5915-00-995-4759
FILTER,BAND PASS
5915-00-995-4759 (5915009954759, 009954759)
Part Numbers (4 listings): 77C701590-1 | 77C701590P001 | 20-0195-00 | 77C701590P001REVC |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 77C701590-1 | 3 - Design Control Reference | 2 - Production Item | LOCKHEED MARTIN CORPORATION | 03538 |  |
| 77C701590P001 | 5 - Replaced / Discontinued | 2 - Production Item | HISONIC, INC. | 11402 |  |
| 20-0195-00 | 5 - Replaced / Discontinued | 2 - Production Item | HISONIC, INC. | 11402 | |
| 77C701590P001 | 7 - Vendor Item Drawing Reference | 2 - Production Item | LOCKHEED MARTIN CORPORATION | 03538 | |
| 77C701590P001REVC | C - Advisory Reference | 1 - Incomplete Part Number | LOCKHEED MARTIN CORPORATION | 03538 | |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
7 - Vendor Item Drawing Reference
Reference Number Category Code (DRN_2910)
Vendor Item Drawing Reference (formerly Specification Control Reference). The number assigned by a design activity to a drawing that is not item-identifying, but which delineates existing commercial or vendor-developed items meeting all engineering and test requirements specified, without imposing additional test/engineering requirements not normally provided by the vendor(s). Includes only those drawings which meet the definition for Vendor Item Drawing in MIL-STD 100. Vendor Item Drawing References are administrative control numbers and shall not be used as part identification numbers.
C - Advisory Reference
Reference Number Category Code (DRN_2910)
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
1 - Incomplete Part Number
Reference Number Variation Code (DRN_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 59 | 5915 | 009954759 | A047B0 | 00209 | X | 1 | D | P | U | 4 Apr 1967 |
A047B0
Federal Item Identification Guide (FIIG_4065)
00209
Item Naming Code (INC_4080)
4 Apr 1967
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
D
Demilitarization Code (DEMIL_CD_0167)
MLI (SME) — Total destruction of item and components so as to preclude restoration or repair to a usable condition by melting, cutting, tearing, scratching, crushing, breaking, punching, neutralizing, etc. (As an alternate, burial or deep water dumping may be used when coordinated with the DOD Demilitarization Program Office.)
P
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| YA01 | 1 Jan 2002 | |||||||||||||||||||||||||||||
| N9BN | N9ND | 1 | R | Z | HD | HD | 1 Jul 2005 | |||||||||||||||||||||||
1
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
R
Acquisition Method Suffix Code (AMSC_2876)
The data or the rights to use the data needed to purchase this part from additional sources are not owned by the Government and it has been determined that it is uneconomical to purchase them. Valid AMCs: 1, 2, 3, 4 and 5.
Z
Item Management Code (IMC_2744)
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
HD
Item Management Coding Activity (IMC_ACTY_2748)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
HD Collaborators
Supplementary Collaborators (SUPPLM_COLLBR_2533)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 3 | 2 | 1 | HH | D | 77C701590-1 | 03538 | | ||||
| 5 | 2 | 5 | TX | 20-0195-00 | 11402 | | ||||||
| 5 | 2 | 5 | TX | 77C701590P001 | 11402 | | ||||||
| 3 | 7 | 2 | 1 | HH | D | 77C701590P001 | 03538 | | ||||
| C | 1 | 6 | ZZ | AC | 77C701590P001REVC | 03538 | | |||||
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
1
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
HH
Reference Number Action Activity Code (RNAAC_2900)
Navy ICP, Mechanicsburg, PA 17055-0788
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
TX
Reference Number Action Activity Code (RNAAC_2900)
Defense Supply Center Columbus, Columbus, OH 43218
7
Reference Number Category Code (RNCC_2910)
Vendor Item Drawing Reference (formerly Specification Control Reference). The number assigned by a design activity to a drawing that is not item-identifying, but which delineates existing commercial or vendor-developed items meeting all engineering and test requirements specified, without imposing additional test/engineering requirements not normally provided by the vendor(s). Includes only those drawings which meet the definition for Vendor Item Drawing in MIL-STD 100. Vendor Item Drawing References are administrative control numbers and shall not be used as part identification numbers.
C
Reference Number Category Code (RNCC_2910)
Advisory Reference. A number assigned to an item of production or supply not included in the item-of-supply concept to which the NSN has been assigned (e.g., an item that may have been used in the preproduction equipment design which has since been redesigned or replaced). Use of this RNCC is restricted to conditions where cross-reference is required to establish identification to an item of supply. Additionally, there is not direct relationship of the reference number to the NSN other than a Service/Agency individual decision. (RNCC shall be used only in conjunction with RNVC 1.
