- FSG 59 - Electrical and Electronic Equipment Components
- FSC 5905 - Resistors
- NSN 5905-00-456-2420
5905-00-456-2420
RESISTOR NETWORK,FIXED,FILM
5905-00-456-2420 (5905004562420, 004562420)
Part Numbers (6 listings): C600011890 | 310175 | NW5694 | 1997 | 100950 | RN1185 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| C600011890 | 3 - Design Control Reference | 2 - Production Item | KEARFOTT CORPORATION | 88818 |  |
| 310175 | 3 - Design Control Reference | 2 - Production Item | VISHAY INTERTECHNOLOGY, INC. | 18612 |  |
| NW5694 | 5 - Replaced / Discontinued | 2 - Production Item | PRIME TECHNOLOGY, LLC | 0BHF9 |  |
| 1997 | 5 - Replaced / Discontinued | 9 - No Longer Used | ULTRONIX INC | 05347 |  |
| 100950 | 5 - Replaced / Discontinued | 9 - No Longer Used | JEFFERS ELECTRONICS INC | 59474 |  |
| NW5694 | 5 - Replaced / Discontinued | 9 - No Longer Used | GENERAL RESISTANCE INC | 05591 |  |
| RN1185 | 5 - Replaced / Discontinued | 9 - No Longer Used | TANGER ELECTRONICS A DIV OF VERIT | 15584 |  |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
9 - No Longer Used
Reference Number Variation Code (DRN_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 59 | 5905 | 004562420 | A001A0 | 32068 | X | 1 | A | N | B | U | 23 Apr 1969 |
A001A0
Federal Item Identification Guide (FIIG_4065)
32068
Item Naming Code (INC_4080)
23 Apr 1969
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
B
Electrostatic Discharge Code (ESD_EMI_CD_2043)
Represents items with ESD sensitivity.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| N9BN | N9ND | 3 | L | Z | GH | KE | 1 Apr 2006 | |||||||||||||||||||||||
3
Acquisition Method Code (AMC_2871)
Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer.
L
Acquisition Method Suffix Code (AMSC_2876)
The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
GH
Item Management Coding Activity (IMC_ACTY_2748)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
KE Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval ICP, Philadelphia, PA 19111
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 3 | 2 | 5 | KE | D | 310175 | 18612 | | ||||
| 3 | 3 | 2 | A | TX | D | C600011890 | 88818 | | ||||
| 5 | 2 | 5 | TX | NW5694 | 0BHF9 | | ||||||
| 4 | 5 | 9 | 5 | TX | B | RN1185 | 15584 | | ||||
| 3 | 5 | 9 | 5 | KE | B | 1997 | 05347 | | ||||
| 3 | 5 | 9 | 5 | TX | B | NW5694 | 05591 | | ||||
| 5 | 9 | 5 | KE | B | 100950 | 59474 | | |||||
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
KE
Reference Number Action Activity Code (RNAAC_2900)
Naval ICP, Philadelphia, PA 19111
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
A
Document Availability Code (DAC_2640)
The reference number is represented by an engineering drawing and the drawing is available for unlimited use. The drawing will be furnished by the activity identified by the RNAAC upon request.
TX
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Columbus, Columbus, OH 43218
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
4
Reference Number Format Code (RNFC_2920)
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
9
Reference Number Variation Code (RNVC_4780)
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
B
Reference Number Status Code (RNSC_2923)
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 6 | TX | 0 | 10 Jun 1977 |
6
Item Standardization Code (ISC_2650)
An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
TX
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Columbus, Columbus, OH 43218
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
10 Jun 1977
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| KE | 72D | 3 | 9 | A | H | Z | P | 062960 | X | 35140 | REOSTATS-PARTS-NOI |
KE
Originating Activity Code (ORIG_ACTY_CD_4210)
Naval ICP, Philadelphia, PA 19111
72D
Water Commodity Code (WRT_CMDTY_CD_9275)
Communications/Electronics, other than SIGINT/EW or COMSEC. Repair Parts and Components
3
Type Cargo Code (TYPE_CGO_CD_9260)
Electrostatic Sensitive Device (ESD), subject to damage caused by electrostatic discharge. (See DoD 4500.32-R, Volume 1, Appendix A, Section I for additional information on ESD devices).
