Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
---|---|---|---|---|---|
TLC14-3EF1 | 3 - Design Control Reference | 2 - Production Item | TELONIC BERKELEY, INC. | 04423 | ![]() |
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
59 | 5915 | 010101142 | A047B0 | 13911 | X | 1 | B | P | U | 22 Sep 1975 |
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
Full Descriptive Item Identification
MLI (Non-Significant Military Equipment – Non-SME) — Demilitarization not required — Trade Security Controls (TSCs) required at disposition.
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
Precious Metal Content is unknown.
MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ZZ | ||||||||||||||||||||||||||||||
A918 | 3 | L | Z | CD | BD | 1 Aug 2012 |
Acquire directly from the actual manufacturer, whether or not the prime contractor is the actual manufacturer.
The annual buy value of this part falls below the screening threshold of $10,000 but it has been screened for known source(s). (NOTE: This code shall not be used when screening parts entering the inventory. It shall not be assigned in preference to or supersede any other AMSC.) Valid AMCs: 1, 2, 3, 4 and 5.
Integrated Management: Relinquishment of Service management of an item in designated commodity oriented Federal Supply Classes to the IMM (FSC manager) for management.
U.S. Army War Reserve Command, New Cumberland, PA 17070-5008
U.S. Army Aviation and Missile Command, Redstone Arsenal, AL 35898-5230
RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | 3 | 2 | 3 | TX | D | TLC14-3EF1 | 04423 | ![]() |
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
The reference number is represented by technical documentation other than a drawing and the documentation was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the technical documentation upon request.
Defense Supply Center Columbus, Columbus, OH 43218
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
TX | 72D | Z | 9 | A | H | Z | P | 061400 | X | 34450 | CONDENSERS-PARTS-NOI-CAPACITORS |
Defense Supply Center Columbus, Columbus, OH 43218
Communications/Electronics, other than SIGINT/EW or COMSEC. Repair Parts and Components
No special type of cargo code applicable
No special handling required
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
No special handling required.
77.5
No Variation. NMFC and UFCC Match.
Defense Logistics Agency, Enterprise Business Systems
NOT STOCKED, CENTRALLY PROCURED # (NON-STOCKED ITEMS) IMM/Service centrally managed but not stocked item. Procurement will be initiated only after receipt of a requisition.
Unclassified
1
ARMY: Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. Refer to appropriate manuals or directives for specific instructions. MARINE CORPS: Item requires special handling/or condemnation procedures because of specific reasons (i.e., precious metal content, high dollar value, critical material, or hazardous material). Refer to appropriate manuals/directives for specific instructions. NAVY: Field Activity Control Items
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
Department of the Army
Defense Logistics Agency
MRC | Decoded Requirement | Clear Text Reply |
---|---|---|
AHCH | Average Power Rating Per Function | 12.5 WATTS BLANK |
CQRG | Body Material | METAL |
ADAR | Body Outside Diameter | 1.250 INCHES NOMINAL |
CRBC | Discrimination At Specified Frequencies Per Function In Decibels | 3.0 MAXIMUM BLANK AND 3.0 MAXIMUM BLANK AND 50.0 MINIMUM BLANK AND 65.0 MINIMUM BLANK |
CRBB | Frequency Band Width Per Function | 5.60 MEGAHERTZ BLANK AND 14.00 MEGAHERTZ BLANK |
CQDW | Functional Terminal Type And Quantity | 1 CONNECTOR, RECEPTACLE INPUT 1ST FUNCTION |
CQDW | Functional Terminal Type And Quantity | 1 CONNECTOR, RECEPTACLE OUTPUT 2ND FUNCTION |
AXHR | Mounting Facility Type And Quantity | 1 CLAMP |
AFGA | Operating Temp Range | -54.0/+125.0 DEG CELSIUS |
AHAV | Output Impedance Per Function W/Source Across Input | 50.0 OHMS BLANK |
AHBT | Output Terminal Identification | 31709 |
AHBS | Output Terminal Manufacturer Code | 04423 |
AKNA | Inclosure Type | ENCASED |
AHAU | Input Impedance Per Function W/Load | 50.0 OHMS BLANK |
AHBP | Input Terminal Identification | 31708 |
AHBN | Input Terminal Manufacturer Code | 04423 |
CQDR | Insertion Loss At Reference Frequency Per Function In Decibels | 3.0 BLANK |
AHBL | Principal Circuitry Type Per Function | ELECTROMECHANICAL BLANK |
AHAJ | Reference Frequency Per Function | 9.8 MEGAHERTZ BLANK |
ABHP | Overall Length | 10.000 INCHES NOMINAL |
CRBN | Voltage Standing Wave Ratio Frequency Limits Per Function | 5.6 MEGAHERTZ BLANK AND 14.0 MEGAHERTZ BLANK |
AHBZ | Voltage Standing Wave Ratio Per Function | 1.5 BLANK |
CQFC | Specified Frequencies Of Discrimination Per Function | 5.60 MEGAHERTZ BLANK AND 14.00 MEGAHERTZ BLANK AND 28.00 MEGAHERTZ BLANK AND 35.00 MEGAHERTZ BLANK |
STYL | Style Designator | ROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES |