Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
4563087 | 3 - Design Control Reference | 2 - Production Item | WHIPPANY ACTUATION SYSTEMS LLC | 81039 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
53 | 5340 | 011357041 | A531C0 | 29785 | X | K | A | P | A | 0 | 29 Jul 1982 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive - Reference Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Item does not contain Precious Metal.
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZF01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZG01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZR01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZX01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZK01 | 1 Nov 2010 |
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 2 | A | KZ | 4563087 | 81039 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by an engineering drawing and the drawing is available for unlimited use. The drawing will be furnished by the activity identified by the RNAAC upon request.
Defense Supply Center Philadelphia, Philadelphia, PA 19101
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
5 | 97 | 0 | 29 Jul 1982 |
An item authorized for procurement that has not yet been subject to item standardization.
DLIS-LFF, Battle Creek, MI 49037-3084
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
BD |
U.S. Army Aviation and Missile Command, Redstone Arsenal, AL 35898-5230
No Variation. NMFC and UFCC Match.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
ADPC | Distance From First Hole Centerline To End Along Length | 1.535 INCHES NOMINAL |
ADPD | Distance From First Hole Centerline To End Along Width | 1.498 INCHES NOMINAL |
ADPR | Body Thickness | 0.065 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
ADNU | Corner Radius | 0.240 INCHES NOMINAL |
AAGR | Cross-Sectional Shape Style | CIRCULAR RECESS |
ADNY | Distance Between Holes Along Length | 2.520 INCHES NOMINAL |
ADNZ | Distance Between Holes Along Width | 2.441 INCHES NOMINAL |
ADPN | First Recess Inside Height | 0.245 INCHES NOMINAL |
ABKU | Flange Thickness | 0.065 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
AAUB | Hole Diameter | 0.181 INCHES NOMINAL |
ADNW | Hole Quantity Along Width | 4 |
ADNV | Hole Quantity Along Length | 4 |
MDCL | Material Document And Classification | QQ-S-698,COND N FED SPEC ALL MATERIAL RESPONSES |
MATT | Material | STEEL COMP 1010 |
ADQK | Mounting Opening Shape Style | UNTHREADED HOLE |
ADPQ | Inside Corner Radius | 0.080 INCHES NOMINAL |
AARX | Inside Diameter | 10.160 INCHES MINIMUM AND 10.180 INCHES MAXIMUM |
ABRY | Length | 10.630 INCHES NOMINAL |
ADQB | Securing Device Type | SLIDE FASTENER |
ABMW | Peripheral Shape Style | RECTANGLE, MULTI HOLES |
ABGL | Width | 10.320 INCHES NOMINAL |
STDC | Surface Treatment Document And Classification | QQ-P-416, TYPE 3, CLASS 2 FED SPEC ALL TREATMENT RESPONSES |
SFTT | Surface Treatment | CADMIUM |