5915-01-268-3257
FILTER,RADIO FREQUENCY INTERFERENCE
5915-01-268-3257 (5915012683257, 012683257)
Part Numbers (4 listings): 10B747 | RFI14460 | F-13849 | 5860483 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 10B747 | 3 - Design Control Reference | 2 - Production Item | SORA POWER INC. | 13058 |  |
| RFI 14460 | 5 - Replaced / Discontinued | 2 - Production Item | EMS DEVELOPMENT CORPORATION | 13619 |  |
| F-13849 | 5 - Replaced / Discontinued | 2 - Production Item | LCR ELECTRONICS, INC. | 0AM43 | |
| 5860483 | 7 - Vendor Item Drawing Reference | 2 - Production Item | NAVAL SEA SYSTEMS COMMAND | 53711 |  |
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
7 - Vendor Item Drawing Reference
Reference Number Category Code (DRN_2910)
Vendor Item Drawing Reference (formerly Specification Control Reference). The number assigned by a design activity to a drawing that is not item-identifying, but which delineates existing commercial or vendor-developed items meeting all engineering and test requirements specified, without imposing additional test/engineering requirements not normally provided by the vendor(s). Includes only those drawings which meet the definition for Vendor Item Drawing in MIL-STD 100. Vendor Item Drawing References are administrative control numbers and shall not be used as part identification numbers.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 59 | 5915 | 012683257 | A047B0 | 00765 | X | 4 | 4 | D | P | A | 0 | 27 Nov 1987 |
A047B0
Federal Item Identification Guide (FIIG_4065)
00765
Item Naming Code (INC_4080)
27 Nov 1987
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
X
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
4
Type of Item Identification (TYP_II_4820)
Partial Descriptive Item Identification (Type 1 Concept)
4
Reference / Partial Descriptive Method Reason Code (RPDMRC_4765)
An approved item name and FIIG may exist but technical data sufficient for preparation of a full descriptive method item identification could not be acquired after several follow-up actions during a 150-day suspense period. Includes such reasons as: Industry refuses to provide the technical data based on policy, restricted or proprietary rights, non-existence of technical data, etc. (This code cannot be used in submittals for National Item Identification Number (NIIN) assignment or reinstatement.)
D
Demilitarization Code (DEMIL_CD_0167)
MLI (SME) — Total destruction of item and components so as to preclude restoration or repair to a usable condition by melting, cutting, tearing, scratching, crushing, breaking, punching, neutralizing, etc. (As an alternate, burial or deep water dumping may be used when coordinated with the DOD Demilitarization Program Office.)
P
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no information in the HMIRS; however, the NSN is in a FSC in Table II of Federal Standard 313 and a MSDS may be required by the user. The requirement for a MSDS is dependent on a hazard determination of the supplier or the intended end use of the product.
A
Precious Metals Indicator Code (PMIC_0802)
Item does not contain Precious Metal.
0
ADPE Identification Code (ADPEC_0801)
Represents items with no ADP components. NOTE: Codes 1 through 6 are only to be used when the item is Automatic Data Processing Equipment (ADPE) in its entirety and is limited to the type meeting only one of the definitions for codes 1 through 6. (See code 9)
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| N2H4 | 2 | B | P | E | HD | CN | GG | 1 Apr 1991 | ||||||||||||||||||||||
| YB01 | 1 Jun 2003 | |||||||||||||||||||||||||||||
| ZT01 | 1 Oct 2004 | |||||||||||||||||||||||||||||
| ZH01 | 1 Nov 2009 | |||||||||||||||||||||||||||||
| ZA01 | 1 Jun 2015 | |||||||||||||||||||||||||||||
2
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition for the first. time. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
B
Acquisition Method Suffix Code (AMSC_2876)
Acquisition of this part is restricted to source(s) specified on "Source Control", "Altered Item" or "Selected Item" drawings/documents. Valid AMCs: 1, 2, 3, 4 and 5.
P
Nonconsumable Item Material Support Code (NIMSC_0076)
Total depot maintenance is being accomplished by commercial contract.
E
Item Management Code (IMC_2744)
Reparables: Centrally managed recoverable items designated as reparable for the reasons that repair of unserviceable quantities of the items are considered by the inventory manager in satisfying requirements prior to or in conjunction with determining procurement quantities.
HD
Item Management Coding Activity (IMC_ACTY_2748)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
CN DSOR
Depot Source of Repair Codes (DSOR_0903)
Contract, Contiguous United States (CONUS)
GG
Supplementary Receivers (SUPPLM_RCVR_2534)
Naval Inventory Control Point, Philadelphia, PA 19111û5098
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3 | 2 | 5 | HD | 10B747 | 13058 | | ||||||
| 5 | 2 | 5 | HD | RFI 14460 | 13619 | | ||||||
| 5 | 2 | 5 | HD | F-13849 | 0AM43 | | ||||||
| 7 | 2 | 1 | HD | 5860483 | 53711 | | ||||||
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
HD
Reference Number Action Activity Code (RNAAC_2900)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
7
Reference Number Category Code (RNCC_2910)
Vendor Item Drawing Reference (formerly Specification Control Reference). The number assigned by a design activity to a drawing that is not item-identifying, but which delineates existing commercial or vendor-developed items meeting all engineering and test requirements specified, without imposing additional test/engineering requirements not normally provided by the vendor(s). Includes only those drawings which meet the definition for Vendor Item Drawing in MIL-STD 100. Vendor Item Drawing References are administrative control numbers and shall not be used as part identification numbers.
1
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 6 | TX | 0 | 23 Aug 1989 |
6
Item Standardization Code (ISC_2650)
An item authorized for procurement that is in a specific Federal Supply Class (FSC) or item name grouping consisting primarily of items which are one-of-a-kind; therefore, little or no potential exists for elimination of items through formal item reduction studies.
