5841-01-374-4267
PROCESSOR,RADAR DATA
5841-01-374-4267 (5841013744267, 013744267)
Part Numbers (5 listings): C99A9143-11 | 807414-11 | MX-10855/A | 807414-6 | C99A9143-1 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| C99A9143-11 | 1 - Source of Control Reference | 3 - Reparable Item | NORTHROP GRUMMAN SYSTEMS CORPORATION | 26512 |  |
| 807414-11 | 3 - Design Control Reference | 3 - Reparable Item | NORTHROP GRUMMAN GUIDANCE AND | 06481 |  |
| MX-10855/A | 5 - Replaced / Discontinued | 3 - Reparable Item | JOINT ELECTRONICS TYPE DESIGNATION | 80058 |  |
| 807414-6 | 5 - Replaced / Discontinued | 9 - No Longer Used | NORTHROP GRUMMAN GUIDANCE AND | 06481 | |
| C99A9143-1 | 5 - Replaced / Discontinued | 9 - No Longer Used | NORTHROP GRUMMAN SYSTEMS CORPORATION | 26512 | |
1 - Source of Control Reference
Reference Number Category Code (DRN_2910)
Source of Control Reference. The number assigned by a design control manufacturer of an end item of equipment, including a Government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for Source Control Drawing in MIL-STD-100. (Applicable only to type 1, 1B, 2, 4 and 4B item identifications.)
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
3 - Reparable Item
Reference Number Variation Code (DRN_4780)
A vendor's reference (part) number on a source control item, as defined in MIL-STD-100A, which is reparable through the removal, exchange, and reinstallation of component parts. The related source control document number will also reflect the code 3. This code is limited to a type 1B or 4B item identification.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 58 | 5841 | 013744267 | A32200 | 39661 | Y | N | 3 | D | N | B | A | 0 | 22 Apr 1993 |
58
Federal Supply Group (FSG_3994/FSC_WI_FSG_3996)
Communication, Detection, and Coherent Radiation Equipment
A32200
Federal Item Identification Guide (FIIG_4065)
39661
Item Naming Code (INC_4080)
22 Apr 1993
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
Y
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature but does have other critical feature(s) such as tolerance, fit restriction or application.
N
Type of Item Identification (TYP_II_4820)
Partial Descriptive - Reference - Descriptive Item Identification (Type 1B Concept)
3
Reference / Partial Descriptive Method Reason Code (RPDMRC_4765)
An approved item name and FIIG exist but the item involved is so unique in design that it cannot be fully described in accordance with the FIIG.
D
Demilitarization Code (DEMIL_CD_0167)
MLI (SME) — Total destruction of item and components so as to preclude restoration or repair to a usable condition by melting, cutting, tearing, scratching, crushing, breaking, punching, neutralizing, etc. (As an alternate, burial or deep water dumping may be used when coordinated with the DOD Demilitarization Program Office.)
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
B
Electrostatic Discharge Code (ESD_EMI_CD_2043)
Represents items with ESD sensitivity.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
0
ADPE Identification Code (ADPEC_0801)
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FNN4 | FGG4 | 0 | 0 | P | E | CN | 1 Feb 2002 | |||||||||||||||||||||||
0
Acquisition Method Code (AMC_2871)
Not Established
P
Nonconsumable Item Material Support Code (NIMSC_0076)
Total depot maintenance is being accomplished by commercial contract.
E
Item Management Code (IMC_2744)
Reparables: Centrally managed recoverable items designated as reparable for the reasons that repair of unserviceable quantities of the items are considered by the inventory manager in satisfying requirements prior to or in conjunction with determining procurement quantities.
CN DSOR
Depot Source of Repair Codes (DSOR_0903)
Contract, Contiguous United States (CONUS)
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 3 | 2 | ZZ | C99A9143-11 | 26512 | | ||||||
| 3 | 3 | 2 | ZZ | 807414-11 | 06481 | | ||||||
| 5 | 3 | 4 | MG | MX-10855/A | 80058 | | ||||||
| 5 | 9 | 2 | MG | B | 807414-6 | 06481 | | |||||
| 5 | 9 | 2 | MG | B | C99A9143-1 | 26512 | | |||||
1
Reference Number Category Code (RNCC_2910)
Source of Control Reference. The number assigned by a design control manufacturer of an end item of equipment, including a Government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for Source Control Drawing in MIL-STD-100. (Applicable only to type 1, 1B, 2, 4 and 4B item identifications.)
3
Reference Number Variation Code (RNVC_4780)
A vendor's reference (part) number on a source control item, as defined in MIL-STD-100A, which is reparable through the removal, exchange, and reinstallation of component parts. The related source control document number will also reflect the code 3. This code is limited to a type 1B or 4B item identification.
