5320-00-959-7214

PIN-RIVET

5320-00-959-7214 (5320009597214, 009597214)
Part Numbers (8 listings): HL18PB6-3 | HS5602-6-3 | BACB30FM6-3 | WC22-6-3 | 1213AS623-6-3 | HL18PB633 | GB511D3-3 | 62550-6-3 |
Summary

FSG 53 / FSC 5320

DEMIL: A

DEMIL INT: 1

HMIC: N

Date Created: 20 May 1966

Unit Weight: 0.1 lbs

Unit Size: None

Unit Pack Cube: 0.007 cu ft

Replacement NSN:

  5320-00-806-5326

Replacement Date: 27 Nov 1980

MSDS: None

Hazmat: None

Request a Quote


;


MASTER CROSS REFERENCE LIST (MCRL) | NSN 5320-00-959-7214 Submit RFQ
Manufacturer Part NumberRNCCRNVCManufacturer NameCAGE
HL18PB6-33 - Design Control Reference2 - Production ItemLISI AEROSPACE CANADA CORP  L4528    CAGE L4528  
HL18PB6-33 - Design Control Reference2 - Production ItemHI-SHEAR CORPORATION  73197    CAGE 73197  
HL18PB6-35 - Replaced / Discontinued2 - Production ItemALCOA FASTENING SYSTEMS  C4293    CAGE C4293  
HL18PB6-35 - Replaced / Discontinued2 - Production ItemSPS TECHNOLOGIES, LLC  56878    CAGE 56878  
HL18PB6-35 - Replaced / Discontinued2 - Production ItemSATAIR A/S  R1120    CAGE R1120  
HL18PB6-35 - Replaced / Discontinued2 - Production ItemHUCK INTERNATIONAL, INC.  17446    CAGE 17446  
HL18PB6-35 - Replaced / Discontinued2 - Production ItemALCOA GLOBAL FASTENERS, INC.  06950    CAGE 06950  
HL18PB6-35 - Replaced / Discontinued2 - Production ItemSPS TECHNOLOGIES LLC  06725    CAGE 06725  
HL18PB6-35 - Replaced / Discontinued2 - Production ItemALCOA GLOBAL FASTENERS, INC.  1RC86    CAGE 1RC86  
HL18PB6-35 - Replaced / Discontinued2 - Production ItemWEST COAST AEROSPACE INC  60516    CAGE 60516  
HL18PB6-35 - Replaced / Discontinued9 - No Longer UsedHUCK INTL INC  97928    CAGE 97928  
HL18PB6-35 - Replaced / Discontinued9 - No Longer UsedALCOA GLOBAL FASTENERS, INC.  92215    CAGE 92215  
HL18PB6-35 - Replaced / Discontinued9 - No Longer UsedSPS TECHNOLOGIES, LLC  80539    CAGE 80539  
HS5602-6-37 - Vendor Item Drawing Reference2 - Production ItemBOEING COMPANY, THE  8V613    CAGE 8V613  
BACB30FM6-37 - Vendor Item Drawing Reference2 - Production ItemTHE BOEING COMPANY  81205    CAGE 81205  
HS5602-6-3C - Advisory Reference1 - Incomplete Part NumberMCDONNELL DOUGLAS HELICOPTER CO INC  02731    CAGE 02731  
WC22-6-3C - Advisory Reference1 - Incomplete Part NumberWEST COAST AEROSPACE INC  60516    CAGE 60516  
1213AS623-6-3C - Advisory Reference1 - Incomplete Part NumberNAVAL AIR SYSTEMS COMMAND  30003    CAGE 30003  
HL18PB633C - Advisory Reference1 - Incomplete Part NumberHI-SHEAR CORPORATION  73197    CAGE 73197  
GB511D3-3C - Advisory Reference1 - Incomplete Part NumberNORTHROP GRUMMAN SYSTEMS CORPORATION  26512    CAGE 26512  
62550-6-3C - Advisory Reference1 - Incomplete Part NumberSPS TECHNOLOGIES, LLC  56878    CAGE 56878  
Code Definitions

3 - Design Control Reference

Reference Number Category Code (DRN_2910)


Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.

5 - Replaced / Discontinued

Reference Number Category Code (DRN_2910)


Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.

