Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
240243 | 3 - Design Control Reference | 2 - Production Item | UNITED TECHNOLOGIES CORPORATION | 77445 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
53 | 5340 | 000316462 | A042A0 | 20354 | X | M | 3 | A | P | U | 1 Jan 1963 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Partial Descriptive - Reference Item Identification (Type 1A Concept)
An approved item name and FIIG exist but the item involved is so unique in design that it cannot be fully described in accordance with the FIIG.
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZU01 | 1 Apr 1991 |
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
4 | 3 | 2 | A | KZ | D | 240243 | 77445 |
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by an engineering drawing and the drawing is available for unlimited use. The drawing will be furnished by the activity identified by the RNAAC upon request.
Defense Supply Center Philadelphia, Philadelphia, PA 19101
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
2 | GP | 0 | 21 Oct 1975 |
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
Naval Inventory Control Point, Philadelphia, PA 19111-5098
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No Variation. NMFC and UFCC Match.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AHPZ | Center Section Height | 2.503 INCHES NOMINAL |
AHQB | Center Section Thickness | 0.087 INCHES MINIMUM AND 0.099 INCHES MAXIMUM |
CSSQ | First Leg Angle | 90.0 DEGREES NOMINAL |
AHQP | First Leg Corner Radius | 0.297 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
AHRA | First Leg Distance From Edge To Hole Center Along Width | 0.297 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
AKAU | First Leg Hole Arrangement Style | TWO HOLES |
AHLK | First Leg Hole Diameter | 0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
AHQU | First Leg Distance Between Hole Centers Along Width | 3.003 INCHES NOMINAL |
AHRB | First Leg Distance From Edge To Hole Center Along Length | 0.297 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
AHPW | First Leg Thickness | 0.087 INCHES MINIMUM AND 0.099 INCHES MAXIMUM |
AHQN | First Leg Width | 3.627 INCHES NOMINAL |
ADLK | First Leg Length | 0.855 INCHES NOMINAL |
MDCL | Material Document And Classification | SAE4130 ASSN STD 1ST MATERIAL RESPONSE OR ASAE8630 ASSN STD 2ND MATERIAL RESPONSE |
MATT | Material | STEEL COMP 4130 OR STEEL COMP 8630 |
ACHY | Mounting Hole Type | PLAIN |
CSSR | Second Leg Angle | 90.0 DEGREES NOMINAL |
AHLV | Second Leg Distance From Edge To Hole Center Along Width | 0.640 INCHES MINIMUM AND 0.660 INCHES MAXIMUM |
AJFQ | Second Leg End Radius | 0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
AKCU | Second Leg Hole Arrangement Style | ONE HOLE |
AHLN | Second Leg Hole Diameter | 0.448 INCHES MINIMUM AND 0.458 INCHES MAXIMUM |
AHLW | Second Leg Distance From Edge To Hole Center Along Length | 0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
CSSP | Second Leg Relationship To First Leg | NOT IDENTICAL |
AKBU | Second Leg Style | END RADIUS AND TAPERED |
AHPX | Second Leg Thickness | 0.087 INCHES MINIMUM AND 0.099 INCHES MAXIMUM |
ADLL | Second Leg Length | 1.131 INCHES NOMINAL |
FEAT | Special Features | HARDNESS ROCKWELL C32 TO C38 |
STYL | Style Designator | DOUBLE ANGLE |
STDC | Surface Treatment Document And Classification | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE |
SFTT | Surface Treatment | CADMIUM |