Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
B5100 | 3 - Design Control Reference | 1 - Incomplete Part Number | LOCKWOOD HARDWARE MFG CO | 01096 | |
B5100 | 3 - Design Control Reference | 1 - Incomplete Part Number | LOCKWOOD HARDWARE MFG CO | 01096 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
53 | 5340 | 009643948 | A10600 | 06701 | X | 4 | 3 | A | P | U | 0 | 1 Jan 1963 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Partial Descriptive Item Identification (Type 1 Concept)
An approved item name and FIIG exist but the item involved is so unique in design that it cannot be fully described in accordance with the FIIG.
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Precious Metal Content is unknown.
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
6 | KZ | 6 | 29 Jun 1974 |
An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
Defense Supply Center Philadelphia, Philadelphia, PA 19101
Item is inactive (no recorded Primary/Secondary Inventory Control Activity (PICA/SICA)). File data coded KFD is forwarded.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
No Variation. NMFC and UFCC Match.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
BTJY | Bolt Type | REVERSE BEVEL |
APGF | Design Type | LATCH BOLT |
ASBH | Face Shape | BEVELED |
CBBL | Features Provided | KNOB HANDLE AND KEY PLATE AND SPINDLE AND STRIKE AND ROSE AND TURN KNOB AND SCREW |
HGTH | Height | 6.000 INCHES NOMINAL |
APHE | Operation Method | KEY WHEN STOP IS SET LATCH BOLT AND INSIDE TURN KNOB LATCH BOLT |
MATT | Material | COPPER ALLOY KNOB |
MATT | Material | IRON CASE |
CHMF | Knob Shape | ROUND |
ASSK | Knob Quantity | 2 |
ABRY | Length | 8.000 INCHES NOMINAL |
CHLZ | Locking Mechanism Type | PIN TUMBLER |
SHPE | Shape | RECTANGULAR CASE |
FEAT | Special Features | IWHEN DOOR IS CLOSED AUXILIARY BOLT DEAD LOCKS LATCH BOLT AGAINST END PRESSURE;CASE THICKNESS:0.875 IN THK;OUTSIDE SPACING,KNOB HUB CENTER TO CYLINDER CENTER:4.000;OPERATING METHOD:KNOB WHEN STOP IS SET |
ABGL | Width | 1.250 INCHES NOMINAL |
SFTT | Surface Treatment | COPPER ALLOY KNOB |
SFTT | Surface Treatment | ENAMEL BAKED CASE |
ABNM | Thickness | 1.375 INCHES NOMINAL OVERALL |
ABNM | Thickness | 2.750 INCHES NOMINAL BACKSET |
ABNM | Thickness | 4.000 INCHES NOMINAL CASE |