Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
B46N0088-1 | 3 - Design Control Reference | 9 - No Longer Used | MCDONNELL DOUGLAS CORP | 12464 | ![]() |
JN14-1968C | 5 - Replaced / Discontinued | 1 - Incomplete Part Number | SPRAGUE ELECTRIC CO | 56289 | ![]() |
9622-001-9000 | 5 - Replaced / Discontinued | 9 - No Longer Used | MURATA ERIE NORTH AMERICA INC DIVOF | 12294 | ![]() |
JN14-1968A | 5 - Replaced / Discontinued | 9 - No Longer Used | SPRAGUE ELECTRIC CO | 56289 | ![]() |
JN14-1968B | C - Advisory Reference | 1 - Incomplete Part Number | SPRAGUE ELECTRIC CO | 56289 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
59 | 5915 | 008533962 | A047B0 | 00765 | X | 4 | 9 | A | P | U | 30 Nov 1966 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Partial Descriptive Item Identification (Type 1 Concept)
A Defense Logistics Information Service-generated code for items lacking but requiring an RPDMRC (i.e., through mass FIIG revision change an item may be downgraded from a type 1 to a reference or partial descriptive method item identification).
Non-MLI/ Non-SLI — Demilitarization not required.
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZZ | ||||||||||||||||||||||||||||||
N9BN | 1 | G | Z | KE | KE | 1 Jun 2006 |
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
The Government has unlimited rights to the technical data, and the data package is complete. Valid AMCs: 1 and 2.
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
Naval ICP, Philadelphia, PA 19111
Naval ICP, Philadelphia, PA 19111
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 3 | 9 | 1 | KE | D | B46N0088-1 | 12464 | ![]() | ||||
3 | 5 | 1 | 5 | TX | D | JN14-1968C | 56289 | ![]() | ||||
3 | 5 | 9 | 5 | ZG | B | 9622-001-9000 | 12294 | ![]() | ||||
1 | 5 | 9 | 5 | ZG | B | JN14-1968A | 56289 | ![]() | ||||
C | 1 | 5 | ZZ | AC | JN14-1968B | 56289 | ![]() |
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A specification, standard, or other reference number which is superseded, canceled, obsolete or discontinued and is coded Reference Number Category Code (RNCC) 5; a reference number for information only coded RNCC 6; or a reference number coded RNCC D.
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
Naval ICP, Philadelphia, PA 19111
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
Defense Supply Center Columbus, Columbus, OH 43218
Germany
Manufacturer and/or reference number are not authorized for procurement. NOTE: This code may be used for obsolete or informative reference numbers only.
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
USA
Navy
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
KE | 72D | Z | 9 | A | H | Z | P | 061990 | X | 58500 | ELECTRICAL-EQUIP-FILTERS |
Naval ICP, Philadelphia, PA 19111
Communications/Electronics, other than SIGINT/EW or COMSEC. Repair Parts and Components
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
No special handling required.
77.5
No Variation. NMFC and UFCC Match.
Defense Logistics Agency, Enterprise Business Systems
NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Unclassified
1
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
Department of the Navy
Defense Logistics Agency
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
ADAU | Body Height | 2.625 INCHES NOMINAL |
ADAQ | Body Length | 4.000 INCHES NOMINAL |
CQRG | Body Material | METAL |
ADAT | Body Width | 1.370 INCHES NOMINAL |
AEBY | Distance Between Centerlines Of Mounting Facilities Parallel To Body Length | 2.500 INCHES NOMINAL |
AEHA | Distance Between Centerlines Of Mounting Facilities Parallel To Body Width | 2.000 INCHES NOMINAL |
CQDW | Functional Terminal Type And Quantity | 27 TAB, SOLDER LUG OUTPUT 2ND FUNCTION |
CQDW | Functional Terminal Type And Quantity | 5 TAB, SOLDER LUG GROUND 3RD FUNCTION |