7 - Vendor Item Drawing Reference

Reference Number Category Code (DRN_2910)


Vendor Item Drawing Reference (formerly Specification Control Reference). The number assigned by a design activity to a drawing that is not item-identifying, but which delineates existing commercial or vendor-developed items meeting all engineering and test requirements specified, without imposing additional test/engineering requirements not normally provided by the vendor(s). Includes only those drawings which meet the definition for Vendor Item Drawing in MIL-STD 100. Vendor Item Drawing References are administrative control numbers and shall not be used as part identification numbers.

C - Advisory Reference

Reference Number Category Code (DRN_2910)


Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.

2 - Production Item

Reference Number Variation Code (DRN_4780)


A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.

9 - No Longer Used

Reference Number Variation Code (DRN_4780)


A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.

1 - Incomplete Part Number

Reference Number Variation Code (DRN_4780)


A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.


FLIS - SEG A - IDENTIFICATION | NSN 5320-00-959-7214 Submit RFQ
FSGFSCNIINFIIGINCCRITICALITYTYPE OF ITEMMRCDEMILHMICEDCPMICADPECDATE CREATED
535320009597214A528U067165X43ANA020 May 1966
Code Definitions

53

Federal Supply Group (FSG_3994/FSC_WI_FSG_3996)


Hardware and Abrasives

5320

Federal Supply Class (FSC_3994/FSC_WI_FSC_3996)


Rivets

009597214

National Item Identification Number (NCB_CD_4130/I_I_NBR_4131)


NSN 5320-00-959-7214

A528U0

Federal Item Identification Guide (FIIG_4065)

67165

Item Naming Code (INC_4080)

20 May 1966

NIIN Assignment Date (DT_NIIN_ASGMT_2180)

X

Item Criticality (CRITL_CD_FIIG_3843)


The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

4

Type of Item Identification (TYP_II_4820)


Partial Descriptive Item Identification (Type 1 Concept)

3

Reference / Partial Descriptive Method Reason Code (RPDMRC_4765)


An approved item name and FIIG exist but the item involved is so unique in design that it cannot be fully described in accordance with the FIIG.

A

Demilitarization Code (DEMIL_CD_0167)


Non-MLI/ Non-SLI — Demilitarization not required.

N

Hazardous Material Indicator Code (HMIC_0865)


Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.

A

Precious Metals Indicator Code (PMIC_0802)


Item does not contain Precious Metal.

0

ADPE Identification Code (ADPEC_0801)


Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)


Similar & Related NSN Parts

FLIS - SEG B - MOE RULE DATA | NSN 5320-00-959-7214 Submit RFQ
MOE RuleFormer MOEAMCAMSCNIMSCIMCIMC ActivityAACDSORCollaboratorsReceiversEffective Date
YB011 Apr 1991
ZA011 Apr 1991
ZB011 Apr 1991
ZC011 Apr 1991
ZE011 Apr 1991
ZG011 Apr 1991
ZH011 Apr 1991
ZK011 Apr 1991
ZN011 Apr 1991
ZP011 Apr 1991
YJ011 Apr 1991
ZT011 Apr 1991
ZU011 Apr 1991
ZF011 Apr 1996
YA011 Oct 2000
ZS011 Oct 2002
WP011 Aug 2005
ZW011 Nov 2005
A919A1871CZCTCT1 Apr 2006
C918C0041CXH1 Apr 2006
FXGIFXKZ1CZSX1 Apr 2006
N9BZNIZD1CZGHGTKE1 Apr 2006
YW011 Jul 2007
ZR011 Sep 2007
WI011 Jan 2010
ZX011 Jan 2014
YK011 Jan 2015
YC011 Jul 2015
YD011 Oct 2016
Code Definitions

1

Acquisition Method Code (AMC_2871)


Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.

C

Acquisition Method Suffix Code (AMSC_2876)


This part requires engineering source approval by the design control activity in order to maintain the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. Valid AMCs: 1, 2, 3, 4 and 5.

Z

Item Management Code (IMC_2744)


Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.