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
H
Air Commodity Code (AIR_CMTY_HDLG_9215)
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
P
Less Than Truckload (CLAS_RTNG_CD_2770)
77.5
062960
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
X
NMFC Sub Item Number (SUB_ITM_NBR_0861)
35140
Uniform Freight Classification (UFC_CD_MODF_3040)
REOSTATS-PARTS-NOI
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
Z
Acquisition Advice Code (AAC_2507)
INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM. Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | ZZ | XXX |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| X | 00 | Q | Q | O |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
ZZ
Method of Preservation Code (MTHD_PRSRV_CD_5160)
See J.4.1.b
XXX
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
Unit Pack Weight (UP_WT_5153)
Unit Pack Cube (UP_CU_5155)
X
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
As required to protect the item or elements of the package
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
Q
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
O
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| AAPP | Electrical Resistance | 1.109 KILOHMS |
| AAPP | Electrical Resistance | 2.269 KILOHMS |
| AAPP | Electrical Resistance | 2.500 KILOHMS |
| AAPP | Electrical Resistance | 26.595 KILOHMS |
| AAPP | Electrical Resistance | 3.454 KILOHMS |
| AAPP | Electrical Resistance | 1.500 KILOHMS |
| AAPP | Electrical Resistance | 10.504 KILOHMS |
| AAPP | Electrical Resistance | 100.000 KILOHMS |
| AAPP | Electrical Resistance | 13.815 KILOHMS |
| AAPP | Electrical Resistance | 18.000 KILOHMS |
| AAPP | Electrical Resistance | 85.144 KILOHMS |
| AAPP | Electrical Resistance | 9.000 KILOHMS |
| AAPP | Electrical Resistance | 93.100 KILOHMS |
| AAPP | Electrical Resistance | 93.110 KILOHMS |
| AAPP | Electrical Resistance | 96.000 KILOHMS |
| AAPP | Electrical Resistance | 36.000 KILOHMS |
| AAPP | Electrical Resistance | 4.500 KILOHMS |
| AAPP | Electrical Resistance | 4.753 KILOHMS |
| AAPP | Electrical Resistance | 48.000 KILOHMS |
| AAPP | Electrical Resistance | 5.000 KILOHMS |
| AAQF | Ambient Temp In Deg Celsius At Full Rated Power | 25.0 |
| AAQG | Ambient Temp In Deg Celsius At Zero Percent Rated Power | 110.0 |
| ADAU | Body Height | 0.500 INCHES MAXIMUM |
| ADAQ | Body Length | 2.600 INCHES MAXIMUM |
| ADAT | Body Width | 1.125 INCHES MAXIMUM |
| CBME | Cubic Measure | 1.463 CUBIC INCHES |
| CQRD | Identical Value Resistor Quantity | 1 3RD INTERMEDIATE RESISTANCE VALUE |
| CQRD | Identical Value Resistor Quantity | 1 4TH INTERMEDIATE RESISTANCE VALUE |
| CQRD | Identical Value Resistor Quantity | 1 6TH INTERMEDIATE RESISTANCE VALUE |
| CQRD | Identical Value Resistor Quantity | 1 7TH INTERMEDIATE RESISTANCE VALUE |
| CQRD | Identical Value Resistor Quantity | 1 9TH INTERMEDIATE RESISTANCE VALUE |
| CQRD | Identical Value Resistor Quantity | 1 10TH INTERMEDIATE RESISTANCE VALUE |
| CQRD | Identical Value Resistor Quantity | 1 12TH INTERMEDIATE RESISTANCE VALUE |
| CQRD | Identical Value Resistor Quantity | 1 13TH INTERMEDIATE RESISTANCE VALUE |
| CQRD | Identical Value Resistor Quantity | 1 14TH INTERMEDIATE RESISTANCE VALUE |
| CQRD | Identical Value Resistor Quantity | 1 15TH INTERMEDIATE RESISTANCE VALUE |
| CQRD | Identical Value Resistor Quantity | 1 16TH INTERMEDIATE RESISTANCE VALUE |
| CQRD | Identical Value Resistor Quantity | 1 17TH INTERMEDIATE RESISTANCE VALUE |
| CQRD | Identical Value Resistor Quantity | 1 18TH INTERMEDIATE RESISTANCE VALUE |
| CQRD | Identical Value Resistor Quantity | 1 1ST INTERMEDIATE RESISTANCE VALUE |
| CQRD | Identical Value Resistor Quantity | 1 2ND INTERMEDIATE RESISTANCE VALUE |
| CQRD | Identical Value Resistor Quantity | 1 LOWEST RESISTANCE VALUE |
| CQRD | Identical Value Resistor Quantity | 10 HIGHEST RESISTANCE VALUE |
| CQRD | Identical Value Resistor Quantity | 2 5TH INTERMEDIATE RESISTANCE VALUE |
| CQRD | Identical Value Resistor Quantity | 3 11TH INTERMEDIATE RESISTANCE VALUE |
| CQRD | Identical Value Resistor Quantity | 4 8TH INTERMEDIATE RESISTANCE VALUE |
| AAQZ | Inclosure Method | ENCAPSULATED |
| AEFB | Power Dissipation Rating In Watts | 0.0003 EACH RESISTOR AND 0.0025 EACH RESISTOR AND 0.0003 EACH RESISTOR AND 0.0025 EACH RESISTOR AND 0.001 EACH RESISTOR AND 0.00125 EACH RESISTOR AND 0.0003 EACH RESISTOR AND 0.005 EACH RESISTOR AND 0.00063 EACH RESISTOR AND 0.0025 EACH RESISTOR AND 0.0003 EACH RESISTOR AND 0.005 EACH RESISTOR AND 0.00125 EACH RESISTOR AND 0.00032 EACH RESISTOR AND 0.0003 EACH RESISTOR AND 0.00063 EACH RESISTOR AND 0.00008 EACH RESISTOR AND 0.00016 EACH RESISTOR AND 0.0003 EACH RESISTOR AND 0.00016 EACH RESISTOR AND 0.0003 EACH RESISTOR AND 0.0003 EACH RESISTOR AND 0.00015 EACH RESISTOR |
| AAPQ | Resistance Tolerance In Percent | -1.000/+1.000 |
| AARG | Reliability Indicator | NOT ESTABLISHED |
| PKWT | Unpackaged Unit Weight | 60.0 GRAMS |
| STYL | Style Designator | DUAL INLINE |
| ABJT | Terminal Length | 0.625 INCHES MINIMUM AND 1.125 INCHES MAXIMUM |
| AARA | Terminal Quantity | 37 |
| AARB | Terminal Type | PIN |
Back to TopBack to Top