1
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that does NOT identify an item of production without the use of additional information, or a specific part, type, or similar reference number does NOT identify or item of supply without the use of additional information.
6
Document Availability Code (DAC_2640)
The reference number is represented by technical documentation other than a drawing but the documentation was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
ZZ
Reference Number Action Activity Code (RNAAC_2900)
USA
AC
Service / Agency Designator Code (SADC_4672)
Navy
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 6 | TX | 0 | 4 May 1982 |
6
Item Standardization Code (ISC_2650)
An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
TX
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Columbus, Columbus, OH 43218
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
4 May 1982
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HH | 593 | Z | 9 | A | H | Z | P | 061990 | X | 58500 | ELECTRICAL-EQUIP-FILTERS |
HH
Originating Activity Code (ORIG_ACTY_CD_4210)
Navy ICP, Mechanicsburg, PA 17055-0788
593
Water Commodity Code (WRT_CMDTY_CD_9275)
Motors and Parts, (machinery and parts), (less than 35 feet)
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
H
Air Commodity Code (AIR_CMTY_HDLG_9215)
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
P
Less Than Truckload (CLAS_RTNG_CD_2770)
77.5
061990
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
X
NMFC Sub Item Number (SUB_ITM_NBR_0861)
58500
Uniform Freight Classification (UFC_CD_MODF_3040)
ELECTRICAL-EQUIP-FILTERS
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
SMS
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
Defense Logistics Agency, Enterprise Business Systems
J
Acquisition Advice Code (AAC_2507)
NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
7
Controlled Item Inventory Code (CIIC_2863)
Non-Sensitive (SRC-N/A) — UNCLASSIFIED AA&E or Items assigned a Demilitarization Code other than A, B, Q or P for which another CIIC is inappropriate. (NOTE: The loss, theft, unlawful 011disposition, and/or recovery of an item with CIIC 7 will be investigated in accordance with DoD 4000.25-2-M and DoD 7200.14–R, Volume 12, Chapter7).
1
Quantity Unit Pack (QUP_6106)
1
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
DS
Service / Agency Code (MOE_CD_2833)
Defense Logistics Agency
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | 41 | 1 | AAA | 20.3 lbs | 0.185 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | EA | JC | X | EC | DO | 00 | Q | Q | O |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
41
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Watervaporproof bag, sealed
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
AAA
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
20.3 lbs
Unit Pack Weight (UP_WT_5153)
0.185 cu ft
Unit Pack Cube (UP_CU_5155)
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
EA
Wrapping Material Code (WRAP_MAT_CD_5163)
MIL-DTL-17667, neutral wrapping paper
JC
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
ASTM-D4727, domestic fiberboard used as pads, cells, die cuts or sleeves
X
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
As required to protect the item or elements of the package
EC
Unit Container Code (UNIT_CTNR_CD_5166)
ASTM-D5118, Type CF, Class domestic, corrugated fiberboard box.
DO
Intermediate Container Code (INTMD_CTNR_CD_5167)
Any suitable fiber box included in this table may be used (see J.4.9.1).
00
Special Marking Code (SP_MKG_CD_5169)
No special marking
Q
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished in accordance with table C.II for the packing level specified. Closure sealing and reinforcement shall be in accordance with applicable specification for shipping container.
Q
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing shall be accomplished in accordance with table C-II for the packing level specified. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.
