Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
121873-1 | 3 - Design Control Reference | 2 - Production Item | DATACARD CORPORATION | 49033 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
53 | 5340 | 000643678 | A042A0 | 20354 | X | 1 | A | P | U | 29 Jun 1967 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
G070 | 0 | 0 | C | 1 Apr 1991 |
Not Established
SERVICE/AGENCY-MANAGED (Service/Agency use only.) Issue, transfer, or shipment is not subject to specialized controls other than those imposed by individual Services supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with Service requisitioning procedures.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
6 | KZ | 0 | 12 Nov 1969 |
An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
Defense Supply Center Philadelphia, Philadelphia, PA 19101
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No Variation. NMFC and UFCC Match.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
MATT | Material | STEEL |
STYL | Style Designator | DOUBLE ANGLE |
ADLK | First Leg Length | 1.125 INCHES NOMINAL |
ADLL | Second Leg Length | 0.750 INCHES NOMINAL |
AHPW | First Leg Thickness | 0.125 INCHES NOMINAL |
AHPX | Second Leg Thickness | 0.125 INCHES NOMINAL |
AHPZ | Center Section Height | 0.880 INCHES NOMINAL |
AHQA | Center Section Width | 0.500 INCHES NOMINAL |
AHQB | Center Section Thickness | 0.125 INCHES NOMINAL |
CSSQ | First Leg Angle | 90.0 DEGREES NOMINAL |
CSSR | Second Leg Angle | 90.0 DEGREES NOMINAL |
AJZU | First Leg Style | SQUARE |
AHQN | First Leg Width | 0.500 INCHES NOMINAL |
AHLF | Second Leg Width | 0.500 INCHES NOMINAL |
AKAU | First Leg Hole Arrangement Style | NO HOLE |
AHLK | First Leg Hole Diameter | 0.196 INCHES NOMINAL |
AHQX | First Leg Distance Between Hole Centers Along Length | 0.500 INCHES NOMINAL |
AHRA | First Leg Distance From Edge To Hole Center Along Width | 0.250 INCHES NOMINAL |
AHRB | First Leg Distance From Edge To Hole Center Along Length | 0.125 INCHES NOMINAL |
AHLN | Second Leg Hole Diameter | 0.196 INCHES NOMINAL |
AHLS | Second Leg Distance Between Hole Centers Along Length | 0.500 INCHES NOMINAL |
AHLV | Second Leg Distance From Edge To Hole Center Along Width | 0.250 INCHES NOMINAL |
AHLW | Second Leg Distance From Edge To Hole Center Along Length | 0.125 INCHES NOMINAL |
CSSP | Second Leg Relationship To First Leg | IDENTICAL |
AKBU | Second Leg Style | SQUARE |
AKCU | Second Leg Hole Arrangement Style | TWO HOLES |