- FSG 53 - Hardware and Abrasives
- FSC 5340 - Hardware, Commercial
- NSN 5340-01-152-7555
5340-01-152-7555
BRACKET,ANGLE
5340-01-152-7555 (5340011527555, 011527555)
Part Number (1 listing): L24046P02
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| L24046P02 | 3 - Design Control Reference | 2 - Production Item | GENERAL ELECTRIC COMPANY | 07482 |  |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 53 | 5340 | 011527555 | A042A0 | 16900 | X | 1 | A | P | U | 7 May 1983 |
A042A0
Federal Item Identification Guide (FIIG_4065)
16900
Item Naming Code (INC_4080)
7 May 1983
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
P
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZW01 | 1 Nov 1998 | |||||||||||||||||||||||||||||
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4 | 3 | 2 | 2 | 9Z | D | L24046P02 | 07482 | | ||||
4
Reference Number Format Code (RNFC_2920)
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
2
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the drawing.
9Z
Reference Number Action Activity Code (RNAAC_2900)
DLIS-K, Battle Creek, MI 49037-3084
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 5 | 97 | 0 | 7 May 1983 |
5
Item Standardization Code (ISC_2650)
An item authorized for procurement that has not yet been subject to item standardization.
97
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
DLIS-LFF, Battle Creek, MI 49037-3084
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
7 May 1983
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZG |
ZG
Originating Activity Code (ORIG_ACTY_CD_4210)
Germany
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| CSSQ | First Leg Angle | 0.230 RADIANS MINIMUM AND 0.270 RADIANS MAXIMUM |
| AHQP | First Leg Corner Radius | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AHRA | First Leg Distance From Edge To Hole Center Along Width | 0.570 INCHES MINIMUM AND 0.585 INCHES MAXIMUM |
| AKAU | First Leg Hole Arrangement Style | TWO HOLES |
| AHLK | First Leg Hole Diameter | 0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| AHQX | First Leg Distance Between Hole Centers Along Length | 1.346 INCHES NOMINAL |
| AHRB | First Leg Distance From Edge To Hole Center Along Length | 0.504 INCHES NOMINAL |
| AJZU | First Leg Style | CORNER RADIUS |
| AHPW | First Leg Thickness | 0.105 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| AHQN | First Leg Width | 1.140 INCHES MINIMUM AND 1.170 INCHES MAXIMUM |
| ADLK | First Leg Length | 2.740 INCHES MINIMUM AND 2.780 INCHES MAXIMUM |
| MATT | Material | STEEL |
| MDCL | Material Document And Classification | AMS 5390 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLP | Second Leg Distance Between Hole Centers Along Width | 1.723 INCHES NOMINAL |
| AHLW | Second Leg Distance From Edge To Hole Center Along Length | 1.770 INCHES MINIMUM AND 1.810 INCHES MAXIMUM |
| AHLV | Second Leg Distance From Edge To Hole Center Along Width | 0.125 INCHES NOMINAL |
| AHLG | Second Leg Corner Radius | 0.340 INCHES MINIMUM AND 0.360 INCHES MAXIMUM |
| ADLL | Second Leg Length | 1.979 INCHES MINIMUM AND 2.028 INCHES MAXIMUM |
| CSSP | Second Leg Relationship To First Leg | NOT IDENTICAL |
| AKCU | Second Leg Hole Arrangement Style | TWO HOLES |
| AHLN | Second Leg Hole Diameter | 0.415 INCHES MINIMUM AND 0.429 INCHES MAXIMUM |
| AKBU | Second Leg Style | CORNER RADIUS |
| AHPX | Second Leg Thickness | 0.390 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| AHLF | Second Leg Width | 2.390 INCHES NOMINAL |
| FEAT | Special Features | SLOT .21-.23 BEHIND HOLE ALONG LENGTH |
| STYL | Style Designator | ANGLE |
Back to TopBack to Top
