- FSG 53 - Hardware and Abrasives
- FSC 5340 - Hardware, Commercial
- NSN 5340-00-937-3139
5340-00-937-3139
BRACKET,ANGLE
5340-00-937-3139 (5340009373139, 009373139)
Part Number (1 listing): 10210415
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 10210415 | 3 - Design Control Reference | 2 - Production Item | U S ARMY AVIATION AND MISSILE | 18876 |  |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 53 | 5340 | 009373139 | A042A0 | 16900 | X | K | A | P | A | 0 | 7 Dec 1966 |
A042A0
Federal Item Identification Guide (FIIG_4065)
16900
Item Naming Code (INC_4080)
7 Dec 1966
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
K
Type of Item Identification (TYP_II_4820)
Full Descriptive - Reference Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
P
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
0
ADPE Identification Code (ADPEC_0801)
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZS01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZU01 | 1 Aug 1995 | |||||||||||||||||||||||||||||
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 3 | 2 | 1 | BD | D | 10210415 | 18876 | | ||||
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
1
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
BD
Reference Number Action Activity Code (RNAAC_2900)
U.S. Army Aviation and Missile Command, Redstone Arsenal, AL 35898-5230
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 2 | KZ | 0 | 10 Sep 1981 |
2
Item Standardization Code (ISC_2650)
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
KZ
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
10 Sep 1981
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| BD |
BD
Originating Activity Code (ORIG_ACTY_CD_4210)
U.S. Army Aviation and Missile Command, Redstone Arsenal, AL 35898-5230
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| CSSQ | First Leg Angle | 90.0 DEGREES NOMINAL |
| AHQX | First Leg Distance Between Hole Centers Along Length | 0.360 INCHES NOMINAL |
| AKAU | First Leg Hole Arrangement Style | TWO HOLES |
| AHLK | First Leg Hole Diameter | 0.157 INCHES MINIMUM AND 0.164 INCHES MAXIMUM |
| AHRB | First Leg Distance From Edge To Hole Center Along Length | 0.170 INCHES NOMINAL |
| AHRA | First Leg Distance From Edge To Hole Center Along Width | 0.400 INCHES NOMINAL |
| AHQN | First Leg Width | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
| ADLK | First Leg Length | 1.100 INCHES MINIMUM AND 1.140 INCHES MAXIMUM |
| AJZU | First Leg Style | SQUARE |
| AHPW | First Leg Thickness | 0.038 INCHES MINIMUM AND 0.058 INCHES MAXIMUM |
| MDCL | Material Document And Classification | ASTM A109 ASSN STD 1ST MATERIAL RESPONSE OR ASTM A611 ASSN STD 2ND MATERIAL RESPONSE OR ASTM A635 ASSN STD 3RD MATERIAL RESPONSE |
| MATT | Material | STEEL COMP 1008 OR STEEL COMP 1009 OR STEEL COMP 1015 OR STEEL COMP 1018 OR STEEL COMP 1020 |
| AHLW | Second Leg Distance From Edge To Hole Center Along Length | 0.170 INCHES NOMINAL |
| AHLV | Second Leg Distance From Edge To Hole Center Along Width | 0.400 INCHES NOMINAL |
| AHLS | Second Leg Distance Between Hole Centers Along Length | 0.480 INCHES NOMINAL |
| ADLL | Second Leg Length | 0.800 INCHES MINIMUM AND 0.840 INCHES MAXIMUM |
| CSSP | Second Leg Relationship To First Leg | NOT IDENTICAL |
| AKCU | Second Leg Hole Arrangement Style | TWO HOLES |
| AHLN | Second Leg Hole Diameter | 0.435 INCHES MINIMUM AND 0.443 INCHES MAXIMUM |
| AKBU | Second Leg Style | SQUARE |
| AHPX | Second Leg Thickness | 0.038 INCHES MINIMUM AND 0.058 INCHES MAXIMUM |
| AHLF | Second Leg Width | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
| STYL | Style Designator | ANGLE |
| STDC | Surface Treatment Document And Classification | QQ-P-416,TY 2,CL2 FED SPEC ALL TREATMENT RESPONSES |
| SFTT | Surface Treatment | CADMIUM AND CHROMATE |
Back to TopBack to Top
