Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
3059Y1-103 | 3 - Design Control Reference | 2 - Production Item | BOURNS LTD | K5743 | ![]() |
378771-10 | 5 - Replaced / Discontinued | 2 - Production Item | SYPRIS ELECTRONICS, LLC | 14028 | ![]() |
40-546-1103-10 | 5 - Replaced / Discontinued | 2 - Production Item | MEGGITT (UK) LTD | K0802 | ![]() |
3059Y1-103 | 5 - Replaced / Discontinued | 9 - No Longer Used | BOURNS INSTRUMENTS INC | 80294 | ![]() |
70Y103 | 5 - Replaced / Discontinued | 9 - No Longer Used | IV-ELECTRONIC KLAUS VESPERMANN KG | C7407 | ![]() |
70Y103 | C - Advisory Reference | 1 - Incomplete Part Number | VISHAY THIN FILM, LLC | 02111 | ![]() |
3059Y10K | C - Advisory Reference | 1 - Incomplete Part Number | BOURNS, INC. | 32997 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
59 | 5905 | 004771253 | A002A0 | 37405 | X | 1 | A | N | A | U | 18 Jun 1971 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive Item Identification
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
No known Electrostatic Discharge (ESD) or Electromagnetic Interference (EMI) sensitivity.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
YJ01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZA01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZE01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
YB01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZG01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZK01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZR01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZT01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
ZP01 | 1 Apr 1997 | |||||||||||||||||||||||||||||
A918 | 3 | D | Z | CD | AZ | BS | BF | 1 Nov 2012 | ||||||||||||||||||||||
C911 | 3 | D | 1 Nov 2012 | |||||||||||||||||||||||||||
FXGX | 3 | D | Z | SX | 1 Nov 2012 | |||||||||||||||||||||||||
N9BN | 3 | D | Z | GH | GT | KE | JV | HD | 1 Nov 2012 | |||||||||||||||||||||
BGX1 | 0 | 0 | 5 Nov 2012 | |||||||||||||||||||||||||||
ZF01 | 1 Jun 2015 | |||||||||||||||||||||||||||||
YD01 | 1 Aug 2016 |
Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer.
The data needed to produce this item from additional sources is not physically available. Valid AMCs: 3, 4 and 5.
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
U.S. Army War Reserve Command, New Cumberland, PA 17070-5008
Oklahoma City Air Logistics Center, Tinker AFB, OK 73145-3043
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
Not Established
U.S. Army Tank-Automotive and Armaments, Command, Warren, MI 48397-5000
USAMC Data Management Center, Redstone Arsenal, AL 35898-5239
U.S. Army Armament and Chemical Acquisition and, Logistics Activity, Rock Island, IL 61299-6000
Naval ICP, Philadelphia, PA 19111
Strategic Systems Programs C/O Tracor Sys Engineering Rockville, MD 20850-1160
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 3 | 2 | 5 | KE | D | 3059Y1-103 | K5743 | ![]() | ||||
5 | 2 | 5 | KE | D | 40-546-1103-10 | K0802 | ![]() | |||||
3 | 5 | 2 | 1 | TX | D | 378771-10 | 14028 | ![]() | ||||
3 | 5 | 9 | 3 | TX | B | 3059Y1-103 | 80294 | ![]() | ||||
4 | 5 | 9 | 3 | ZG | B | 70Y103 | C7407 | ![]() | ||||
1 | C | 1 | 5 | 48 | B | 3059Y10K | 32997 | ![]() | ||||
1 | C | 1 | 5 | 48 | B | 70Y103 | 02111 | ![]() |
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
Naval ICP, Philadelphia, PA 19111
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
Defense Supply Center Columbus, Columbus, OH 43218
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the technical documentation upon request.
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
Germany
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
Federal Aviation Administration, Oklahoma City, OK 73125
ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
---|---|---|---|---|---|---|---|---|
1 | TX | 0 | 3 | TX | 1 | 5 Nov 2012 | 5905000796552 | 5 Nov 2012 |
1 | TX | 0 | 3 | TX | 1 | 5 Nov 2012 | 5905001040823 | 5 Nov 2012 |
1 | TX | 0 | 3 | TX | 1 | 5 Nov 2012 | 5905008494321 | 5 Nov 2012 |
1 | TX | 0 | 3 | TX | 1 | 5 Nov 2012 | 5905009214240 | 5 Nov 2012 |
1 | TX | 0 | 3 | TX | 1 | 5 Nov 2012 | 5905010111694 | 5 Nov 2012 |
1 | TX | 0 | 3 | TX | 1 | 5 Nov 2012 | 5905010138265 | 5 Nov 2012 |
1 | TX | 0 | 3 | TX | 1 | 5 Nov 2012 | 5905010316927 | 5 Nov 2012 |
1 | TX | 0 | 3 | TX | 0 | 5 Nov 2012 | 5905012695965 | 5 Nov 2012 |
An item authorized for procurement as a result of a formal item reduction study and accepted as a replacement for one or more items not authorized for procurement. In addition, in generic relationships, a code 1 item is related to a code 2 item.
Defense Supply Center Columbus, Columbus, OH 43218
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
An item which, as a result of a formal item reduction study, is accepted as not authorized for procurement.
Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. See volume 4, chapter 4.9.Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.Represents an item for which a U.S. activity proposed cancelled-invalid or cancelled-use action or that the NIIN Status Code be changed to 9, and one or more NATO/FC did not concur in the proposal. Item is restricted to North Atlantic Treaty Organization/foreign country (NATO/FC) use only.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TX | 671 | Z | 9 | A | A | Z | W | 061700 | Z | 34580 | ELEC-APPLIANCES-INSTRUMENTS-NOI |
Defense Supply Center Columbus, Columbus, OH 43218
Aircraft Parts, To include Test/Tool Sets and Equipment (other than armament systems)
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft instruments and laboratory test equipment, aerial targets and gliders, aircraft/missile technical order compliance kits, etc
No special handling required.
Variable Rating
No Variation. NMFC and UFCC Match.
Unit Price | MOE | SOS | AAC | CIIC | QUP | Reparability | UI | SLC |
---|---|---|---|---|---|---|---|---|
DA | SMS | Z | U | 0 | A | EA | 0 | |
DF | SMS | Z | U | 1 | N | EA | 0 | |
DN | SMS | Z | U | 0 | EA | 0 | ||
DS | SMS | Z | U | 1 | N | EA | 0 | |
GP | SMS | Z | U | 0 | EA | 0 |
Defense Logistics Agency, Enterprise Business Systems
INSURANCE/NUMERIC STOCKAGE OBJECTIVE ITEM. Items which may be required occasionally or intermittently, and prudence requires that a nominal quantity of materiel be stocked due to the essentiality or the lead time of the item. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with IMM/Service requisitioning procedures.
Unclassified
No QUP
ARMY: Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. Refer to appropriate manuals or directives for specific instructions. MARINE CORPS: Item requires special handling/or condemnation procedures because of specific reasons (i.e., precious metal content, high dollar value, critical material, or hazardous material). Refer to appropriate manuals/directives for specific instructions. NAVY: Field Activity Control Items
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
1
AIR FORCE ERRC XB3: Stock Fund (Except Munitions); DLA: This item has been reviewed and a determination made that the item cannot or should not be restored to a serviceable condition from an unserviceable condition; NAVY: 1I cog not stocked print on demand flat forms
Department of the Army
Department of the Air Force
Department of the Navy
Defense Logistics Agency
U.S. Coast Guard
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AEFH | Effective Electrical Rotation In Deg Angular Rotation | 7920.0 NOMINAL |
CQCC | Electrical Resistance Per Section | 10.0 KILOHMS SINGLE SECTION |
CRSX | Actuator Travel Control Feature | CLUTCH |
AEFD | Actuator Type | SINGLE SHAFT |
CSDH | Ambient Temp In Deg Celsius Per Section At Full Rated Power | 70.0 SINGLE SECTION |
CQGN | Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power | 150.0 SINGLE SECTION |
ADAU | Body Height | 0.315 INCHES NOMINAL |
ADAQ | Body Length | 1.250 INCHES NOMINAL |
ADAT | Body Width | 0.190 INCHES NOMINAL |
AAQL | Body Style | RECTANGULAR W/MOUNTING HOLES/SLOTS |
CQCM | Center To Center Distance Between Center Terminal And Outside Terminal | 0.300 INCHES NOMINAL |
AEHT | Center To Center Distance Between Terminals | 0.700 INCHES NOMINAL |
AYQR | Center To Center Distance Between Terminal Rows | 0.100 INCHES NOMINAL |
CBBL | Features Provided | NONMETALLIC SHAFT |
AEFK | Maximum Starting Torque | 5.00 INCH-OUNCES |
AKPV | Mounting Facility Quantity | 2 |
ABTB | Mounting Hole Diameter | 0.093 INCHES NOMINAL |
AXGY | Mounting Method | TERMINAL AND UNTHREADED HOLE |
ABKW | Overall Height | 0.815 INCHES NOMINAL |
ABHP | Overall Length | 1.308 INCHES NOMINAL |
ABMK | Overall Width | 0.190 INCHES NOMINAL |
AGTP | Lateral Distance Between Mounting Hole Centers | 1.000 INCHES NOMINAL |
CRGD | Power Dissipation Rating Per Section In Watts | 1.0 FREE AIR SINGLE SECTION |
AARG | Reliability Indicator | NOT ESTABLISHED |
CRSS | Resistance Tolerance Per Section In Percent | -10.0 TO 10.0 SINGLE SECTION |
CQCK | Rotary Actuator Travel In Angular Deg | 7920.0 NOMINAL |
AAPN | Section Quantity | 1 |
ABWV | Shaft Diameter | 0.115 INCHES NOMINAL |
ABXF | Shaft Length | 0.058 INCHES NOMINAL |
AEDX | Shaft Style | ROUND, SLOTTED |
CRFJ | Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius | -100.0 TO 100.0 SINGLE SECTION |
APXH | Terminal Location | LOWER ADJACENT SIDE SINGLE ROW |
ABJT | Terminal Length | 0.500 INCHES NOMINAL |
TTQY | Terminal Type And Quantity | 3 PIN |