Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
11608021 | 3 - Design Control Reference | 2 - Production Item | U S ARMY TANK AUTOMOTIVE COMMAND | 19207 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
53 | 5340 | 001682802 | A042A0 | 20354 | X | M | 3 | A | P | U | 26 Jul 1968 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Partial Descriptive - Reference Item Identification (Type 1A Concept)
An approved item name and FIIG exist but the item involved is so unique in design that it cannot be fully described in accordance with the FIIG.
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
YJ01 | 1 Apr 1991 |
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 3 | 2 | 1 | AZ | D | 11608021 | 19207 | ![]() |
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
U.S. Army Tank-Automotive and Armaments, Command, Warren, MI 48397-5000
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
6 | KZ | 0 | 16 May 1971 |
An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
Defense Supply Center Philadelphia, Philadelphia, PA 19101
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
AZ | J | 576 | Z | 9 | A | A | Z | J | 013120 | F | 05380 | ALUMINUM-ARTICLE-NOI-SUB-6 | 1 |
U.S. Army Tank-Automotive and Armaments, Command, Warren, MI 48397-5000
100.2
Metal and Metal Products, (less than 35 feet)
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft instruments and laboratory test equipment, aerial targets and gliders, aircraft/missile technical order compliance kits, etc
No special handling required.
A Variation Exists. NMFC and UFCC Do Not Match. Activity needs to determine which of these descriptions apply.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AHPZ | Center Section Height | 4.500 INCHES NOMINAL |
AHQB | Center Section Thickness | 2.500 INCHES NOMINAL |
AHQA | Center Section Width | 8.690 INCHES NOMINAL |
AARN | Fabrication Method | STAMPED |
CSSQ | First Leg Angle | 90.0 DEGREES NOMINAL |
AHRA | First Leg Distance From Edge To Hole Center Along Width | 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
AHQQ | First Leg End Width | 2.000 INCHES NOMINAL |
AKAU | First Leg Hole Arrangement Style | FOUR HOLES |
AHLK | First Leg Hole Diameter | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
AHQX | First Leg Distance Between Hole Centers Along Length | 1.000 INCHES NOMINAL |
AHQU | First Leg Distance Between Hole Centers Along Width | 2.000 INCHES NOMINAL |
AHRB | First Leg Distance From Edge To Hole Center Along Length | 0.370 INCHES NOMINAL |
AJZU | First Leg Style | SQUARE AND TAPERED |
AHPW | First Leg Thickness | 0.250 INCHES NOMINAL |
ADLK | First Leg Length | 3.250 INCHES NOMINAL |
AHQN | First Leg Width | 8.690 INCHES NOMINAL |
MDCL | Material Document And Classification | QQ-A-250/11,0 FED SPEC SINGLE MATERIAL RESPONSE |
MATT | Material | ALUMINUM ALLOY 6061 |
ACHY | Mounting Hole Type | THREADED |
CSSR | Second Leg Angle | 45.0 DEGREES NOMINAL |
AHLV | Second Leg Distance From Edge To Hole Center Along Width | 0.440 INCHES NOMINAL |
AHLH | Second Leg End Width | 6.000 INCHES NOMINAL |
AKCU | Second Leg Hole Arrangement Style | TWO HOLES |
AHLN | Second Leg Hole Diameter | 0.320 INCHES MINIMUM AND 0.360 INCHES MAXIMUM |
AHLS | Second Leg Distance Between Hole Centers Along Length | 1.500 NOMINAL INCHES |
AHLP | Second Leg Distance Between Hole Centers Along Width | 5.120 INCHES NOMINAL |
AHLW | Second Leg Distance From Edge To Hole Center Along Length | 2.000 INCHES NOMINAL |
ADLL | Second Leg Length | 7.125 INCHES NOMINAL |
CSSP | Second Leg Relationship To First Leg | NOT IDENTICAL |
AKBU | Second Leg Style | ANGLE |
AHPX | Second Leg Thickness | 0.250 INCHES NOMINAL |
STYL | Style Designator | DOUBLE ANGLE |