CT

Item Management Coding Activity (IMC_ACTY_2748)


U.S. Army Aviation and Missile Command (AIR) Redstone Arsenal, AL 35898-5230

SX

Item Management Coding Activity (IMC_ACTY_2748)


Oklahoma City Air Logistics Center, Tinker AFB, OK 73145-3043

GH

Item Management Coding Activity (IMC_ACTY_2748)


Naval Inventory Control Point, Mechanicsburg, PA 17055-0788

KE Collaborators

Supplementary Collaborators (SUPPLM_COLLBR_2533)


Naval ICP, Philadelphia, PA 19111

CT

Supplementary Receivers (SUPPLM_RCVR_2534)


U.S. Army Aviation and Missile Command (AIR) Redstone Arsenal, AL 35898-5230

XH

Supplementary Receivers (SUPPLM_RCVR_2534)


USCG Aircraft Repair and Supply Center, Elizabeth City, NC 27909-5001


FLIS - SEG C - REFERENCE NUMBER | NSN 5320-00-959-7214 Submit RFQ
RNFCRNCCRNVCDACRNAACRNSCRNJCSADCMSDSHCCReference NumberCAGE
325KZHL18PB6-3  73197   CAGE/73197
325ZZHL18PB6-3  L4528   CAGE/L4528
4526ZGDHL18PB6-3  R1120   CAGE/R1120
4523ZGAHL18PB6-3  C4293   CAGE/C4293
525ZZHL18PB6-3  56878   CAGE/56878
525KZHL18PB6-3  60516   CAGE/60516
526ZZHL18PB6-3  06725   CAGE/06725
526ZZHL18PB6-3  06950   CAGE/06950
525ZZHL18PB6-3  17446   CAGE/17446
525ZZHL18PB6-3  1RC86   CAGE/1RC86
595KZBHL18PB6-3  80539   CAGE/80539
595KZBHL18PB6-3  92215   CAGE/92215
595KZBHL18PB6-3  97928   CAGE/97928
725KZBACB30FM6-3  81205   CAGE/81205
47219ZDHS5602-6-3  8V613   CAGE/8V613
C15ZZAFHS5602-6-3  02731   CAGE/02731
C15ZZAFGB511D3-3  26512   CAGE/26512
C15ZZAF1213AS623-6-3  30003   CAGE/30003
C15ZZAF62550-6-3  56878   CAGE/56878
C15ZZAFWC22-6-3  60516   CAGE/60516
C15ZZACHL18PB633  73197   CAGE/73197
Code Definitions

3

Reference Number Category Code (RNCC_2910)


Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.

2

Reference Number Variation Code (RNVC_4780)


A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.

5

Document Availability Code (DAC_2640)


The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.

KZ

Reference Number Action Activity Code (RNAAC_2900)


Defense Supply Center Philadelphia, Philadelphia, PA 19101

ZZ

Reference Number Action Activity Code (RNAAC_2900)


USA

4

Reference Number Format Code (RNFC_2920)


Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.

5

Reference Number Category Code (RNCC_2910)


Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.

6

Document Availability Code (DAC_2640)


The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.

ZG

Reference Number Action Activity Code (RNAAC_2900)


Germany

D

Reference Number Status Code (RNSC_2923)


Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.

3

Document Availability Code (DAC_2640)


The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the technical documentation upon request.

A

Reference Number Status Code (RNSC_2923)


Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.

9

Reference Number Variation Code (RNVC_4780)


A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.

B

Reference Number Status Code (RNSC_2923)


Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.

7

Reference Number Category Code (RNCC_2910)


Vendor Item Drawing Reference (formerly Specification Control Reference). The number assigned by a design activity to a drawing that is not item-identifying, but which delineates existing commercial or vendor-developed items meeting all engineering and test requirements specified, without imposing additional test/engineering requirements not normally provided by the vendor(s). Includes only those drawings which meet the definition for Vendor Item Drawing in MIL-STD 100. Vendor Item Drawing References are administrative control numbers and shall not be used as part identification numbers.

1

Document Availability Code (DAC_2640)


The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.

9Z

Reference Number Action Activity Code (RNAAC_2900)


DLIS-K, Battle Creek, MI 49037-3084

C

Reference Number Category Code (RNCC_2910)


Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.

1

Reference Number Variation Code (RNVC_4780)


A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.

AF

Service / Agency Designator Code (SADC_4672)


Defense Logistics Agency

AC

Service / Agency Designator Code (SADC_4672)


Navy


FLIS - SEG E - ITEM STANDARDIZATION DATA | NSN 5320-00-959-7214 Submit RFQ
ISCOriginatorNIIN StatusReplaced / Replacement ISCReplaced / Replacement OriginatorReplacement NIIN StatusReplacement DateReplaced / Replacement NSNDecision Date
1KZ03KZ127 Nov 1980 5320008065326 1 Dec 1980
1KZ03KZ027 Nov 1980 5320010063987 1 Dec 1980
Code Definitions

1

Item Standardization Code (ISC_2650)


An item authorized for procurement as a result of a formal item reduction study and accepted as a replacement for one or more items not authorized for procurement. In addition, in generic relationships, a code 1 item is related to a code 2 item.

