Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
412509 | 3 - Design Control Reference | 2 - Production Item | RAYTHEON COMPANY | 82577 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
53 | 5340 | 005354232 | A042A0 | 16900 | X | 4 | 6 | A | P | A | 0 | 1 Jan 1963 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Partial Descriptive Item Identification (Type 1 Concept)
An approved item name and FIIG may exist, but it has previously been established and documented that industry refuses to provide the technical data sufficient for preparation on a full descriptive method item identification based on policy, restricted or proprietary data rights, nonexistence of technical data, etc.
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Item does not contain Precious Metal.
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZU01 | 1 Apr 1991 |
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
2 | TU | 0 | 22 Sep 1970 |
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
AF Cataloging Agent DLIS-K, Battle Creek, MI 49037-3094
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
576 | Z | 9 | A | B | Z | S | 013140 | X | 05390 | ALUMINUM-ANGLES |
Metal and Metal Products, (less than 35 feet)
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Construction materials: Includes paint and related materials, prefabricated building, wood products, metal and composition materials and their products, commercial hardware and miscellaneous items, cement, asphalt, building maintenance materials.
No special handling required.
60
No Variation. NMFC and UFCC Match.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AHRB | First Leg Distance From Edge To Hole Center Along Length | 0.375 INCHES NOMINAL |
AHRA | First Leg Distance From Edge To Hole Center Along Width | 0.310 INCHES NOMINAL |
CSSQ | First Leg Angle | 90.0 DEGREES NOMINAL |
ADLK | First Leg Length | 0.875 INCHES NOMINAL |
AHPW | First Leg Thickness | 0.094 INCHES NOMINAL |
AHLK | First Leg Hole Diameter | 0.169 INCHES MINIMUM AND 0.177 INCHES MAXIMUM |
AHQN | First Leg Width | 14.690 INCHES NOMINAL |
MATT | Material | ALUMINUM ALLOY |
ACHY | Mounting Hole Type | COUNTERSUNK AND PLAIN |
AHLW | Second Leg Distance From Edge To Hole Center Along Length | 0.219 INCHES NOMINAL |
ADLL | Second Leg Length | 0.875 INCHES NOMINAL |
CSSP | Second Leg Relationship To First Leg | NOT IDENTICAL |
AHLN | Second Leg Hole Diameter | 0.145 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
AHPX | Second Leg Thickness | 0.094 INCHES NOMINAL |
AHLF | Second Leg Width | 14.690 INCHES NOMINAL |
FEAT | Special Features | ONE LEG C/O FIVE HOLES,OTHER LEG C/O TWELVE HOLES |
STYL | Style Designator | ANGLE |