Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
94008A0000 | 3 - Design Control Reference | 2 - Production Item | MARINE CORPS LOGISTICS COMMAND | 01365 | |
94008A0000 | 3 - Design Control Reference | 2 - Production Item | MARINE CORPS LOGISTICS COMMAND | 01365 | |
AN/PSQ-9 | 5 - Replaced / Discontinued | 2 - Production Item | JOINT ELECTRONICS TYPE DESIGNATION | 80058 | |
AN/PSQ-9 | 5 - Replaced / Discontinued | 2 - Production Item | JOINT ELECTRONICS TYPE DESIGNATION | 80058 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
58 | 5825 | 013662452 | A23900 | 77777 | N | M | 1 | C | N | A | A | 0 | 23 Oct 1992 |
Communication, Detection, and Coherent Radiation Equipment
The item does not have a critical feature such as tolerance, fit restrictions or application. Nuclear hardness properties have not been determined (not valid for input).
Partial Descriptive - Reference Item Identification (Type 1A Concept)
An approved item name does not exist.
MLI (SME) — Remove and/or demilitarize installed key point(s) as prescribed in DOD 4160.21-M-1 — Defense Demilitarization Manual, or lethal parts, components and accessories
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
No known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity.
Item does not contain Precious Metal.
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 2 | 1 | ZZ | 94008A0000 | 01365 | |||||||
5 | 2 | 4 | ZZ | AN/PSQ-9 | 80058 |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
USA
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
5 | 97 | 6 | 23 Oct 1992 |
An item authorized for procurement that has not yet been subject to item standardization.
DLIS-LFF, Battle Creek, MI 49037-3084
Item is inactive (no recorded Primary/Secondary Inventory Control Activity (PICA/SICA)). File data coded KFD is forwarded.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
PA | 72D | Z | 4 | Z | 2 | Z | W | 116030 | Z | 59295 | MACHINES-ETC-DATA-PROCESSING |
Marine Corps Logistics Base, Albany, GA 31704-1128
Communications/Electronics, other than SIGINT/EW or COMSEC. Repair Parts and Components
No special type of cargo code applicable
Protected (Sensitive)
Shipment is not a consolidation, but does exceed 72 inches in one or more dimensions.
Arms/Weapons (all types including Inert Component Parts).
No special handling required.
Variable Rating
No Variation. NMFC and UFCC Match.
Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
---|---|---|---|---|---|---|---|---|---|---|---|
A | P | B | ZZ | 1 | 000 | 1,317.0 lbs | 5ft 10in x 45in x 32in | 58.333 cu ft | 1,317.0 lbs | 5ft 10in x 45in x 32in |
Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
---|---|---|---|---|---|---|---|---|---|---|---|
ZZ | ZZ | ZZ | Z | ZZ | ZZ | Z | 00 | Z | Z | F | O |
Packaging Data Record contains data that does not meet current MIL-STD-2073-1C/D formats
Primary Inventory Control Activity (PICA)
Unheated General Purpose
See J.4.1.b
Any suitable process that is not injurious to the item.
Special requirement – See specific instructions or drawings provided
Special requirements – see specific instructions or drawings provided
Special requirements. See specific instructions or drawings provided.
Special requirements-See specific instructions or drawings provided
Special requirement – See specific instructions or drawings provided.
Special requirement – See specific instructions or drawings provided.
Unit container requires special consideration (air only, inside storage only, etc.)
No special marking
Special requirement. See specific instructions or drawings provided.
Special requirement. See specific instructions or drawings provided.
Packing is not required; the unit container shall also serve as the shipping container. Closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
TEXT | General Characteristics Item Description | TPCS IS DESIGNED TO BE A MAN/TEAM-PORTABLE,VEHICLE TRANSPORTABLE,LIGHT WEIGHT,MODULAR,AND SCALEABLE GROUND COMINT SYSTEM WITH INTEGRATED DF,COLLECTION,ANALYSIS,PROCESSING,AND DISSEMINATION CAPABILITIES,CONSISTS OFOUTSTATIONS (CCS-OS) 4: EACH OUTSTATION CONSISTS OF - SUPERVISOR MANPACK 1;AND COLLECTION OPERATOR MANPACKS 2; ANALYSIS SUBSYSTEM (AS) 1: EACH "AS" CONSISTS OF - ANALYST SUPERVISOR MANPACK 1; FILE SERVER MANPACK 1; ANALYST TRANSCRIBER MANPACK 2; ANALYST MANPACK 1; EXTERNAL COMM MANPACK 1; AND AC COMM MANPACK 1; COMMUNICATION SUBSYSTEM (CS) 1: EACH "CS" CONSISTS OF - COMM OPERATOR MANPACK 2; CRYPTO EQUIP MANPACK 1; AND EXTERNAL COMM/HF COMM MANPACK1 |
FEAT | Special Features | HTEAM PORTABLE COLLECTION SYSTEM TPCS IS DESIGNED TO BE A MAN/TEAM-PORTABLE, VEHICLE TRANSPORTABLE, LIGHT WEIGHT, MODULAR, AND SCALEABLE GROUND COLLECTION SYSTEM WITH INTEGRATED DF, COLLECTION, ANALYSIS, PROCESSING, AND DISSEMINATION CAPABILITIES, CONSISTS OF OUTSTATIONS (CCS-OS) 4: EACH OUTSTATION CONSISTS OF - SUPERVISOR MANPACK 1; AND COLLECTION OPERATOR MANPACKS 2; ANALYSIS SUBSYSTEM (AS) 1: EACH "AS" CONSISTS OF - ANALYST SUPERVISOR MANPACK 1;FILE SERVER MANPACK 1; ANALYST TRANSCRIBER MANPACK 2; ANALYST MANPACK 1; EXT ERNAL COMM MANPACK 1; AND AC COMM MANPACK1; COMMUNICATION SUBSYSTEM (CS) 1: EACH "CS" CONSISTS OF - COMM OPERATOR MANPACK 2; CRYPTO EQUIP MANPACK 1; AND EXTERNAL COMM/HF COMM MANPACK 1 |