- FSG 53 - Hardware and Abrasives
- FSC 5340 - Hardware, Commercial
- NSN 5340-01-066-7577
5340-01-066-7577
BRACKET,DOUBLE ANGLE
5340-01-066-7577 (5340010667577, 010667577)
Part Number (1 listing): 11678451
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 11678451 | 3 - Design Control Reference | 2 - Production Item | U S ARMY TANK AUTOMOTIVE COMMAND | 19207 |  |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 53 | 5340 | 010667577 | A042A0 | 20354 | X | 1 | A | P | U | 18 Oct 1978 |
A042A0
Federal Item Identification Guide (FIIG_4065)
20354
Item Naming Code (INC_4080)
18 Oct 1978
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
P
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZP01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 3 | 2 | 1 | AZ | A | 11678451 | 19207 | | ||||
1
Reference Number Format Code (RNFC_2920)
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
1
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
AZ
Reference Number Action Activity Code (RNAAC_2900)
U.S. Army Tank-Automotive and Armaments, Command, Warren, MI 48397-5000
A
Reference Number Status Code (RNSC_2923)
Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 6 | KZ | 0 | 2 Jun 1988 |
6
Item Standardization Code (ISC_2650)
An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
KZ
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
2 Jun 1988
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AZ | Q | 713 | Z | 9 | A | V | Z | Q | 095190 | J | 49790 | HARDWARE--NOI-SUB-9 |
AZ
Originating Activity Code (ORIG_ACTY_CD_4210)
U.S. Army Tank-Automotive and Armaments, Command, Warren, MI 48397-5000
Q
Less Than Carload (LCL_CD_2760)
70
713
Water Commodity Code (WRT_CMDTY_CD_9275)
Metal Hardware
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
V
Air Commodity Code (AIR_CMTY_HDLG_9215)
Vehicles, machinery, shop and warehouse equipment and supplies, including special tools and equipment, ground servicing and special purpose vehicles, marine equipment and supplies, repair and maintenance parts for the above.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
095190
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
J
NMFC Sub Item Number (SUB_ITM_NBR_0861)
49790
Uniform Freight Classification (UFC_CD_MODF_3040)
HARDWARE--NOI-SUB-9
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AGAV | End Item Identification | CARRIER PERS FT M113A1 |
| AHPZ | Center Section Height | 2.750 INCHES NOMINAL |
| AHQB | Center Section Thickness | 0.250 INCHES NOMINAL |
| AHQA | Center Section Width | 1.500 INCHES NOMINAL |
| AHRB | First Leg Distance From Edge To Hole Center Along Length | 0.502 INCHES NOMINAL |
| AHRA | First Leg Distance From Edge To Hole Center Along Width | 0.500 INCHES NOMINAL |
| AKAU | First Leg Hole Arrangement Style | ONE HOLE |
| CSSQ | First Leg Angle | 90.0 DEGREES NOMINAL |
| ADLK | First Leg Length | 2.690 INCHES NOMINAL |
| AJZU | First Leg Style | SQUARE |
| AHPW | First Leg Thickness | 0.250 INCHES NOMINAL |
| AHLK | First Leg Hole Diameter | 0.500 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| AHQN | First Leg Width | 1.500 INCHES NOMINAL |
| MDCL | Material Document And Classification | QQ-S-741 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | Material | STEEL |
| CSSR | Second Leg Angle | 90.0 DEGREES NOMINAL |
| AHLS | Second Leg Distance Between Hole Centers Along Length | 0.314 NOMINAL INCHES |
| AHLP | Second Leg Distance Between Hole Centers Along Width | 0.812 INCHES NOMINAL |
| AKCU | Second Leg Hole Arrangement Style | TWO HOLES |
| AHLN | Second Leg Hole Diameter | 0.188 INCHES NOMINAL |
| AHLW | Second Leg Distance From Edge To Hole Center Along Length | 0.188 INCHES NOMINAL |
| AHLV | Second Leg Distance From Edge To Hole Center Along Width | 0.500 INCHES NOMINAL |
| AHPX | Second Leg Thickness | 0.250 INCHES NOMINAL |
| AHLF | Second Leg Width | 1.500 INCHES NOMINAL |
| ADLL | Second Leg Length | 2.690 INCHES NOMINAL |
| CSSP | Second Leg Relationship To First Leg | NOT IDENTICAL |
| AKBU | Second Leg Style | SQUARE |
| FEAT | Special Features | CENTER SECTION CONTAINS 2 HOLES,0.406 IN. MIN DIA,0.436 IN. MAX DIA,LOCATED 0.750 IN. FROM EACH END |
| STYL | Style Designator | ADJACENT ANGLES |
| STDC | Surface Treatment Document And Classification | TT-P-636 MIL SPEC SINGLE TREATMENT RESPONSE AND TT-L-529 MIL SPEC SINGLE TREATMENT RESPONSE |
| SFTT | Surface Treatment | PRIMER AND ENAMEL |
Back to TopBack to Top
