5815-00-503-2652
TELETYPEWRITER SET
5815-00-503-2652 (5815005032652, 005032652)
Part Numbers (3 listings): ANFGC20 | MILT11749 | AN/FGC-20 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| ANFGC20 | 2 - Definitive Specification or Standard Document | 2 - Production Item | MILITARY SPECIFICATIONS | 81349 |  |
| MILT11749 | 4 - Non-Definitive Specification or Standard Document | 1 - Incomplete Part Number | MILITARY SPECIFICATIONS | 81349 | |
| AN/FGC-20 | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | JOINT ELECTRONICS TYPE DESIGNATION | 80058 |  |
2 - Definitive Specification or Standard Document
Reference Number Category Code (DRN_2910)
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
4 - Non-Definitive Specification or Standard Document
Reference Number Category Code (DRN_2910)
Non-Definitive U.S. Government Specification or Standard Reference. Any Government specification or standard reference other than those indicated in code 2 as definitive references. This code shall be used for non-definitive Government specifications and standard references and non-definitive part numbers, type designators, and style numbers included therein which are coded with RNVC 1.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
1 - Incomplete Part Number
Reference Number Variation Code (DRN_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 58 | 5815 | 005032652 | T187-C | 19360 | X | 1 | B | N | U | 1 Jan 1963 |
58
Federal Supply Group (FSG_3994/FSC_WI_FSG_3996)
Communication, Detection, and Coherent Radiation Equipment
T187-C
Federal Item Identification Guide (FIIG_4065)
19360
Item Naming Code (INC_4080)
1 Jan 1963
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
B
Demilitarization Code (DEMIL_CD_0167)
MLI (Non-Significant Military Equipment – Non-SME) — Demilitarization not required — Trade Security Controls (TSCs) required at disposition.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| YB01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZH01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| ZU01 | 1 Aug 1995 | |||||||||||||||||||||||||||||
| WB01 | 1 Feb 2005 | |||||||||||||||||||||||||||||
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4 | 5 | 1 | 5 | SB | D | AN/FGC-20 | 80058 | | ||||
4
Reference Number Format Code (RNFC_2920)
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
1
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
SB
Reference Number Action Activity Code (RNAAC_2900)
645 MSSQ/MSIAPCS, Wright-Patterson AFB, OH 45433-5603
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 6 | 97 | 0 | 15 Aug 1983 |
6
Item Standardization Code (ISC_2650)
An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
97
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
DLIS-LFF, Battle Creek, MI 49037-3084
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
15 Aug 1983
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| J | 734 | 2 | R | A | H | Z | J | 116250 | X | 59490 | TYPEWRITERS-TELETYPEWRITERS-PARTS | 1 |
XX
Originating Activity Code (ORIG_ACTY_CD_4210)
J
Less Than Carload (LCL_CD_2760)
100.2
734
Water Commodity Code (WRT_CMDTY_CD_9275)
Office Machines (Typewriters, Adding Machines, Devices, etc)
2
Type Cargo Code (TYPE_CGO_CD_9260)
Type cargo code not applicable (for Air Force internal use).
R
Special Handling Code (SP_HDLG_CD_9240)
No special handling required. Outsized Dimensions. Dimensions of any piece, package, or palletized, unitized or containerized unit (excluding SEAVAN/MILVAN, CONEXs, and POVs) which exceed six (6) feet in any dimension.
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
H
Air Commodity Code (AIR_CMTY_HDLG_9215)
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
116250
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
X
NMFC Sub Item Number (SUB_ITM_NBR_0861)
59490
Uniform Freight Classification (UFC_CD_MODF_3040)
TYPEWRITERS-TELETYPEWRITERS-PARTS
Freight Description (FRT_DESC_4020)
1 Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
A Variation Exists. NMFC and UFCC Do Not Match. Activity needs to determine which of these descriptions apply.
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | P | ZZ | 1 | 9,999.9 lbs | 2,273.000 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | ZZ | ZZ | Z | ZZ | 00 | ZZ | A |
A
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Packaging Data Record contains data that does not meet current MIL-STD-2073-1C/D formats
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
ZZ
Method of Preservation Code (MTHD_PRSRV_CD_5160)
See J.4.1.b
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
9,999.9 lbs
Unit Pack Weight (UP_WT_5153)
2,273.000 cu ft
Unit Pack Cube (UP_CU_5155)
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
ZZ
Wrapping Material Code (WRAP_MAT_CD_5163)
Special requirements – see specific instructions or drawings provided
ZZ
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
Special requirements. See specific instructions or drawings provided.
Z
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
Special requirements-See specific instructions or drawings provided
ZZ
Unit Container Code (UNIT_CTNR_CD_5166)
Special requirement – See specific instructions or drawings provided.
00
Intermediate Container Code (INTMD_CTNR_CD_5167)
No requirement.
ZZ
Special Marking Code (SP_MKG_CD_5169)
Special requirements
A
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
Packaging is in accordance with a procedural specification or a SPI. The appropriate specification number will be shown in-the-clear in the supplemental data area.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AFHS | Accessory Component Quantity | 1 AND 1 AND 1 |
| ACYN | Ac Voltage Rating | 125.0 VOLTS MAXIMUM |
| ACYN | Ac Voltage Rating | 190.000 VOLTS MINIMUM |
| ACYN | Ac Voltage Rating | 250.000 VOLTS MAXIMUM |
| ACYN | Ac Voltage Rating | 95.0 VOLTS MINIMUM |
| AKVY | Accessory Controlling Agency | JCENS;JCENS;JCENS |
| AKVZ | Accessory Identifying Number | PP-978/FG TYPE NO. AND FN-59/FG TYPE NO. AND TT-100/FG TYPE NO. |
| ANML | Character Quantity Per Line | 72 |
| AFJH | Furnished Items | POWER SUPPLY;TABLE,TELETYPEWRITER;TELETYPEWRITER |
| ACZB | Frequency Rating | 60.0 HERTZ NOMINAL |
| ACZB | Frequency Rating | 60.000 HERTZ NOMINAL |
| ANJN | Motor Type | SYNCHRONOUS |
| ZZZT | Nondefinitive Spec/Std Data | AN/FGC-20 TYPE |
| AMQY | Installation Design | FIXED STATION |
| ALSF | Internal Battery Accommodation | NOT INCLUDED |
| AKWA | Joint Electronics Type Designation System Item Name | TELETYPEWRITER SET |
| AKWB | Joint Electronics Type Designation System Item Type Number | AN/FGC-20 |
| ANMN | Keyboard Language | ENGLISH |
| ALEG | Keyboard Type | STANDARD COMMUNICATIONS |
| FAAZ | Phase | SINGLE |
| ANKJ | Unit Interval Quantity | 5.00 |
| ANMK | Tape Feed Type | FRICTION |
Back to TopBack to Top
