Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
513202 | 3 - Design Control Reference | 2 - Production Item | HONEYWELL INTERNATIONAL INC | 64547 | |
513202 | 5 - Replaced / Discontinued | 9 - No Longer Used | HONEYWELL INTERNATIONAL INC. | 70210 | |
513202 | 5 - Replaced / Discontinued | 9 - No Longer Used | ALLIEDSIGNAL INC | 72599 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
53 | 5340 | 000234191 | A042A0 | 16900 | X | K | A | P | U | 1 Jan 1963 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive - Reference Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZR01 | 1 Apr 1991 |
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 2 | 5 | 9Z | 513202 | 64547 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
DLIS-K, Battle Creek, MI 49037-3084
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
6 | KZ | 0 | 20 Jun 1974 |
An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
Defense Supply Center Philadelphia, Philadelphia, PA 19101
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
J | 713 | Z | 9 | A | B | Z | J | 013120 | F | 05380 | ALUMINUM-ARTICLE-NOI-SUB-6 | 1 |
100.2
Metal Hardware
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
No special handling required.
A Variation Exists. NMFC and UFCC Do Not Match. Activity needs to determine which of these descriptions apply.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
CSSQ | First Leg Angle | 90.0 DEGREES NOMINAL |
AKAU | First Leg Hole Arrangement Style | TWO HOLES |
AHLK | First Leg Hole Diameter | 0.148 INCHES NOMINAL |
AHQU | First Leg Distance Between Hole Centers Along Width | 0.315 INCHES NOMINAL |
AHRB | First Leg Distance From Edge To Hole Center Along Length | 0.230 INCHES NOMINAL |
AHRA | First Leg Distance From Edge To Hole Center Along Width | 0.155 INCHES NOMINAL |
AJZU | First Leg Style | SQUARE |
AHPW | First Leg Thickness | 0.040 INCHES NOMINAL |
AHQN | First Leg Width | 0.830 INCHES NOMINAL |
ADLK | First Leg Length | 0.580 INCHES NOMINAL |
MATT | Material | ALUMINUM ALLOY |
AHLG | Second Leg Corner Radius | 0.120 INCHES NOMINAL |
AHLT | Second Leg Distance Between First And Second Hole Centers Along Width | 0.460 INCHES NOMINAL |
AHLS | Second Leg Distance Between Hole Centers Along Length | 0.400 INCHES NOMINAL |
AKCU | Second Leg Hole Arrangement Style | FOUR HOLES |
AHLN | Second Leg Hole Diameter | 0.140 INCHES NOMINAL |
AHLR | Second Leg Distance Between Lower Hole Centers Along Width | 0.320 INCHES NOMINAL |
AHLQ | Second Leg Distance Between Upper Hole Centers Along Width | 1.317 INCHES NOMINAL |
AHLW | Second Leg Distance From Edge To Hole Center Along Length | 0.170 INCHES NOMINAL |
AHLV | Second Leg Distance From Edge To Hole Center Along Width | 0.160 INCHES NOMINAL |
CSSP | Second Leg Relationship To First Leg | NOT IDENTICAL |
AKBU | Second Leg Style | CORNER RADIUS |
AHPX | Second Leg Thickness | 0.040 INCHES NOMINAL |
AHLF | Second Leg Width | 0.830 INCHES NOMINAL |
ADLL | Second Leg Length | 1.830 INCHES NOMINAL |
STYL | Style Designator | ANGLE |
SFTT | Surface Treatment | OXIDE FILM |