CQDW | Functional Terminal Type And Quantity | 1 CONNECTOR, RECEPTACLE INPUT 1ST FUNCTION |
AHCG | Maximum Temp Rise | 25.0 DEG CELSIUS |
AXHR | Mounting Facility Type And Quantity | 4 UNTHREADED HOLE |
AHBC | Operating Current Rating Per Function In Amps | 0.2 5TH RADIO INTERFERENCE |
AHBC | Operating Current Rating Per Function In Amps | 0.2 6TH RADIO INTERFERENCE |
AHBC | Operating Current Rating Per Function In Amps | 0.3 3RD RADIO INTERFERENCE |
AHBC | Operating Current Rating Per Function In Amps | 0.3 4TH RADIO INTERFERENCE |
AHBC | Operating Current Rating Per Function In Amps | 0.5 2ND RADIO INTERFERENCE |
AHBC | Operating Current Rating Per Function In Amps | 0.5 1ST RADIO INTERFERENCE |
AFGA | Operating Temp Range | -55.0/+125.0 DEG CELSIUS |
CQGC | Operating Voltage Rating And Type Per Function | 130.0 VOLTS AC 1ST RADIO INTERFERENCE 1ST FUNCTION |
CQGC | Operating Voltage Rating And Type Per Function | 130.0 VOLTS AC 2ND RADIO INTERFERENCE 2ND FUNCTION |
CQGC | Operating Voltage Rating And Type Per Function | 30.0 VOLTS DC 5TH RADIO INTERFERENCE 5TH FUNCTION |
CQGC | Operating Voltage Rating And Type Per Function | 30.0 VOLTS DC 6TH RADIO INTERFERENCE 6TH FUNCTION |
CQGC | Operating Voltage Rating And Type Per Function | 30.0 VOLTS AC 3RD RADIO INTERFERENCE 3RD FUNCTION |
CQGC | Operating Voltage Rating And Type Per Function | 30.0 VOLTS AC 4TH RADIO INTERFERENCE 4TH FUNCTION |
AKNA | Inclosure Type | HERMETICALLY SEALED |
AHBP | Input Terminal Identification | MS3114H-20-41P |
AHBN | Input Terminal Manufacturer Code | 96906 |
AHAS | Load Impedance Per Function | 50.0 OHMS 1ST RADIO INTERFERENCE |
AHAS | Load Impedance Per Function | 50.0 OHMS 2ND RADIO INTERFERENCE |
AHAS | Load Impedance Per Function | 50.0 OHMS 3RD RADIO INTERFERENCE |
AHAS | Load Impedance Per Function | 50.0 OHMS 6TH RADIO INTERFERENCE |
AHAS | Load Impedance Per Function | 50.0 OHMS 4TH RADIO INTERFERENCE |
AHAS | Load Impedance Per Function | 50.0 OHMS 5TH RADIO INTERFERENCE |
AHBB | Power Line Frequency Rating Per Function In Hertz | 400.0 1ST RADIO INTERFERENCE |
AHBB | Power Line Frequency Rating Per Function In Hertz | 400.0 3RD RADIO INTERFERENCE |
AHBB | Power Line Frequency Rating Per Function In Hertz | 400.0 4TH RADIO INTERFERENCE |
AHBB | Power Line Frequency Rating Per Function In Hertz | 400.0 2ND RADIO INTERFERENCE |
AHBL | Principal Circuitry Type Per Function | INDUCTANCE-CAPACITANCE 1ST RADIO INTERFERENCE |
AHBL | Principal Circuitry Type Per Function | INDUCTANCE-CAPACITANCE 3RD RADIO INTERFERENCE |
AHBL | Principal Circuitry Type Per Function | INDUCTANCE-CAPACITANCE 2ND RADIO INTERFERENCE |
AHBL | Principal Circuitry Type Per Function | INDUCTANCE-CAPACITANCE 5TH RADIO INTERFERENCE |
AHBL | Principal Circuitry Type Per Function | INDUCTANCE-CAPACITANCE 6TH RADIO INTERFERENCE |
AHBL | Principal Circuitry Type Per Function | INDUCTANCE-CAPACITANCE 4TH RADIO INTERFERENCE |
AHAQ | Source Impedance Rating Per Function | 50.0 OHMS 1ST RADIO INTERFERENCE |
AHAQ | Source Impedance Rating Per Function | 50.0 OHMS 2ND RADIO INTERFERENCE |
AHAQ | Source Impedance Rating Per Function | 50.0 OHMS 4TH RADIO INTERFERENCE |
AHAQ | Source Impedance Rating Per Function | 50.0 OHMS 5TH RADIO INTERFERENCE |
AHAQ | Source Impedance Rating Per Function | 50.0 OHMS 6TH RADIO INTERFERENCE |
AHAQ | Source Impedance Rating Per Function | 50.0 OHMS 3RD RADIO INTERFERENCE |
FEAT | Special Features | 27 FUNCTIONS; 2.500 IN. OVERALL WIDTH |
ABHP | Overall Length | 4.000 INCHES NOMINAL |
PKWT | Unpackaged Unit Weight | 1.400 POUNDS |
AEBV | Unthreaded Mounting Hole Diameter | 0.375 INCHES NOMINAL |
AECR | Vibration Resistance Range In Hertz | +10.0/+2000.0 |
STYL | Style Designator | RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES |
TEST | Test Data Document | 76301-B46N0088-1 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |