Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
A215670 | 3 - Design Control Reference | 2 - Production Item | U S ARMY TANK AUTOMOTIVE COMMAND | 19207 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
53 | 5340 | 000396180 | A042A0 | 16900 | X | 1 | A | P | U | 1 Jan 1963 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZU01 | 1 Apr 1991 |
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 3 | 2 | 5 | CT | D | A215670 | 19207 |
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
U.S. Army Aviation and Missile Command (AIR) Redstone Arsenal, AL 35898-5230
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
6 | KZ | 0 | 8 Dec 1977 |
An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
Defense Supply Center Philadelphia, Philadelphia, PA 19101
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Q | 581 | Z | 9 | A | V | Z | Q | 018400 | X | 08480 | AUTO-BRAKES-SHOES-R-PADS-ETC | 1 |
70
Automobile Parts, New
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
No special handling required.
A Variation Exists. NMFC and UFCC Do Not Match. Activity needs to determine which of these descriptions apply.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
MATT | Material | STEEL COMP 1020 |
MDCL | Material Document And Classification | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE |
STYL | Style Designator | ANGLE |
ADLK | First Leg Length | 2.500 INCHES NOMINAL |
ADLL | Second Leg Length | 1.750 INCHES NOMINAL |
AHPW | First Leg Thickness | 0.250 INCHES NOMINAL |
AHPX | Second Leg Thickness | 0.250 INCHES NOMINAL |
CSSQ | First Leg Angle | 90.0 DEGREES NOMINAL |
AJZU | First Leg Style | SQUARE |
AHQN | First Leg Width | 1.000 INCHES NOMINAL |
AHLF | Second Leg Width | 1.000 INCHES NOMINAL |
AKAU | First Leg Hole Arrangement Style | TWO HOLES |
AHLK | First Leg Hole Diameter | 0.406 INCHES NOMINAL |
AHQX | First Leg Distance Between Hole Centers Along Length | 1.000 INCHES NOMINAL |
AHRA | First Leg Distance From Edge To Hole Center Along Width | 0.500 INCHES NOMINAL |
AHRB | First Leg Distance From Edge To Hole Center Along Length | 0.500 INCHES NOMINAL |
AHLN | Second Leg Hole Diameter | 0.375 INCHES NOMINAL |
AHLV | Second Leg Distance From Edge To Hole Center Along Width | 0.500 INCHES NOMINAL |
AHLW | Second Leg Distance From Edge To Hole Center Along Length | 0.500 INCHES NOMINAL |
CSSP | Second Leg Relationship To First Leg | NOT IDENTICAL |
AKBU | Second Leg Style | SQUARE |
AKCU | Second Leg Hole Arrangement Style | ONE HOLE |
FEAT | Special Features | SECOND END HOLE 3/8 IN. 16 THDS PER IN. |