KZ

Originator of Standardization Decision (ORG_STDZN_DEC_9325)


Defense Supply Center Philadelphia, Philadelphia, PA 19101

0

NIIN Status Code (NIIN_STAT_CD_2670)


Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.

3

Replaced / Replacement Item Standardization Code (ISC_2650)


An item which, as a result of a formal item reduction study, is accepted as not authorized for procurement.

1

Replaced / Replacement NIIN Status Code (NIIN_STAT_CD_2670)


Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. See volume 4, chapter 4.9.Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.

27 Nov 1980

Date of Replacement Standardization Decision (DT_STDZN_DEC_2300)

5320-00-806-5326

Replaced / Replacement NSN (RP_NSN_STD_RL_8977 / RPLM_NSN_STDZ_9525)

5320-01-006-3987

Replaced / Replacement NSN (RP_NSN_STD_RL_8977 / RPLM_NSN_STDZ_9525)

1 Dec 1980

Standardization Decision Date (DT_STDZN_DEC_2300)


FLIS - SEG G - FREIGHT DATA | NSN 5320-00-959-7214 Submit RFQ
IntegrityOriginatingHMCLCLWCCTCCSHCADCACCASHLTLNMFCNMFC Sub ItemUFCFreight DescriptionRail Variance
KZ713Z9ABZQ095190J49790HARDWARE--NOI-SUB-9
Code Definitions

KZ

Originating Activity Code (ORIG_ACTY_CD_4210)


Defense Supply Center Philadelphia, Philadelphia, PA 19101

713

Water Commodity Code (WRT_CMDTY_CD_9275)


Metal Hardware

Z

Type Cargo Code (TYPE_CGO_CD_9260)


No special type of cargo code applicable

9

Special Handling Code (SP_HDLG_CD_9240)


No special handling required

A

Air Dimension Code (AIR_DIM_CD_9220)


Shipment is not a consolidation and does not exceed 72 inches in any dimension.

B

Air Commodity Code (AIR_CMTY_HDLG_9215)


Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.

Z

Air Special Handling Code (AIR_CMTY_HDLG_9215)


No special handling required.

Q

Less Than Truckload (CLAS_RTNG_CD_2770)


70

095190

National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)

J

NMFC Sub Item Number (SUB_ITM_NBR_0861)

49790

Uniform Freight Classification (UFC_CD_MODF_3040)

HARDWARE--NOI-SUB-9

Freight Description (FRT_DESC_4020)

Rail Variance

Rail Variance (RAIL_VARI_CD_4760)


No Variation. NMFC and UFCC Match.


FLIS - SEG H - MANAGEMENT DATA | NSN 5320-00-959-7214 Submit RFQ
Unit PriceMOESOSAACCIICQUPReparabilityUISLC
DFSMSDUQNEA0
DNSMSDUQEA0
DSSMSDUQNEA0
GPSMSDUQEA0
DASMSDUQZEA0
Code Definitions

SMS

Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)


Defense Logistics Agency, Enterprise Business Systems

D

Acquisition Advice Code (AAC_2507)


DoD INTEGRATED MATERIEL-MANAGED, STOCKED, AND ISSUED. Issue, transfer, or shipment is not subject to specialized controls other than those imposed by the Integrated Materiel Manager/Service supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions must contain the fund citation required to acquire the item. Requisitions will be submitted in accordance with Integrated Materiel Manager(IMM)/Service requisitioning procedures.

U

Controlled Item Inventory Code (CIIC_2863)


Unclassified

Q

Quantity Unit Pack (QUP_6106)


100

N

Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)


AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms

EA

Unit of Issue (UI_3050)


Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.

0

Shelf Life Code (SLC_2943)


TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.

