- FSG 53 - Hardware and Abrasives
- FSC 5320 - Rivets
- NSN 5320-01-219-1308
5320-01-219-1308
RIVET,BLIND
5320-01-219-1308 (5320012191308, 012191308)
Part Number (1 listing): MS90353S06-19
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| MS90353S06-19 | 2 - Definitive Specification or Standard Document | 2 - Production Item | MILITARY STANDARDS | 96906 |  |
2 - Definitive Specification or Standard Document
Reference Number Category Code (DRN_2910)
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 53 | 5320 | 012191308 | A040A0 | 00864 | X | 1 | A | N | U | 22 Oct 1985 |
A040A0
Federal Item Identification Guide (FIIG_4065)
00864
Item Naming Code (INC_4080)
22 Oct 1985
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZN01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2 | 2 | 4 | 9Z | D | MS90353S06-19 | 96906 | | |||||
2
Reference Number Category Code (RNCC_2910)
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
4
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
9Z
Reference Number Action Activity Code (RNAAC_2900)
DLIS-K, Battle Creek, MI 49037-3084
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 5 | 97 | 0 | 22 Oct 1985 |
5
Item Standardization Code (ISC_2650)
An item authorized for procurement that has not yet been subject to item standardization.
97
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
DLIS-LFF, Battle Creek, MI 49037-3084
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
22 Oct 1985
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZN |
ZN
Originating Activity Code (ORIG_ACTY_CD_4210)
Netherlands
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABAF | Expansion Device | SERRATED STEM-TYPE W |
| AASB | Fastener Length | 1.365 INCHES NOMINAL |
| ANEE | Grip Length | 1.156 INCHES MINIMUM AND 1.220 INCHES MAXIMUM |
| CQFM | Hardness Rating | 326.0 KNOOP MINIMUM SLEEVE AND 466.0 KNOOP MAXIMUM SLEEVE |
| CQFM | Hardness Rating | 48.0 ROCKWELL C MINIMUM STEM AND 53.0 ROCKWELL C MAXIMUM STEM |
| AAZG | Head Major Diameter | 0.386 INCHES NOMINAL |
| AASK | Head Style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MATT | Material | STEEL COMP 1010 MECHANICAL LOCK OR STEEL COMP 1020 MECHANICAL LOCK OR STEEL COMP 1144 MECHANICAL LOCK OR STEEL COMP 4037 MECHANICAL LOCK OR STEEL COMP 4130 MECHANICAL LOCK OR IRON ALLOY 660 MECHANICAL LOCK |
| MATT | Material | STEEL SLEEVE |
| MATT | Material | STEEL STEM |
| MDCL | Material Document And Classification | 66 FED STD 1ST MATERIAL RESPONSE MECHANICAL LOCK OR 66 FED STD 2ND MATERIAL RESPONSE MECHANICAL LOCK OR 66 FED STD 3RD MATERIAL RESPONSE MECHANICAL LOCK OR 66 FED STD 4TH MATERIAL RESPONSE MECHANICAL LOCK OR 66 FED STD 5TH MATERIAL RESPONSE MECHANICAL LOCK OR AMS5737 ASSN STD 6TH MATERIAL RESPONSE MECHANICAL LOCK |
| MDCL | Material Document And Classification | ASTM-A-331 ASSN STD ALL MATERIAL RESPONSES SLEEVE |
| MDCL | Material Document And Classification | ASTM-A-331 ASSN STD ALL MATERIAL RESPONSES STEM |
| AAZE | Shank Diameter | 0.197 INCHES MINIMUM AND 0.199 INCHES MAXIMUM |
| AAZF | Shank Style | |
| STDC | Surface Treatment Document And Classification | QQ-P-416 TYPE 1 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| STDC | Surface Treatment Document And Classification | QQ-P-416 TYPE 2 CLASS 2 FED SPEC 1ST TREATMENT RESPONSE MECHANICAL LOCK AND QQ-P-35 FED SPEC 2ND TREATMENT RESPONSE MECHANICAL LOCK |
| STDC | Surface Treatment Document And Classification | QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| SFTT | Surface Treatment | CADMIUM MECHANICAL LOCK OR PASSIVATE MECHANICAL LOCK |
| SFTT | Surface Treatment | CADMIUM SLEEVE |
| SFTT | Surface Treatment | CADMIUM STEM |
Back to TopBack to Top
