- FSG 53 - Hardware and Abrasives
- FSC 5320 - Rivets
- NSN 5320-01-252-7803
5320-01-252-7803
RIVET,BLIND
5320-01-252-7803 (5320012527803, 012527803)
Part Number (1 listing): PLT151-8-5
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| PLT151-8-5 | 3 - Design Control Reference | 2 - Production Item | ALCOA GLOBAL FASTENERS, INC. | 92215 |  |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 53 | 5320 | 012527803 | A040A0 | 00864 | X | 4 | 6 | A | N | U | 8 Apr 1987 |
A040A0
Federal Item Identification Guide (FIIG_4065)
00864
Item Naming Code (INC_4080)
8 Apr 1987
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
4
Type of Item Identification (TYP_II_4820)
Partial Descriptive Item Identification (Type 1 Concept)
6
Reference / Partial Descriptive Method Reason Code (RPDMRC_4765)
An approved item name and FIIG may exist, but it has previously been established and documented that industry refuses to provide the technical data sufficient for preparation on a full descriptive method item identification based on policy, restricted or proprietary data rights, nonexistence of technical data, etc.
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZC01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZN01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZH01 | 1 Mar 1998 | |||||||||||||||||||||||||||||
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 2 | 4 | 9Z | D | PLT151-8-5 | 92215 | | |||||
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
4
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
9Z
Reference Number Action Activity Code (RNAAC_2900)
DLIS-K, Battle Creek, MI 49037-3084
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 5 | 97 | 0 | 8 Apr 1987 |
5
Item Standardization Code (ISC_2650)
An item authorized for procurement that has not yet been subject to item standardization.
97
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
DLIS-LFF, Battle Creek, MI 49037-3084
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
8 Apr 1987
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZC |
ZC
Originating Activity Code (ORIG_ACTY_CD_4210)
Canada
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ABAF | Expansion Device | THREADED SLEEVE |
| CBBL | Features Provided | SELF-LOCKING |
| ANEE | Grip Length | 0.282 INCHES MINIMUM AND 0.344 INCHES MAXIMUM |
| CQFM | Hardness Rating | 48.0 ROCKWELL C MINIMUM NUT AND 53.0 ROCKWELL C MAXIMUM NUT |
| AASK | Head Style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| AAZG | Head Major Diameter | 0.499 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| AAPC | Identification Code Color | BLUE |
| MATT | Material | NICKEL ALLOY X-750 SLEEVE OR IRON ALLOY 660 SLEEVE |
| MATT | Material | STEEL COMP H11 BOLT |
| MATT | Material | STEEL COMP H11 NUT |
| CQBC | Minimum Tensile Strength | 3650 POUNDS PER SQUARE INCH |
| MDCL | Material Document And Classification | AMS 5667 ASSN STD 1ST MATERIAL RESPONSE SLEEVE OR AMS 5582 ASSN STD 1ST MATERIAL RESPONSE SLEEVE OR AMS 5731 ASSN STD 2ND MATERIAL RESPONSE SLEEVE OR AMS 5732 ASSN STD 2ND MATERIAL RESPONSE SLEEVE OR AMS 5737 ASSN STD 2ND MATERIAL RESPONSE SLEEVE |
| MDCL | Material Document And Classification | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE BOLT |
| MDCL | Material Document And Classification | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE NUT |
| AAZE | Shank Diameter | 0.274 INCHES MINIMUM AND 0.276 INCHES MAXIMUM |
| CQSX | Shear Strength | 11800 DOUBLE POUNDS PER SQUARE INCH |
| AAZF | Shank Style | THREADED SELF-PLUGGING SHANK W/SLEEVE |
| FEAT | Special Features | 1/64 IN. OVERSIZE |
| STDC | Surface Treatment Document And Classification | QQ-P-416 FED SPEC 1ST TREATMENT RESPONSE BOLT AND NAS 672 ASSN STD 2ND TREATMENT RESPONSE BOLT |
| STDC | Surface Treatment Document And Classification | QQ-P-416 FED SPEC 1ST TREATMENT RESPONSE NUT AND NAS 672 ASSN STD 2ND TREATMENT RESPONSE NUT |
| STDC | Surface Treatment Document And Classification | QQ-P-416,TYP 1,CLS 3 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| SFTT | Surface Treatment | CHROMATE BOLT AND CADMIUM BOLT |
| SFTT | Surface Treatment | CHROMATE NUT AND CADMIUM NUT |
| SFTT | Surface Treatment | CADMIUM SLEEVE |
Back to TopBack to Top