Z

Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)


ARMY: This is a nonreparable item. If condemned or economically unserviceable, then dispose at the level authorized replace the item; MARINE CORPS: Nonreparable item. When unserviceable, condemn and dispose at the level indicated by the first digit of the maintenance code; NAVY: Special Program Consumables

DF

Service / Agency Code (MOE_CD_2833)


Department of the Air Force

DN

Service / Agency Code (MOE_CD_2833)


Department of the Navy

DS

Service / Agency Code (MOE_CD_2833)


Defense Logistics Agency

GP

Service / Agency Code (MOE_CD_2833)


U.S. Coast Guard

DA

Service / Agency Code (MOE_CD_2833)


Department of the Army


FLIS - SEG W - PACKAGING DATA | NSN 5320-00-959-7214 Submit RFQ
SourcePICA / SICAPackaging CategoryStoragePreservationClean/DryINT QtyUnit WeightUnit SizeUnit Pack CubeItem WeightItem Dims
PP101AAA0.1 lbs0.007 cu ft
Preservation MaterialWrapping MaterialCushioning / DunnageCushioning ThicknessUnit ContainerIntermediate ContainerUnit Container LevelSpecial MarkingLevel A PackingLevel B PackingMinimal PackingOptional Procedure
00XD3D300EQO
Code Definitions

P

Packaging Data Source Code (PK_DTA_SRC_CD_5148)


Primary Inventory Control Activity (PICA)

P

Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)


Primary Inventory Control Activity (PICA)

10

Method of Preservation Code (MTHD_PRSRV_CD_5160)


Physical protection

1

Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)


Any suitable process that is not injurious to the item.

AAA

Intermediate Container Quantity (INTMD_CTN_QTY_5152)

0.1 lbs

Unit Pack Weight (UP_WT_5153)

0.007 cu ft

Unit Pack Cube (UP_CU_5155)

00

Preservation Material Code (PRSRV_MAT_CD_5162)


No requirement

X

Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)


As required to protect the item or elements of the package

D3

Unit Container Code (UNIT_CTNR_CD_5166)


PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.

D3

Intermediate Container Code (INTMD_CTNR_CD_5167)


PPP-B-566, PPP-B-676, or ASTM-D5118, folding, setup or fiberboard box.

00

Special Marking Code (SP_MKG_CD_5169)


No special marking

E

Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)


Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.

Q

Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)


Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

O

Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)


Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.


FLIS - SEG M/V - CHARACTERISTICS DATA | NSN 5320-00-959-7214 Submit RFQ
MRCDecoded RequirementClear Text Reply
AGAVEnd Item IdentificationENGINE, AIRCRAFT TF33-PW-102 (C-135E, EC-135H/K/P);ENGINE, AIRCRAFT, J-57 ALL MODELS (C-135, EC-135, B-52);AIRCRAFT, SOF ( AC-130H, MC-130H, EC-130E,HC-130);HELICOPTER, SEARCH AND RESCUE, HH-60H;ENGINE, AIRCRAFT TF33-P-3/5/9 (C/EC-135, B-52H);AIRCRAFT, C-2A (REPROCURED);HELICOPTER, MH-53E;ENGINE, AIRCRAFT, TF-33-P-7 (C-141A/B);HELICOPTER, CARRIER BASED ASW, SH-60F.
AASBFastener Length0.503 INCHES MINIMUM AND 0.523 INCHES MAXIMUM
ANEEGrip Length0.193 INCHES MAXIMUM
AASUHead Height0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
AAZGHead Major Diameter0.295 INCHES MINIMUM AND 0.315 INCHES MAXIMUM
MDCLMaterial Document And ClassificationMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
MATTMaterialSTEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 4130 OVERALL
CQBCMinimum Tensile Strength160000 POUNDS PER SQUARE INCH
CQJXNominal Thread Size0.190 INCHES
AAZEShank Diameter0.189 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
AAZFShank StylePIN-RIVET, STRAIGHT, THREADED
CQSXShear Strength95000 SINGLE POUNDS PER SQUARE INCH
AATBWidth Between Flats0.079 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
STDCSurface Treatment Document And ClassificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SFTTSurface TreatmentCADMIUM OVERALL
AAJDThread Class3A
AAJFThread DirectionRIGHT-HAND
THSDThread Series DesignatorUNJF

Questions?


Want to know more about our Defense Services?


Contact Us. We are here to help.


Questions?


Have any questions regarding a Request For Quote?


Contact Us. We are here to help.


Questions?


Ask about our Supply Management Services.


Contact Us. We are here to help.


Back to Top
Back to Top