- FSG 53 - Hardware and Abrasives
- FSC 5340 - Hardware, Commercial
- NSN 5340-00-483-9516
5340-00-483-9516
BRACKET,ANGLE
5340-00-483-9516 (5340004839516, 004839516)
Part Number (1 listing): LS5998C6-8
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| LS5998C6-8 | 3 - Design Control Reference | 2 - Production Item | LOCKHEED MARTIN CORPORATION | 98897 |  |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 53 | 5340 | 004839516 | A042A0 | 16900 | X | K | A | P | U | 28 May 1969 |
A042A0
Federal Item Identification Guide (FIIG_4065)
16900
Item Naming Code (INC_4080)
28 May 1969
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
K
Type of Item Identification (TYP_II_4820)
Full Descriptive - Reference Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
P
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZC01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 3 | 2 | 4 | SE | D | LS5998C6-8 | 98897 | | ||||
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
4
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
SE
Reference Number Action Activity Code (RNAAC_2900)
San Antonio Air Logistics Center, Kelly AFB, TX 78241-5000
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 2 | KZ | 0 | 22 Oct 1981 |
2
Item Standardization Code (ISC_2650)
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
KZ
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
22 Oct 1981
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SG |
SG
Originating Activity Code (ORIG_ACTY_CD_4210)
403 SCMS/GUED, 5215 Thurlow St, Suite 5, Bldg 70C Wright-Patterson AFB OH 45433
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| CSSQ | First Leg Angle | 90.0 DEGREES NOMINAL |
| AHLK | First Leg Hole Diameter | 0.218 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| ADLK | First Leg Length | 0.625 INCHES MINIMUM AND 0.745 INCHES MAXIMUM |
| AHRB | First Leg Distance From Edge To Hole Center Along Length | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| AHRA | First Leg Distance From Edge To Hole Center Along Width | 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| AHQQ | First Leg End Width | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AKAU | First Leg Hole Arrangement Style | ONE HOLE |
| AJZU | First Leg Style | SQUARE AND TAPERED |
| AHPW | First Leg Thickness | 0.040 INCHES NOMINAL |
| AHQN | First Leg Width | 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| HEAT | Heat Treatment | FULL HARD |
| MDCL | Material Document And Classification | MIL-S-5059,TYPE 301,1/2 HARD MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | Material | STEEL |
| AHLW | Second Leg Distance From Edge To Hole Center Along Length | 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| AHLV | Second Leg Distance From Edge To Hole Center Along Width | 0.150 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| AHLP | Second Leg Distance Between Hole Centers Along Width | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| CSSP | Second Leg Relationship To First Leg | NOT IDENTICAL |
| AKBU | Second Leg Style | SQUARE AND TAPERED |
| AHPX | Second Leg Thickness | 0.040 INCHES NOMINAL |
| AHLH | Second Leg End Width | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AKCU | Second Leg Hole Arrangement Style | TWO HOLES |
| AHLN | Second Leg Hole Diameter | 0.135 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| ADLL | Second Leg Length | 0.750 INCHES MINIMUM AND 0.870 INCHES MAXIMUM |
| AHLF | Second Leg Width | 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| STYL | Style Designator | ANGLE |
Back to TopBack to Top
