- FSG 59 - Electrical and Electronic Equipment Components
- FSC 5910 - Capacitors
- NSN 5910-14-330-4795
5910-14-330-4795
CAPACITOR,FIXED,CERAMIC DIELECTRIC
5910-14-330-4795 (5910143304795, 143304795)
Part Numbers (6 listings): CN21-3-1KM | DSW110-1KM | 8324761102 | CA239T1000 | DSW110-1000PFP0M20PCT | 8-324761-102 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| CN21-3-1KM | 2 - Definitive Specification or Standard Document | 2 - Production Item | UNION TECHNIQUE ELECTRICITE | F0115 |  |
| DSW110-1KM | 3 - Design Control Reference | 2 - Production Item | TPC | F0350 |  |
| 8324761102 | 5 - Replaced / Discontinued | 2 - Production Item | LABINAL | F0217 |  |
| CA239T1000 | 5 - Replaced / Discontinued | 2 - Production Item | THALES SYSTEMES AEROPORTES S.A | F0052 |  |
| CA239T1000 | 5 - Replaced / Discontinued | 2 - Production Item | THALES DEFENCE & SECURITY | D2416 |  |
| DSW110-1000PFP0M20PCT | 5 - Replaced / Discontinued | 2 - Production Item | TPC | F0350 | |
| 8-324761-102 | 5 - Replaced / Discontinued | 2 - Production Item | LABINAL | F0217 | |
2 - Definitive Specification or Standard Document
Reference Number Category Code (DRN_2910)
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ZF | ||||||||||||||||||||||||||||||
| ZP | ||||||||||||||||||||||||||||||
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 2 | 2 | 3 | 65 | C | CN21-3-1KM | F0115 | | ||||
| 3 | 3 | 2 | 3 | 65 | D | DSW110-1KM | F0350 | | ||||
| 4 | 5 | 2 | 9 | ZG | D | CA239T1000 | D2416 | | ||||
| 3 | 5 | 2 | 6 | 37 | D | CA239T1000 | F0052 | | ||||
| 3 | 5 | 2 | 1 | 65 | D | 8-324761-102 | F0217 | | ||||
| 1 | 5 | 2 | 4 | 65 | D | 8324761102 | F0217 | | ||||
| 4 | 5 | 2 | 4 | 65 | D | DSW110-1000PFP0M20PCT | F0350 | | ||||
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
2
Reference Number Category Code (RNCC_2910)
Definitive Government Specification or Standard Designator Reference. A part number, style number, or type designator included in or developed in accordance with a Government specification or standard which has the effect of fully identifying an item of supply. This code shall also be used for a Government specification or standard which, although not including part numbers, style numbers, or type designators, covers a single item of upply. These reference numbers may be coded with Reference Number Variation Code (RNVC) 1 in accordance with volume 2, paragraph 2.9.2.n.(4).
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
3
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the technical documentation upon request.
65
Reference Number Action Activity Code (RNAAC_2900)
National Institutes of Health, Rockville, MD 20892
C
Reference Number Status Code (RNSC_2923)
The reference number originates from a descriptive technical document of the product, which may be used as a procurement document without restrictions. The NCAGE specified for this reference number identifies the originating organization or agency of the document but not the supply source of the item. NOTE: This code is to be allocated to reference numbers originating from generally available specifications/standards or to drawing numbers for which the Government has separate property rights or for which the author does not claim any property rights.
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
4
Reference Number Format Code (RNFC_2920)
Number is totally in-the-clear (without modification) as originally configured by the manufacturer, design control activity, or supplier.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
9
Document Availability Code (DAC_2640)
The reference number is of the type for which an indication of document availability is not required.
ZG
Reference Number Action Activity Code (RNAAC_2900)
Germany
6
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
37
Reference Number Action Activity Code (RNAAC_2900)
Department of Interior, Washington, DC 20006
1
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
1
Reference Number Format Code (RNFC_2920)
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
4
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number; however, the RNAAC cannot furnish the technical documentation.
Back to TopBack to Top
