Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
HL10V-6-2 | 3 - Design Control Reference | 2 - Production Item | HI-SHEAR CORPORATION | 73197 | |
HL10V6-2 | 3 - Design Control Reference | 2 - Production Item | HI-SHEAR CORPORATION | 73197 | |
HL10V6-2 | 5 - Replaced / Discontinued | 2 - Production Item | SPS TECHNOLOGIES LTD TJ BROOKS | K5673 | |
HL10V6-2 | 5 - Replaced / Discontinued | 2 - Production Item | HUCK INTERNATIONAL, INC. | 17446 | |
AIC-L-10V-6-2 | 5 - Replaced / Discontinued | 2 - Production Item | SPS TECHNOLOGIES LLC | 06725 | |
HL10V6-2 | 5 - Replaced / Discontinued | 2 - Production Item | ALCOA GLOBAL FASTENERS, INC. | 92215 | |
GB511K3-2 | 5 - Replaced / Discontinued | 2 - Production Item | NORTHROP GRUMMAN SYSTEMS CORPORATION | 26512 | |
HL10V6-2 | 5 - Replaced / Discontinued | 2 - Production Item | SPS TECHNOLOGIES, LLC | 27624 | |
HL10V6-2 | 5 - Replaced / Discontinued | 2 - Production Item | SPS TECHNOLOGIES, LLC | 56878 | |
HL10V602 | 5 - Replaced / Discontinued | 2 - Production Item | SPS TECHNOLOGIES, LLC | 56878 | |
HL10V6-2 | 5 - Replaced / Discontinued | 9 - No Longer Used | HUCK INTL INC | 97928 | |
HL10V6-2 | 5 - Replaced / Discontinued | 9 - No Longer Used | SPS TECHNOLOGIES INC | 50392 | |
CR10V-6-2 | 5 - Replaced / Discontinued | 9 - No Longer Used | SPS TECHNOLOGIES, LLC | 11815 | |
HL10V602 | 5 - Replaced / Discontinued | 9 - No Longer Used | SPS TECHNOLOGIES, LLC | 80539 | |
ST3M416V3-2 | 5 - Replaced / Discontinued | 9 - No Longer Used | BOEING COMPANY, THE | 76301 | |
10123438 | 6 - Informative Reference | 9 - No Longer Used | PAEAEESIKUNTA | A486G |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
Informative Reference. North Atlantic Treaty Organization (NATO) Stock Numbers (CAGE Code 99995), Production Equipment Codes (CAGE 99998), and DoD Ammunition Codes (CAGE Code 99999) which may be related to NSNs. (Reference numbers for the CAGE Codes cited above shall be coded RNVC 9.)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
53 | 5320 | 000840699 | A528U0 | 67165 | X | K | A | N | A | 0 | 22 Nov 1972 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive - Reference Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Item does not contain Precious Metal.
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
YJ01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZC01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZK01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZR01 | 1 Jul 1997 | |||||||||||||||||||||||||||||
YW01 | 1 Aug 1997 | |||||||||||||||||||||||||||||
ZF01 | 1 Apr 2000 | |||||||||||||||||||||||||||||
ZE01 | 1 Nov 2005 | |||||||||||||||||||||||||||||
WF01 | 1 Aug 2009 | |||||||||||||||||||||||||||||
FGGI | 1 | C | Z | SX | 1 Jan 2016 |
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
Oklahoma City Air Logistics Center, Tinker AFB, OK 73145-3043
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 2 | 1 | KZ | HL10V-6-2 | 73197 | |||||||
3 | 2 | 5 | ZZ | HL10V6-2 | 73197 | |||||||
5 | 2 | 1 | KE | HL10V6-2 | K5673 | |||||||
3 | 5 | 2 | 5 | KE | D | HL10V6-2 | 92215 | |||||
5 | 2 | 5 | ZZ | HL10V6-2 | 17446 | |||||||
3 | 5 | 2 | 5 | KE | D | GB511K3-2 | 26512 | |||||
4 | 5 | 2 | 5 | KZ | D | HL10V6-2 | 27624 | |||||
4 | 5 | 2 | 1 | KZ | D | AIC-L-10V-6-2 | 06725 | |||||
5 | 2 | 5 | KE | HL10V6-2 | 56878 | |||||||
5 | 2 | 5 | KZ | HL10V602 | 56878 | |||||||
5 | 9 | 5 | KZ | B | CR10V-6-2 | 11815 | ||||||
3 | 5 | 9 | 5 | KE | B | HL10V6-2 | 50392 | |||||
5 | 9 | 5 | KZ | HL10V6-2 | 97928 | |||||||
4 | 5 | 9 | 1 | KZ | B | ST3M416V3-2 | 76301 | |||||
4 | 5 | 9 | 5 | KZ | B | HL10V602 | 80539 | |||||
4 | 6 | 9 | 9 | WF | B | 10123438 | A486G |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
Defense Supply Center Philadelphia, Philadelphia, PA 19101
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
USA
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
Naval ICP, Philadelphia, PA 19111
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
Informative Reference. North Atlantic Treaty Organization (NATO) Stock Numbers (CAGE Code 99995), Production Equipment Codes (CAGE 99998), and DoD Ammunition Codes (CAGE Code 99999) which may be related to NSNs. (Reference numbers for the CAGE Codes cited above shall be coded RNVC 9.)
The reference number is of the type for which an indication of document availability is not required.
Finland
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
2 | KZ | 1 | 14 Dec 2011 |
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
Defense Supply Center Philadelphia, Philadelphia, PA 19101
Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. See volume 4, chapter 4.9.Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
KZ | 713 | Z | 9 | A | B | Z | W | 136500 | Z | 68455 | METAL-NOI-METAL-ALLOYS-NOI |
Defense Supply Center Philadelphia, Philadelphia, PA 19101
Metal Hardware
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
No special handling required.
Variable Rating
No Variation. NMFC and UFCC Match.
DLA Troop Support, Philadelphia, PA 19111 ** No longer valid for input **
TERMINAL ITEM. Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
Unclassified
100
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
Defense Logistics Agency, Enterprise Business Systems
DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED. Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.
1
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
Department of the Navy
Department of the Air Force
Defense Logistics Agency
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AASB | Fastener Length | 0.440 INCHES MINIMUM AND 0.460 INCHES MAXIMUM |
ANEE | Grip Length | 0.130 INCHES MAXIMUM |
AASU | Head Height | 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM |
AASK | Head Style | ERR-090 |
AAZG | Head Major Diameter | 0.295 INCHES MINIMUM AND 0.315 INCHES MAXIMUM |
MATT | Material | TITANIUM ALLOY UNS R56400 OVERALL |
CQJX | Nominal Thread Size | 0.190 INCHES |
ABAJ | Lubrication | CETYL ALCOHOL |
MDCL | Material Document And Classification | AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
AAZE | Shank Diameter | 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
AAZF | Shank Style | PIN-RIVET, STRAIGHT, THREADED |
CQSX | Shear Strength | 95000 SINGLE POUNDS PER SQUARE INCH |
AATB | Width Between Flats | 0.079 INCHES MINIMUM AND 0.081 INCHES MAXIMUM |
AAJD | Thread Class | 3A |
AAJF | Thread Direction | RIGHT-HAND |
CMLP | Thread Quantity Per Inch | 32 |
THSD | Thread Series Designator | UNJF |