOCKHEED MARTIN CORPORATION | 81755 |  |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
7 - Vendor Item Drawing Reference
Reference Number Category Code (DRN_2910)
Vendor Item Drawing Reference (formerly Specification Control Reference). The number assigned by a design activity to a drawing that is not item-identifying, but which delineates existing commercial or vendor-developed items meeting all engineering and test requirements specified, without imposing additional test/engineering requirements not normally provided by the vendor(s). Includes only those drawings which meet the definition for Vendor Item Drawing in MIL-STD 100. Vendor Item Drawing References are administrative control numbers and shall not be used as part identification numbers.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 53 | 5315 | 014067425 | A212A0 | 35796 | X | 1 | A | N | A | 0 | 11 Jan 1995 |
A212A0
Federal Item Identification Guide (FIIG_4065)
35796
Item Naming Code (INC_4080)
11 Jan 1995
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
0
ADPE Identification Code (ADPEC_0801)
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DGX1 | 1 | H | 1 Jan 2014 | |||||||||||||||||||||||||||
1
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
H
Acquisition Method Suffix Code (AMSC_2876)
The Government physically does not have in its possession sufficient, accurate, or legible data to purchase this part from other than current source(s). (NOTE: This code is applicable only to parts under immediate buy requirements and only as long as the deficiency is under review for resolution and appropriate recoding.) Valid AMCs: 1, 2, 3, 4 and 5.
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 2 | 5 | ZZ | ADP227K8C24TL6 | 84256 | | ||||||
| 5 | 2 | 5 | ZZ | EGP8C24TL6 | 98524 | | ||||||
| 7 | 2 | A | ZZ | C1866K8C24TL6 | 81755 | | ||||||
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
7
Reference Number Category Code (RNCC_2910)
Vendor Item Drawing Reference (formerly Specification Control Reference). The number assigned by a design activity to a drawing that is not item-identifying, but which delineates existing commercial or vendor-developed items meeting all engineering and test requirements specified, without imposing additional test/engineering requirements not normally provided by the vendor(s). Includes only those drawings which meet the definition for Vendor Item Drawing in MIL-STD 100. Vendor Item Drawing References are administrative control numbers and shall not be used as part identification numbers.
A
Document Availability Code (DAC_2640)
The reference number is represented by an engineering drawing and the drawing is available for unlimited use. The drawing will be furnished by the activity identified by the RNAAC upon request.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 5 | 97 | 0 | 11 Jan 1995 |
5
Item Standardization Code (ISC_2650)
An item authorized for procurement that has not yet been subject to item standardization.
97
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
DLIS-LFF, Battle Creek, MI 49037-3084
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
11 Jan 1995
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| KH | 713 | Z | 9 | A | B | Z | W | 095190 | Z | 49790 | HARDWARE--NOI |
KH
Originating Activity Code (ORIG_ACTY_CD_4210)
Defense Industrial Supply Center, Philadelphia, PA 19111
713
Water Commodity Code (WRT_CMDTY_CD_9275)
Metal Hardware
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
B
Air Commodity Code (AIR_CMTY_HDLG_9215)
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
W
Less Than Truckload (CLAS_RTNG_CD_2770)
Variable Rating
095190
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
Z
NMFC Sub Item Number (SUB_ITM_NBR_0861)
49790
Uniform Freight Classification (UFC_CD_MODF_3040)
HARDWARE--NOI
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
J
Acquisition Advice Code (AAC_2507)
NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
0
Quantity Unit Pack (QUP_6106)
No QUP
N
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 10 | 1 | AAA |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | X | A1 | D3 | 00 | E | Q | O |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
10
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Physical protection
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
AAA
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
Unit Pack Weight (UP_WT_5153)
Unit Pack Cube (UP_CU_5155)
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
X
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
As required to protect the item or elements of the package
A1
Unit Container Code (UNIT_CTNR_CD_5166)
Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal.
