Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
M24243/1-D403 | 2 - Definitive Specification or Standard Document | 2 - Production Item | MILITARY SPECIFICATIONS | 81349 | ![]() |
MIL-R-24243 | 4 - Non-Definitive Specification or Standard Document | 1 - Incomplete Part Number | MILITARY SPECIFICATIONS | 81349 | ![]() |
SB4-3 | 5 - Replaced / Discontinued | 9 - No Longer Used | MARSON CORP | 10054 | ![]() |
MS24243-1D403 | C - Advisory Reference | 1 - Incomplete Part Number | BOSCH REXROTH GMBH LOHMANN | D9182 | ![]() |
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
Non-Definitive U.S. Government Specification or Standard Reference. Any Government specification or standard reference other than those indicated in code 2 as definitive references. This code shall be used for non-definitive Government specifications and standard references and non-definitive part numbers, type designators, and style numbers included therein which are coded with RNVC 1.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
53 | 5320 | 003956523 | A040A0 | 00864 | X | 1 | A | N | A | 0 | 12 Apr 1974 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
Item does not contain Precious Metal.
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
G880 | 0 | 0 | C | 1 Apr 1991 | ||||||||||||||||||||||||||
G900 | 0 | 0 | L | 1 Apr 1991 | ||||||||||||||||||||||||||
MC47 | MC10 | 1 | G | Z | PA | 1 Jun 2005 | ||||||||||||||||||||||||
N9BZ | N9ZD | 1 | G | Z | HD | GT | HD | 1 Jun 2005 | ||||||||||||||||||||||
A919 | A187 | 1 | G | Z | CD | AJ | CL | AZ | 1 Jun 2005 | |||||||||||||||||||||
C918 | C004 | 1 | G | 1 Jun 2005 | ||||||||||||||||||||||||||
FXGI | FXKZ | 1 | G | Z | SX | 1 Jun 2005 | ||||||||||||||||||||||||
ZU01 | 1 May 2006 | |||||||||||||||||||||||||||||
ZA01 | 1 Jul 2014 | |||||||||||||||||||||||||||||
YC01 | 1 Jul 2015 |
Not Established
SERVICE/AGENCY-MANAGED (Service/Agency use only.) Issue, transfer, or shipment is not subject to specialized controls other than those imposed by individual Services supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with Service requisitioning procedures.
LOCAL PURCHASE (NON-STOCKED ITEMS) Defense Logistics Agency (DLA)/GSA/Service/Agency-managed items authorized for local purchase as normal means of support at base, post, camp or station level. Item not stocked in wholesale distribution system of IMM/Service/Agency ICP.
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
Marine Corps Logistics Base, Albany, GA 31704-1128
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
U.S. Army War Reserve Command, New Cumberland, PA 17070-5008
Oklahoma City Air Logistics Center, Tinker AFB, OK 73145-3043
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
U.S. Army Soldier's Biological and Chemical, Command, Natick, MA 01760
U.S. Army Communications-Electronics, Fort Monmouth, NJ 07703-5006
U.S. Army Tank-Automotive and Armaments, Command, Warren, MI 48397-5000
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
2 | 2 | E | ZZ | M24243/1-D403 | 81349 | ![]() | ||||||
4 | 1 | 4 | KZ | MIL-R-24243 | 81349 | ![]() | ||||||
1 | 5 | 9 | 5 | SB | D | SB4-3 | 10054 | ![]() | ||||
C | 1 | 6 | ZZ | AC | MS24243-1D403 | D9182 | ![]() |
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by engineering data other than an engineering drawing. The data is available for unlimited use and will be furnished by the activity identified by the RNAAC upon request.
USA
Non-Definitive U.S. Government Specification or Standard Reference. Any Government specification or standard reference other than those indicated in code 2 as definitive references. This code shall be used for non-definitive Government specifications and standard references and non-definitive part numbers, type designators, and style numbers included therein which are coded with RNVC 1.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
Defense Supply Center Philadelphia, Philadelphia, PA 19101
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
645 MSSQ/MSIAPCS, Wright-Patterson AFB, OH 45433-5603
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
Navy
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
2 | KZ | 0 | 18 Mar 1982 |
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
Defense Supply Center Philadelphia, Philadelphia, PA 19101
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
KZ | 576 | Z | 9 | A | B | Z | U | 106510 | X | 54760 | RIVETS-I-S-PLAIN-GALVANIZED-ETC |
Defense Supply Center Philadelphia, Philadelphia, PA 19101
Metal and Metal Products, (less than 35 feet)
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
No special handling required.
50
No Variation. NMFC and UFCC Match.
Unit Price | MOE | SOS | AAC | CIIC | QUP | Reparability | UI | SLC |
---|---|---|---|---|---|---|---|---|
DA | SMS | Z | U | 1 | Z | HD | 0 | |
DF | SMS | Z | U | 1 | N | HD | 0 | |
DM | SMS | Z | U | 1 | Z | HD | 0 | |
DN | SMS | Z | U | 1 | HD | 0 | ||
DS | SMS | Z | U | 1 | N | HD | 0 | |
GP | SMS | Z | U | 1 | HD | 0 |
Defense Logistics Agency, Enterprise Business Systems
INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM. Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Unclassified
1
ARMY: This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item; MARINE CORPS: Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code; NAVY: Special Program Consumables
Hundred - One hundred (100) of an item.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
Department of the Army
Department of the Air Force
U.S. Marine Corps
Department of the Navy
Defense Logistics Agency
U.S. Coast Guard
Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
---|---|---|---|---|---|---|---|---|---|---|---|
P | P | 10 | 1 | 000 | 0.2 lbs | 0.012 cu ft |
Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
---|---|---|---|---|---|---|---|---|---|---|---|
00 | 00 | 00 | 0 | D3 | 00 | 00 | E | Q | O |
Primary Inventory Control Activity (PICA)
Primary Inventory Control Activity (PICA)
Physical protection
Any suitable process that is not injurious to the item.