O
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
Options can be exercised as to specific method of preservation or DoD approved packaging materials to be used. However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| ADAU | Body Height | 5.250 INCHES MAXIMUM |
| ADAQ | Body Length | 6.500 INCHES MAXIMUM |
| CQRG | Body Material | METAL |
| ADAT | Body Width | 5.750 INCHES MAXIMUM |
| CRBC | Discrimination At Specified Frequencies Per Function In Decibels | 20.0 MINIMUM 1ST BAND PASS 1ST FUNCTION AND 3.0 MAXIMUM 1ST BAND PASS 1ST FUNCTION AND 3.0 MAXIMUM 1ST BAND PASS 1ST FUNCTION AND 20.0 MINIMUM 1ST BAND PASS 1ST FUNCTION |
| CRBC | Discrimination At Specified Frequencies Per Function In Decibels | 20.0 MINIMUM 2ND BAND PASS 2ND FUNCTION AND 3.0 MAXIMUM 2ND BAND PASS 2ND FUNCTION AND 3.0 MAXIMUM 2ND BAND PASS 2ND FUNCTION AND 20.0 MINIMUM 2ND BAND PASS 2ND FUNCTION |
| CRBC | Discrimination At Specified Frequencies Per Function In Decibels | 20.0 MINIMUM 4TH BAND PASS 4TH FUNCTION AND 3.0 MAXIMUM 4TH BAND PASS 4TH FUNCTION AND 3.0 MAXIMUM 4TH BAND PASS 4TH FUNCTION AND 20.0 MINIMUM 4TH BAND PASS 4TH FUNCTION |
| CRBC | Discrimination At Specified Frequencies Per Function In Decibels | 20.0 MINIMUM 5TH BAND PASS 5TH FUNCTION AND 3.0 MAXIMUM 5TH BAND PASS 5TH FUNCTION AND 3.0 MAXIMUM 5TH BAND PASS 5TH FUNCTION AND 20.0 MINIMUM 5TH BAND PASS 5TH FUNCTION |
| CRBC | Discrimination At Specified Frequencies Per Function In Decibels | 20.0 MINIMUM 6TH BAND PASS 6TH FUNCTION AND 3.0 MAXIMUM 6TH BAND PASS 6TH FUNCTION AND 3.0 MAXIMUM 6TH BAND PASS 6TH FUNCTION AND 20.0 MINIMUM 6TH BAND PASS 6TH FUNCTION |
| CRBC | Discrimination At Specified Frequencies Per Function In Decibels | 20.0 MINIMUM 3RD BAND PASS 3RD FUNCTION AND 3.0 MAXIMUM 3RD BAND PASS 3RD FUNCTION AND 3.0 MAXIMUM 3RD BAND PASS 3RD FUNCTION AND 20.0 MINIMUM 3RD BAND PASS 3RD FUNCTION |
| AEBY | Distance Between Centerlines Of Mounting Facilities Parallel To Body Length | 5.375 INCHES NOMINAL |
| AEHA | Distance Between Centerlines Of Mounting Facilities Parallel To Body Width | 4.625 INCHES NOMINAL |
| CRBB | Frequency Band Width Per Function | 250.00 HERTZ 1ST BAND PASS AND 270.00 HERTZ 1ST BAND PASS |
| CRBB | Frequency Band Width Per Function | 260.00 HERTZ 2ND BAND PASS AND 280.00 HERTZ 2ND BAND PASS |
| CRBB | Frequency Band Width Per Function | 270.00 HERTZ 3RD BAND PASS AND 290.00 HERTZ 3RD BAND PASS |
| CRBB | Frequency Band Width Per Function | 280.00 HERTZ 4TH BAND PASS AND 300.00 HERTZ 4TH BAND PASS |
| CRBB | Frequency Band Width Per Function | 290.00 HERTZ 5TH BAND PASS AND 310.00 HERTZ 5TH BAND PASS |
| CRBB | Frequency Band Width Per Function | 300.00 HERTZ 6TH BAND PASS AND 320.00 HERTZ 6TH BAND PASS |
| CQDW | Functional Terminal Type And Quantity | 2 TAB, SOLDER LUG GROUND 3RD FUNCTION |
| CQDW | Functional Terminal Type And Quantity | 7 TAB, SOLDER LUG INPUT 1ST FUNCTION |
| CQDW | Functional Terminal Type And Quantity | 8 TAB, SOLDER LUG OUTPUT 2ND FUNCTION |
| AXHR | Mounting Facility Type And Quantity | 4 THREADED STUD |
| AKEJ | Mounting Facility Screw Thread Series Designator | UNC |
| CQJX | Nominal Thread Size | 0.375 INCHES |
| AFGA | Operating Temp Range | +15.0/+55.0 DEG CELSIUS |
| AHAV | Output Impedance Per Function W/Source Across Input | 34.0 KILOHMS 5TH BAND PASS |
| AHAV | Output Impedance Per Function W/Source Across Input | 34.0 KILOHMS 6TH BAND PASS |
| AHAV | Output Impedance Per Function W/Source Across Input | 34.0 KILOHMS 1ST BAND PASS |