2
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the drawing.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
4
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
MG
Reference Number Action Activity Code (RNAAC_2900)
Engineering Data Support Center, Robbins AFB, GA 31098-5690
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 2 | TU | 0 | 6 Apr 1993 |
2
Item Standardization Code (ISC_2650)
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
TU
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
AF Cataloging Agent DLIS-K, Battle Creek, MI 49037-3094
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
6 Apr 1993
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TG | 658 | 3 | 9 | A | H | Z | W | 061700 | Z | 34580 | ELEC-APPLIANCES-INSTRUMENTS-NOI |
TG
Originating Activity Code (ORIG_ACTY_CD_4210)
Warner-Robins Air Logistics Center, Robins AFB, GA 31098-5609
658
Water Commodity Code (WRT_CMDTY_CD_9275)
Electical Appliances, Small
3
Type Cargo Code (TYPE_CGO_CD_9260)
Electrostatic Sensitive Device (ESD), subject to damage caused by electrostatic discharge. (See DoD 4500.32-R, Volume 1, Appendix A, Section I for additional information on ESD devices).
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
H
Air Commodity Code (AIR_CMTY_HDLG_9215)
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
W
Less Than Truckload (CLAS_RTNG_CD_2770)
Variable Rating
061700
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
Z
NMFC Sub Item Number (SUB_ITM_NBR_0861)
34580
Uniform Freight Classification (UFC_CD_MODF_3040)
ELEC-APPLIANCES-INSTRUMENTS-NOI
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
F74
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Northrop Grumman Corporation, USAF Depot CO AAR DEF COR, FOR DEPOT STORAGE ONLY, 7977 NE Industrial Blvd, Macon, GA 31216-7742
C
Acquisition Advice Code (AAC_2507)
SERVICE/AGENCY-MANAGED (Service/Agency use only.) Issue, transfer, or shipment is not subject to specialized controls other than those imposed by individual Services supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with Service requisitioning procedures.
7
Controlled Item Inventory Code (CIIC_2863)
Non-Sensitive (SRC-N/A) — UNCLASSIFIED AA&E or Items assigned a Demilitarization Code other than A, B, Q or P for which another CIIC is inappropriate. (NOTE: The loss, theft, unlawful 011disposition, and/or recovery of an item with CIIC 7 will be investigated in accordance with DoD 4000.25-2-M and DoD 7200.14–R, Volume 12, Chapter7).
1
Quantity Unit Pack (QUP_6106)
1
T
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
AIR FORCE ERRC XD2: AF Recoverable Assembly Management System (AFRAMS); NAVY: Terminal Items
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DF
Service / Agency Code (MOE_CD_2833)
Department of the Air Force
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | P | GX | 1 | 960.0 lbs | 69.000 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | ZZ | ZZ | Z | ZZ | ZZ | 39 | M |
A
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Packaging Data Record contains data that does not meet current MIL-STD-2073-1C/D formats
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
GX
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Preserve by Method 41 as follows: Items subject to damage by electromagnetic and electrostatic field forces shall be initially wrapped in material conforming to MIL-PRF-81705, Type III, or bags conforming to MIL-DTL-117, Type II, Class H, Style 2, or cushioned in material conforming to A-A-3129, Type I, Grade B or PPP-C-795, Class 2 or PPP-C-1797, Type II, to prevent bag puncture, and unit packed in a heat-sealed bag conforming to MIL-DTL-117, Type I, Class F, Style 1. Reclosable cushioned pouches conforming to MIL-DTL-81997, Type I or II, may be used in lieu of initial wrap or cushioning. Lead or terminal configurations for all items shall be maintained as manufactured without causing loads or stresses capable of causing damage to the item. Materials used to maintain item position and lead or terminal configuration shall permit item removal without damage to the item. Electrostatic discharge (ESD) sensitive caution labels shall be applied in accordance with MIL-STD-129.
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
960.0 lbs
Unit Pack Weight (UP_WT_5153)
69.000 cu ft
Unit Pack Cube (UP_CU_5155)
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
ZZ
Wrapping Material Code (WRAP_MAT_CD_5163)
Special requirements – see specific instructions or drawings provided
ZZ
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
Special requirements. See specific instructions or drawings provided.
Z
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
Special requirements-See specific instructions or drawings provided
ZZ
Unit Container Code (UNIT_CTNR_CD_5166)
Special requirement – See specific instructions or drawings provided.
ZZ
Intermediate Container Code (INTMD_CTNR_CD_5167)
Special requirement – See specific instructions or drawings provided.
39
Special Marking Code (SP_MKG_CD_5169)
ESD sensitive electronic device requirements of MIL-STD-129 apply
M
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AGAV | End Item Identification | AN/APY-3,U/O E-8A ACFT |
| AFSU | Average Life Measurement | NOT RATED |
| AGTA | Basic Shape Style | RECTANGULAR OR SQUARE |
| CRTL | Criticality Code Justification | FEAT |
| FTLD | Functional Description | PROVIDES PARTIALLY PROCESSED ANGULAR RATE AND LINEAR ACCELERATION OF ANTENNA,TO RADAR DATA COMPUTER |
| BHSX | Circuit Construction Type | SOLID STATE |
| AKNA | Inclosure Type | ENCASED |
| AMQY | Installation Design | MECHANICAL |
| ZZZY | Reference Number Differentiating Characteristics | DIFFERENTIATED BY PART NUMBER |
| ABKW | Overall Height | 3.980 INCHES NOMINAL |
| ABHP | Overall Length | 6.980 INCHES NOMINAL |
| ABMK | Overall Width | 6.500 INCHES NOMINAL |
| FEAT | Special Features | ELECTROSTATIC DISCHARGE SENSITIVE |
| TMDN | Type/Model Designation | MX-10855/A |
Back to TopBack to Top
