Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
AN6228PC19 | 2 - Definitive Specification or Standard Document | 2 - Production Item | AERONAUTICAL STANDARDS GROUP | 88044 | ![]() |
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
53 | 5330 | 002022879 | A032A0 | 13706 | X | 1 | A | P | U | 1 Jan 1963 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZR01 | 1 Jul 1997 |
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
6 | KZ | 0 | 13 Nov 1969 |
An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
Defense Supply Center Philadelphia, Philadelphia, PA 19101
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
P | 596 | Z | 9 | A | V | Z | W | 194120 | Z | 95100 | WASHERS-GASKETS-PCKG-DVCS-NOI | 1 |
77.5
Gaskets, (machinery and parts), (less than 35 feet)
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
No special handling required.
Variable Rating
A Variation Exists. NMFC and UFCC Do Not Match. Activity needs to determine which of these descriptions apply.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
CRMK | Angle | 90.0 DEGREES MINIMUM AND 92.0 DEGREES MAXIMUM |
ADYT | Center Hole Diameter | 0.940 INCHES MINIMUM AND 0.942 INCHES MAXIMUM |
AAGR | Cross-Sectional Shape Style | U |
ADVN | Cross-Sectional Height | 0.235 INCHES MINIMUM AND 0.245 INCHES MAXIMUM |
MDCL | Material Document And Classification | QQ-A-353 FED SPEC 1ST MATERIAL RESPONSE OVERALL OR WW-T-789 FED SPEC 2ND MATERIAL RESPONSE OVERALL OR QQ-A-225/8 FED SPEC 2ND MATERIAL RESPONSE OVERALL OR WW-T-789 FED SPEC 3RD MATERIAL RESPONSE OVERALL |
MATT | Material | ALUMINUM OVERALL OR ALUMINUM ALLOY 6061 OVERALL OR ALUMINUM ALLOY 6062 OVERALL OR COPPER OVERALL |
ADYU | Peripheral Diameter | 1.433 INCHES MINIMUM AND 1.435 INCHES MAXIMUM |
STDC | Surface Treatment Document And Classification | QQ-A-696 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
SFTT | Surface Treatment | ANODIZE OVERALL |