| AHAV | Output Impedance Per Function W/Source Across Input | 34.0 KILOHMS 2ND BAND PASS |
| AHAV | Output Impedance Per Function W/Source Across Input | 34.0 KILOHMS 3RD BAND PASS |
| AHAV | Output Impedance Per Function W/Source Across Input | 34.0 KILOHMS 4TH BAND PASS |
| AKNA | Inclosure Type | ENCASED |
| AHAU | Input Impedance Per Function W/Load | 600.0 OHMS 1ST BAND PASS |
| AHAU | Input Impedance Per Function W/Load | 600.0 OHMS 2ND BAND PASS |
| AHAU | Input Impedance Per Function W/Load | 600.0 OHMS 3RD BAND PASS |
| AHAU | Input Impedance Per Function W/Load | 600.0 OHMS 4TH BAND PASS |
| AHAU | Input Impedance Per Function W/Load | 600.0 OHMS 5TH BAND PASS |
| AHAU | Input Impedance Per Function W/Load | 600.0 OHMS 6TH BAND PASS |
| CQDR | Insertion Loss At Reference Frequency Per Function In Decibels | 22.5 1ST BAND PASS |
| CQDR | Insertion Loss At Reference Frequency Per Function In Decibels | 22.5 2ND BAND PASS |
| CQDR | Insertion Loss At Reference Frequency Per Function In Decibels | 22.5 3RD BAND PASS |
| CQDR | Insertion Loss At Reference Frequency Per Function In Decibels | 22.5 4TH BAND PASS |
| CQDR | Insertion Loss At Reference Frequency Per Function In Decibels | 22.5 5TH BAND PASS |
| CQDR | Insertion Loss At Reference Frequency Per Function In Decibels | 22.5 6TH BAND PASS |
| AHAJ | Reference Frequency Per Function | 310.0 SINGLE HIGH PASS GIGAHERTZ |
| AHAJ | Reference Frequency Per Function | 260.0 SINGLE HIGH PASS PULSES PER SECOND |
| AHAJ | Reference Frequency Per Function | 270.0 SINGLE HIGH PASS TWO PHASE TO TWO PHASE |
| AHAJ | Reference Frequency Per Function | 280.0 SINGLE HIGH PASS TWO PHASE TO THREE PHASE |
| AHAJ | Reference Frequency Per Function | 290.0 SINGLE HIGH PASS HERTZ |
| AHAJ | Reference Frequency Per Function | 300.0 SINGLE HIGH PASS THREE PHASE TO TWO PHASE |
| FEAT | Special Features | 15 FUNCTIONS |
| ABKW | Overall Height | 5.950 INCHES MAXIMUM |
| PKWT | Unpackaged Unit Weight | 20.000 POUNDS |
| CQFC | Specified Frequencies Of Discrimination Per Function | 230.00 HERTZ 1ST BAND PASS 1ST FUNCTION AND 250.00 HERTZ 1ST BAND PASS 1ST FUNCTION AND 270.00 HERTZ 1ST BAND PASS 1ST FUNCTION AND 290.00 HERTZ 1ST BAND PASS 1ST FUNCTION |
| CQFC | Specified Frequencies Of Discrimination Per Function | 240.00 HERTZ 2ND BAND PASS 2ND FUNCTION AND 260.00 HERTZ 2ND BAND PASS 2ND FUNCTION AND 280.00 HERTZ 2ND BAND PASS 2ND FUNCTION AND 300.00 HERTZ 2ND BAND PASS 2ND FUNCTION |
| CQFC | Specified Frequencies Of Discrimination Per Function | 250.00 HERTZ 3RD BAND PASS 3RD FUNCTION AND 270.00 HERTZ 3RD BAND PASS 3RD FUNCTION AND 290.00 HERTZ 3RD BAND PASS 3RD FUNCTION AND 310.00 HERTZ 3RD BAND PASS 3RD FUNCTION |
| CQFC | Specified Frequencies Of Discrimination Per Function | 260.00 HERTZ 4TH BAND PASS 4TH FUNCTION AND 280.00 HERTZ 4TH BAND PASS 4TH FUNCTION AND 300.00 HERTZ 4TH BAND PASS 4TH FUNCTION AND 320.00 HERTZ 4TH BAND PASS 4TH FUNCTION |
| CQFC | Specified Frequencies Of Discrimination Per Function | 270.00 HERTZ 5TH BAND PASS 5TH FUNCTION AND 290.00 HERTZ 5TH BAND PASS 5TH FUNCTION AND 310.00 HERTZ 5TH BAND PASS 5TH FUNCTION AND 330.00 HERTZ 5TH BAND PASS 5TH FUNCTION |
| CQFC | Specified Frequencies Of Discrimination Per Function | 280.00 HERTZ 6TH BAND PASS 6TH FUNCTION AND 300.00 HERTZ 6TH BAND PASS 6TH FUNCTION AND 320.00 HERTZ 6TH BAND PASS 6TH FUNCTION AND 340.00 HERTZ 6TH BAND PASS 6TH FUNCTION |
| STYL | Style Designator | RECTANGULAR TERMINAL/TERMINALS ON ONE SURFACE |
Back to TopBack to Top
