- FSG 53 - Hardware and Abrasives
- FSC 5340 - Hardware, Commercial
- NSN 5340-00-935-8813
5340-00-935-8813
BRACKET,ANGLE
5340-00-935-8813 (5340009358813, 009358813)
Part Number (1 listing): AN743Z13R
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| AN743Z13R | 2 - Definitive Specification or Standard Document | 2 - Production Item | AERONAUTICAL STANDARDS GROUP | 88044 |  |
2 - Definitive Specification or Standard Document
Reference Number Category Code (DRN_2910)
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 53 | 5340 | 009358813 | A042A0 | 16900 | X | 1 | A | P | U | 10 Apr 1968 |
A042A0
Federal Item Identification Guide (FIIG_4065)
16900
Item Naming Code (INC_4080)
10 Apr 1968
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
P
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| WP | ||||||||||||||||||||||||||||||
| ZE | ||||||||||||||||||||||||||||||
| ZW | ||||||||||||||||||||||||||||||
| ZZ | ||||||||||||||||||||||||||||||
| ZE01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| FXGI | 1 | G | Z | SX | 1 Sep 2005 | |||||||||||||||||||||||||
| N9BZ | 1 | G | Z | GH | KE | 1 Sep 2005 | ||||||||||||||||||||||||
| WP01 | 1 Nov 2006 | |||||||||||||||||||||||||||||
| ZW01 | 1 Sep 2009 | |||||||||||||||||||||||||||||
| YD01 | 1 Oct 2016 | |||||||||||||||||||||||||||||
1
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
G
Acquisition Method Suffix Code (AMSC_2876)
The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
SX
Item Management Coding Activity (IMC_ACTY_2748)
Oklahoma City Air Logistics Center, Tinker AFB, OK 73145-3043
GH
Item Management Coding Activity (IMC_ACTY_2748)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
KE Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval ICP, Philadelphia, PA 19111
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 2 | 2 | 4 | SE | D | AN743Z13R | 88044 | | ||||
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
2
Reference Number Category Code (RNCC_2910)
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
4
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
SE
Reference Number Action Activity Code (RNAAC_2900)
San Antonio Air Logistics Center, Kelly AFB, TX 78241-5000
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| KZ | 576 | Z | 9 | A | A | Z | J | 013120 | F | 05380 | ALUMINUM-ARTICLE-NOI-SUB-6 |
KZ
Originating Activity Code (ORIG_ACTY_CD_4210)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
576
Water Commodity Code (WRT_CMDTY_CD_9275)
Metal and Metal Products, (less than 35 feet)
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
A
Air Commodity Code (AIR_CMTY_HDLG_9215)
Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft instruments and laboratory test equipment, aerial targets and gliders, aircraft/missile technical order compliance kits, etc
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
J
Less Than Truckload (CLAS_RTNG_CD_2770)
100.2
013120
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
F
NMFC Sub Item Number (SUB_ITM_NBR_0861)
05380
Uniform Freight Classification (UFC_CD_MODF_3040)
ALUMINUM-ARTICLE-NOI-SUB-6
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
J
Acquisition Advice Code (AAC_2507)
NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
N
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DF
Service / Agency Code (MOE_CD_2833)
Department of the Air Force
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AHRB | First Leg Distance From Edge To Hole Center Along Length | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHRA | First Leg Distance From Edge To Hole Center Along Width | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AJFP | First Leg End Radius | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| CSSQ | First Leg Angle | 90.0 DEGREES NOMINAL |
| AJZU | First Leg Style | END RADIUS |
| AHPW | First Leg Thickness | 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| AKAU | First Leg Hole Arrangement Style | ONE HOLE |
| AHLK | First Leg Hole Diameter | 0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM |
| ADLK | First Leg Length | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| AHQN | First Leg Width | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| MDCL | Material Document And Classification | QQ-A-250/5,ALCLAD T3 FED SPEC SINGLE MATERIAL RESPONSE |
| MATT | Material | ALUMINUM ALLOY 2024 |
| AHLG | Second Leg Corner Radius | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHLS | Second Leg Distance Between Hole Centers Along Length | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AHLV | Second Leg Distance From Edge To Hole Center Along Width | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AKCU | Second Leg Hole Arrangement Style | TWO HOLES |
| AHLN | Second Leg Hole Diameter | 0.118 INCHES MINIMUM AND 0.138 INCHES MAXIMUM |
| AHLW | Second Leg Distance From Edge To Hole Center Along Length | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| CSSP | Second Leg Relationship To First Leg | NOT IDENTICAL |
| AKBU | Second Leg Style | CORNER RADIUS |
| AHPX | Second Leg Thickness | 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| AHLF | Second Leg Width | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| ADLL | Second Leg Length | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| STYL | Style Designator | ANGLE |
| STDC | Surface Treatment Document And Classification | MIL-A-8625,TY 1 OR TY 2 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT | Surface Treatment | ANODIZE |
Back to TopBack to Top
