- FSG 53 - Hardware and Abrasives
- FSC 5320 - Rivets
- NSN 5320-01-292-8799
5320-01-292-8799
RIVET,BLIND
5320-01-292-8799 (5320012928799, 012928799)
Part Numbers (2 listings): MS93054U1004 | UBP-T10-04 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| MS93054U1004 | 2 - Definitive Specification or Standard Document | 2 - Production Item | MILITARY STANDARDS | 96906 |  |
| UBP-T10-04 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | HUCK INTERNATIONAL, INC. | 0HDW7 |  |
| UBP-T10-04 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | SPS TECHNOLOGIES, LLC | 80539 |  |
| UBP-T10-04 | 5 - Replaced / Discontinued | 9 - No Longer Used | HUCK INTERNATIONAL, INC. | 17446 |  |
2 - Definitive Specification or Standard Document
Reference Number Category Code (DRN_2910)
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
1 - Incomplete Part Number
Reference Number Variation Code (DRN_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 53 | 5320 | 012928799 | A040A0 | 00864 | X | 1 | A | N | U | 23 Jan 1989 |
A040A0
Federal Item Identification Guide (FIIG_4065)
00864
Item Naming Code (INC_4080)
23 Jan 1989
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZC01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4 | 2 | 2 | 4 | 9Z | D | MS93054U1004 | 96906 | | ||||
| 4 | 5 | 1 | 4 | 9Z | D | UBP-T10-04 | 80539 | | ||||
| 5 | 1 | 4 | 9Z | UBP-T10-04 | 0HDW7 | | ||||||
| 4 | 5 | 9 | 4 | 9Z | B | UBP-T10-04 | 17446 | | ||||
4
Reference Number Format Code (RNFC_2920)
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
2
Reference Number Category Code (RNCC_2910)
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
4
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
9Z
Reference Number Action Activity Code (RNAAC_2900)
DLIS-K, Battle Creek, MI 49037-3084
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
1
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 5 | 97 | 0 | 23 Jan 1989 |
5
Item Standardization Code (ISC_2650)
An item authorized for procurement that has not yet been subject to item standardization.
97
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
DLIS-LFF, Battle Creek, MI 49037-3084
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
23 Jan 1989
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZC |
ZC
Originating Activity Code (ORIG_ACTY_CD_4210)
Canada
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| ABAF | Expansion Device | SERRATED STEM-TYPE W |
| AASB | Fastener Length | 0.506 INCHES NOMINAL |
| ANEE | Grip Length | 0.219 INCHES MINIMUM AND 0.282 INCHES MAXIMUM |
| CQFM | Hardness Rating | 326.0 KNOOP MINIMUM SLEEVE AND 466.0 KNOOP MAXIMUM SLEEVE |
| CQFM | Hardness Rating | 48.0 ROCKWELL C MINIMUM STEM AND 53.0 ROCKWELL C MAXIMUM STEM |
| AASU | Head Height | 0.131 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| AASK | Head Style | UNDERCUT PAN NO. 2 |
| AAZG | Head Major Diameter | 0.480 INCHES MINIMUM AND 0.522 INCHES MAXIMUM |
| MATT | Material | STEEL COMP 1010 MECHANICAL LOCK OR STEEL COMP 1020 MECHANICAL LOCK OR STEEL COMP 1144 MECHANICAL LOCK OR STEEL COMP 4037 MECHANICAL LOCK OR STEEL COMP 4130 MECHANICAL LOCK OR IRON ALLOY 660 MECHANICAL LOCK OR STEEL COMP 316 MECHANICAL LOCK |
| MATT | Material | STEEL COMP 4027 SLEEVE OR STEEL COMP 8740 SLEEVE |
| MATT | Material | STEEL COMP 8740 STEM OR STEEL COMP 8740 STEM |
| CQBC | Minimum Tensile Strength | 5200 POUNDS PER SQUARE INCH |
| MDCL | Material Document And Classification | 66,UNS G10100 FED STD 1ST MATERIAL RESPONSE MECHANICAL LOCK OR 66,G10200 FED STD 2ND MATERIAL RESPONSE MECHANICAL LOCK OR 66,G11440 FED STD 3RD MATERIAL RESPONSE MECHANICAL LOCK OR 66,G40370 FED STD 4TH MATERIAL RESPONSE MECHANICAL LOCK OR 66,G41300 FED STD 5TH MATERIAL RESPONSE MECHANICAL LOCK OR AMS 5737,K66286 ASSN STD 6TH MATERIAL RESPONSE MECHANICAL LOCK OR AMS 5690,S31600 ASSN STD 7TH MATERIAL RESPONSE MECHANICAL LOCK |
| MDCL | Material Document And Classification | ASTM A331,UNS G40120 THRU G47200 ASSN STD ALL MATERIAL RESPONSES SLEEVE |
| MDCL | Material Document And Classification | ASTM A331,UNS G40120 THRU G47200 ASSN STD ALL MATERIAL RESPONSES STEM |
| AAZE | Shank Diameter | 0.310 INCHES MINIMUM AND 0.312 INCHES MAXIMUM |
| AAZF | Shank Style | SELF-PLUGGING MECHANICALLY LOCKED STEM |
| CQSX | Shear Strength | 8500 SINGLE POUNDS PER SQUARE INCH |
| ZZZK | Specification/Standard Data | 96906-MS90354 GOVERNMENT STANDARD |
| STDC | Surface Treatment Document And Classification | QQ-P-416,TYPE 1,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| STDC | Surface Treatment Document And Classification | QQ-P-416,TYPE 2,CLASS 2 FED SPEC 1ST TREATMENT RESPONSE MECHANICAL LOCK OR QQ-P-35 FED SPEC 2ND TREATMENT RESPONSE MECHANICAL LOCK |
| STDC | Surface Treatment Document And Classification | QQ-P-416,TYPE 2,CLASS 2 FED SPEC ALL TREATMENT RESPONSES SLEEVE |
| SFTT | Surface Treatment | CADMIUM MECHANICAL LOCK AND CHROMATE MECHANICAL LOCK OR PASSIVATE MECHANICAL LOCK |
| SFTT | Surface Treatment | CADMIUM SLEEVE AND CHROMATE SLEEVE |
| SFTT | Surface Treatment | CADMIUM STEM |
Back to TopBack to Top