D3
Intermediate Container Code (INTMD_CTNR_CD_5167)
PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
E
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
O
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AFLW | Actuation Method | HANDLE |
| CBBL | Features Provided | LOCKING CAM HANDLE |
| AATQ | Grip Length | 1.500 INCHES NOMINAL |
| MDCL | Material Document And Classification | QQ-A-200/8 FED SPEC SINGLE MATERIAL RESPONSE CAM HANDLE OR QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE CAM HANDLE OR QQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE CAM HANDLE |
| MDCL | Material Document And Classification | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE INNER PIN OR AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE INNER PIN |
| MATT | Material | ALUMINUM ALLOY 6061 CAM HANDLE OR ALUMINUM ALLOY 380.0 CAM HANDLE |
| MATT | Material | STEEL CORROSION RESISTING BARREL NUT AND THRUST WASHER OR STEEL COMP 630 BARREL NUT AND THRUST WASHER |
| MATT | Material | STEEL COMP 630 FEMALE BUSHING SEGMENTS |
| MATT | Material | STEEL CORROSION RESISTING INNER PIN OR STEEL COMP 630 INNER PIN |
| MATT | Material | STEEL CORROSION RESISTING MALE BUSHING SEGMENTS OR STEEL COMP 630 MALE BUSHING SEGMENTS |
| ACHS | Lanyard Length | 5.750 INCHES MINIMUM AND 6.250 INCHES MAXIMUM |
| MDCL | Material Document And Classification | AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE FEMALE BUSHING SEGMENTS |
| MDCL | Material Document And Classification | ASTM A581 ASSN STD SINGLE MATERIAL RESPONSE BARREL NUT AND THRUST WASHER OR ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE BARREL NUT AND THRUST WASHER OR MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE BARREL NUT AND THRUST WASHER OR QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE BARREL NUT AND THRUST WASHER OR AMS 5639 ASSN STD SINGLE MATERIAL RESPONSE BARREL NUT AND THRUST WASHER OR AMS 5640 ASSN STD SINGLE MATERIAL RESPONSE BARREL NUT AND THRUST WASHER OR AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE BARREL NUT AND THRUST WASHER |
| MDCL | Material Document And Classification | ASTM A581 ASSN STD SINGLE MATERIAL RESPONSE MALE BUSHING SEGMENTS OR ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE MALE BUSHING SEGMENTS OR AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE MALE BUSHING SEGMENTS |
| CTXN | Pin Nominal Diameter | 0.500 INCHES |
| CQSX | Shear Strength | 14700 DOUBLE POUNDS PER SQUARE INCH |
| CTXP | Shoulder To Head End Distance | 1.375 INCHES MAXIMUM |
| ABHC | Overall Width | 1.030 INCHES MAXIMUM |
| CTDJ | Pin Attachment Type | CABLE LANYARD W/O TERMINATIONS |
| ZZZK | Specification/Standard Data | 81755-C1866 MANUFACTURERS SPECIFICATION CONTROL |
| STYL | Style Designator | CLOSED POSITION |
| STDC | Surface Treatment Document And Classification | MIL-A-8625, TYPE II, CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE CAM HANDLE OR MIL-A-8625, TYPE III, CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE CAM HANDLE |
| STDC | Surface Treatment Document And Classification | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE BARREL NUT AND THRUST WASHER |
| STDC | Surface Treatment Document And Classification | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE FEMALE BUSHING SEGMENTS |
| STDC | Surface Treatment Document And Classification | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE MALE BUSHING SEGMENTS |
| STDC | Surface Treatment Document And Classification | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE INNER PIN |
| SFTT | Surface Treatment | ANODIZE CAM HANDLE |
| SFTT | Surface Treatment | PASSIVATE BARREL NUT AND THRUST WASHER |
| SFTT | Surface Treatment | PASSIVATE FEMALE BUSHING SEGMENTS |
| SFTT | Surface Treatment | PASSIVATE INNER PIN |
| SFTT | Surface Treatment | PASSIVATE MALE BUSHING SEGMENTS |
Back to TopBack to Top