No requirement
No requirement
No requirement
Not Applicable
PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.
No requirement.
No special marking
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AGAV | End Item Identification | W/S: AIRCRAFT, T-39; MISSILE, AIR INTERCEPT, SIDEWINDER (AIM-9); AIRCRAFT, B-2 BOMBER (ATB); SUPPORT EQUIPMENT, B-1 AIRCRAFT; TRUCK, CARGO, DROPSIDE 2, 1/2-TON 6X6 W/E; GENERATOR, 3KW, DIESEL, MILITARY STANDARD FAMILY; GENERATOR SET, 3KW, 60HZ, SKID-MTD, MEP-061B; AIM SIDEWINDER MISSILE SYSTEMS (9P/LM/X); AIRCRAFT, STRATOFORTRESS B-52; AIRCRAFT, PHANTOM F-4 |
ABAF | Expansion Device | PLAIN STEM-TYPE T |
AASB | Fastener Length | 0.284 INCHES MINIMUM AND 0.314 INCHES MAXIMUM |
ANEE | Grip Length | 0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM |
AASU | Head Height | 0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
AAZG | Head Major Diameter | 0.238 INCHES MINIMUM AND 0.262 INCHES MAXIMUM |
AASK | Head Style | UNIVERSAL |
MATT | Material | STEEL COMP 1006 BODY OR STEEL COMP 1008 BODY OR STEEL COMP 1009 BODY OR STEEL COMP 1010 BODY |
MATT | Material | STEEL COMP 1030 MANDREL OR STEEL COMP 1033 MANDREL OR STEEL COMP 1034 MANDREL OR STEEL COMP 1035 MANDREL OR STEEL COMP 1536 MANDREL OR STEEL COMP 1037 MANDREL OR STEEL COMP 1038 MANDREL OR STEEL COMP 1039 MANDREL OR STEEL COMP 1040 MANDREL OR STEEL COMP 1541 MANDREL OR STEEL COMP 1042 MANDREL OR STEEL COMP 1043 MANDREL OR STEEL COMP 1044 MANDREL OR STEEL COMP 1045 MANDREL OR STEEL COMP 1046 MANDREL OR STEEL COMP 1548 MANDREL OR STEEL COMP 1049 MANDREL OR STEEL COMP 1050 MANDREL OR STEEL COMP 1551 MANDREL OR STEEL COMP 1552 MANDREL OR STEEL COMP 1053 MANDREL OR STEEL COMP 1055 MANDREL OR STEEL COMP 1059 MANDREL OR STEEL COMP 1060 MANDREL |
MDCL | Material Document And Classification | 66 FED STD ALL MATERIAL RESPONSES BODY |
MDCL | Material Document And Classification | 66 FED STD ALL MATERIAL RESPONSES MANDREL |
AAZE | Shank Diameter | 0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM |
AAZF | Shank Style | SELF-PLUGGING HIGH CLINCH SHANK |
STDC | Surface Treatment Document And Classification | QQ-Z-325 TY 2 CL 3 FED SPEC 1ST TREATMENT RESPONSE BODY OR QQ-P-416 FED SPEC 2ND TREATMENT RESPONSE BODY OR QQ-P-416 FED SPEC 3RD TREATMENT RESPONSE BODY OR QQ-P-416 FED SPEC 4TH TREATMENT RESPONSE BODY OR MIL-P-16232 TY Z CL 2 MIL SPEC 5TH TREATMENT RESPONSE BODY OR MIL-P-16232 TY Z CL 4B MIL SPEC 5TH TREATMENT RESPONSE BODY |
STDC | Surface Treatment Document And Classification | QQ-Z-325 TY 2 CL 3 FED SPEC 1ST TREATMENT RESPONSE MANDREL OR QQ-P-416 FED SPEC 2ND TREATMENT RESPONSE MANDREL OR QQ-P-416 FED SPEC 3RD TREATMENT RESPONSE MANDREL OR QQ-P-416 FED SPEC 4TH TREATMENT RESPONSE MANDREL OR MIL-P-16232 TY Z CL 2 MIL SPEC 5TH TREATMENT RESPONSE MANDREL OR MIL-P-16232 TY Z CL 4B MIL SPEC 5TH TREATMENT RESPONSE MANDREL |
SFTT | Surface Treatment | ZINC BODY AND CHROMATE BODY OR CADMIUM BODY OR CADMIUM BODY AND CHROMATE BODY OR CADMIUM BODY AND PHOSPHATE BODY OR PHOSPHATE ZINC BODY |
SFTT | Surface Treatment | ZINC MANDREL AND CHROMATE MANDREL OR CADMIUM MANDREL OR CADMIUM MANDREL AND CHROMATE MANDREL OR CADMIUM MANDREL AND PHOSPHATE MANDREL OR PHOSPHATE ZINC MANDREL |