- FSG 53 - Hardware and Abrasives
- FSC 5320 - Rivets
- NSN 5320-01-247-7620
5320-01-247-7620
RIVET,BLIND
5320-01-247-7620 (5320012477620, 012477620)
Part Number (1 listing): PLT1028-8-10
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| PLT1028-8-10 | 3 - Design Control Reference | 2 - Production Item | ALCOA GLOBAL FASTENERS, INC. | 92215 |  |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 53 | 5320 | 012477620 | A040A0 | 00864 | X | 4 | 6 | A | N | U | 12 Jan 1987 |
A040A0
Federal Item Identification Guide (FIIG_4065)
00864
Item Naming Code (INC_4080)
12 Jan 1987
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
4
Type of Item Identification (TYP_II_4820)
Partial Descriptive Item Identification (Type 1 Concept)
6
Reference / Partial Descriptive Method Reason Code (RPDMRC_4765)
An approved item name and FIIG may exist, but it has previously been established and documented that industry refuses to provide the technical data sufficient for preparation on a full descriptive method item identification based on policy, restricted or proprietary data rights, nonexistence of technical data, etc.
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZC01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 2 | 2 | 9Z | D | PLT1028-8-10 | 92215 | | |||||
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
2
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the drawing.
9Z
Reference Number Action Activity Code (RNAAC_2900)
DLIS-K, Battle Creek, MI 49037-3084
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 5 | 97 | 0 | 12 Jan 1987 |
5
Item Standardization Code (ISC_2650)
An item authorized for procurement that has not yet been subject to item standardization.
97
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
DLIS-LFF, Battle Creek, MI 49037-3084
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
12 Jan 1987
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZC |
ZC
Originating Activity Code (ORIG_ACTY_CD_4210)
Canada
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABAF | Expansion Device | THREADED SLEEVE |
| ANEE | Grip Length | 0.595 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| CQFM | Hardness Rating | 48.0 ROCKWELL C MINIMUM STEM AND 53.0 ROCKWELL C MAXIMUM STEM |
| AASK | Head Style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| AAZG | Head Major Diameter | 0.499 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| MATT | Material | NICKEL ALLOY X-750 SLEEVE |
| MATT | Material | STEEL COMP H11 BODY |
| MATT | Material | STEEL COMP H11 STEM |
| CQBC | Minimum Tensile Strength | 3650 POUNDS PER SQUARE INCH |
| MDCL | Material Document And Classification | AMS5667 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE OR AMS5582 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE OR AMS5731 ASSN STD SINGLE MATERIAL RESPONSE SLEEVE OR AMS5732 ASSN STD 1ST MATERIAL RESPONSE SLEEVE OR AMS5737 ASSN STD 2ND MATERIAL RESPONSE SLEEVE |
| MDCL | Material Document And Classification | AMS6487 ASSN STD SINGLE MATERIAL RESPONSE STEM |
| MDCL | Material Document And Classification | AMS6487 ASSN STD SINGLE MATERIAL RESPONSE BODY |
| AAZE | Shank Diameter | 0.2890 INCHES MINIMUM AND 0.2910 INCHES MAXIMUM |
| CQSX | Shear Strength | 11800 DOUBLE POUNDS PER SQUARE INCH |
| AAZF | Shank Style | THREADED SELF-PLUGGING SHANK W/SLEEVE |
| STDC | Surface Treatment Document And Classification | NAS672 ASSN STD 1ST TREATMENT RESPONSE BOLT AND QQ-P-416 FED SPEC 2ND TREATMENT RESPONSE BOLT |
| STDC | Surface Treatment Document And Classification | NAS672 ASSN STD 1ST TREATMENT RESPONSE STEM AND QQ-P-416 FED SPEC 2ND TREATMENT RESPONSE STEM |
| STDC | Surface Treatment Document And Classification | NAS672 ASSN STD 1ST TREATMENT RESPONSE SLEEVE AND QQ-P-416 TYPE 1,CLASS 3 FED SPEC 2ND TREATMENT RESPONSE SLEEVE |
| SFTT | Surface Treatment | CADMIUM BODY AND CHROMATE BODY |
| SFTT | Surface Treatment | CADMIUM SLEEVE |
| SFTT | Surface Treatment | CADMIUM STEM AND CHROMATE STEM |
Back to TopBack to Top
