Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
47-682-209-5 | 3 - Design Control Reference | 2 - Production Item | BELL HELICOPTER TEXTRON INC. | 97499 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
53 | 5340 | 000442948 | A042A0 | 16900 | X | K | A | P | U | 17 May 1968 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive - Reference Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZE01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
YW01 | 1 Jul 1994 |
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 3 | 2 | 5 | CT | D | 47-682-209-5 | 97499 |
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
U.S. Army Aviation and Missile Command (AIR) Redstone Arsenal, AL 35898-5230
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
2 | KZ | 0 | 22 Oct 1981 |
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
Defense Supply Center Philadelphia, Philadelphia, PA 19101
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
CT | J | 713 | Z | 9 | A | B | Z | J | 013120 | F | 05380 | ALUMINUM-ARTICLE-NOI-SUB-6 | 1 |
U.S. Army Aviation and Missile Command (AIR) Redstone Arsenal, AL 35898-5230
100.2
Metal Hardware
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
No special handling required.
A Variation Exists. NMFC and UFCC Do Not Match. Activity needs to determine which of these descriptions apply.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
CSSQ | First Leg Angle | 100.0 DEGREES NOMINAL |
AHRA | First Leg Distance From Edge To Hole Center Along Width | 1.175 INCHES NOMINAL |
AHQQ | First Leg End Width | 1.650 INCHES NOMINAL |
AKAU | First Leg Hole Arrangement Style | ONE HOLE |
AHLK | First Leg Hole Diameter | 0.190 INCHES MINIMUM AND 0.196 INCHES MAXIMUM |
AHRB | First Leg Distance From Edge To Hole Center Along Length | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
AJZU | First Leg Style | SQUARE AND TAPERED |
AHPW | First Leg Thickness | 0.050 INCHES NOMINAL |
AHQN | First Leg Width | 2.320 INCHES MINIMUM AND 2.380 INCHES MAXIMUM |
ADLK | First Leg Length | 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
HEAT | Heat Treatment | T-3 SOLUTION HEAT TREATED |
MDCL | Material Document And Classification | QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE |
MATT | Material | ALUMINUM ALLOY 2024 |
AHLH | Second Leg End Width | 1.650 INCHES NOMINAL |
AKCU | Second Leg Hole Arrangement Style | NO HOLE |
CSSP | Second Leg Relationship To First Leg | NOT IDENTICAL |
AKBU | Second Leg Style | SQUARE AND TAPERED |
AHPX | Second Leg Thickness | 0.050 INCHES NOMINAL |
AHLF | Second Leg Width | 2.320 INCHES MINIMUM AND 2.380 INCHES MAXIMUM |
ADLL | Second Leg Length | 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
STYL | Style Designator | ANGLE |
STDC | Surface Treatment Document And Classification | 4001 FSCM 97499 MFR REF SINGLE TREATMENT RESPONSE |
SFTT | Surface Treatment | ANODIZE |