TX
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Columbus, Columbus, OH 43218
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction. Otherwise, use the National Stock Number (NSN) in your supply system.
23 Aug 1989
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HD | M | 658 | Z | 9 | A | H | Z | W | 061700 | Z | 34580 | ELEC-APPLIANCES-INSTRUMENTS-NOI |
HD
Originating Activity Code (ORIG_ACTY_CD_4210)
Naval Inventory Control Point, Mechanicsburg, PA 17055-0788
M
Less Than Carload (LCL_CD_2760)
85
658
Water Commodity Code (WRT_CMDTY_CD_9275)
Electical Appliances, Small
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
H
Air Commodity Code (AIR_CMTY_HDLG_9215)
Signal Corps supplies and equipment, including radio equipment and supplies, communications equipment and supplies, electrical equipment and supplies, etc.
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
W
Less Than Truckload (CLAS_RTNG_CD_2770)
Variable Rating
061700
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
Z
NMFC Sub Item Number (SUB_ITM_NBR_0861)
34580
Uniform Freight Classification (UFC_CD_MODF_3040)
ELEC-APPLIANCES-INSTRUMENTS-NOI
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
NRP
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
NAVICP-ERP, 700 Robbins Avenue, Philadelphia, PA 19111-5098
C
Acquisition Advice Code (AAC_2507)
SERVICE/AGENCY-MANAGED (Service/Agency use only.) Issue, transfer, or shipment is not subject to specialized controls other than those imposed by individual Services supply policy. 1. The item is centrally managed, stocked, and issued. 2. Requisitions will be submitted in accordance with Service requisitioning procedures.
7
Controlled Item Inventory Code (CIIC_2863)
Non-Sensitive (SRC-N/A) — UNCLASSIFIED AA&E or Items assigned a Demilitarization Code other than A, B, Q or P for which another CIIC is inappropriate. (NOTE: The loss, theft, unlawful 011disposition, and/or recovery of an item with CIIC 7 will be investigated in accordance with DoD 4000.25-2-M and DoD 7200.14–R, Volume 12, Chapter7).
0
Quantity Unit Pack (QUP_6106)
No QUP
H
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
ARMY: If condemned or uneconomically repairable, then dispose at intermediate level; COAST GUARD: Reparable item. Repair, condemnation, and disposal not authorized below intermediate (district) level; MARINE CORPS: Reparable item. When uneconomically reparable, condemn and dispose at fourth echelon level; NAVY: Depot Level Reparable
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DN
Service / Agency Code (MOE_CD_2833)
Department of the Navy
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A | P | A | 41 | 1 | 000 | 23.0 lbs | 14in x 8in x 6.5in | 0.421 cu ft |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 00 | FA | JC | 0 | ED | 00 | B | 24 | E | F | F | M |
A
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Packaging Data Record contains data that does not meet current MIL-STD-2073-1C/D formats
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
A
Item Type Storage Code (ITM_TYP_STOR_5156)
Heated General Purpose – Heated 40 F and above
41
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Watervaporproof bag, sealed
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
000
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
23.0 lbs
Unit Pack Weight (UP_WT_5153)
14in x 8in x 6.5in
Unit Pack Size (UP_SZ_5154)
0.421 cu ft
Unit Pack Cube (UP_CU_5155)
00
Preservation Material Code (PRSRV_MAT_CD_5162)
No requirement
FA
Wrapping Material Code (WRAP_MAT_CD_5163)
MIL-P-130, laminated and creped wrapping paper
JC
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
ASTM-D4727, domestic fiberboard used as pads, cells, die cuts or sleeves
0
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
Not Applicable
ED
Unit Container Code (UNIT_CTNR_CD_5166)
ASTM-D5118, Type CF, Class weather resistant, corrugated fiberboard box.
00
Intermediate Container Code (INTMD_CTNR_CD_5167)
No requirement.
B
Unit Container Level Code (UNIT_CTNR_LVL_5168)
Unit container provides level B packing protection.
24
Special Marking Code (SP_MKG_CD_5169)
Open for inspection or use only
E
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing shall be accomplished to meet the performance test requirements of ASTMD4169, Distribution Cycle 18, Assurance Level 1.
F
Packing Requirement Code - For Level B (Intermediate) Packing (LVL_B_PKG_CD_5171)
Packing is not required: the unit container shall also serve as the shipping container. Closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
F
Packing Requirement Code - For Minimal Packing (MINM_PK_RQ_CD_5172)
Packing is not required; the unit container shall also serve as the shipping container. Closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
M
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| CQGC | Operating Voltage Rating And Type Per Function | 115.0 VOLTS AC 1ST RADIO INTERFERENCE 1ST FUNCTION |
| CQGC | Operating Voltage Rating And Type Per Function | 115.0 VOLTS AC 2ND RADIO INTERFERENCE 2ND FUNCTION |
| CQGC | Operating Voltage Rating And Type Per Function | 115.0 VOLTS AC 3RD RADIO INTERFERENCE 3RD FUNCTION |
| AKNA | Inclosure Type | ENCASED |
| CQDW | Functional Terminal Type And Quantity | 3 SCREW OUTPUT 1ST FUNCTION |
| CQDW | Functional Terminal Type And Quantity | 1 SCREW GROUND 2ND FUNCTION |
| CQDW | Functional Terminal Type And Quantity | 1 CONNECTOR, PLUG INPUT 3RD FUNCTION |
| STYL | Style Designator | RECTANGULAR TERMINAL/TERMINALS ON ADJACENT SURFACES |
| ABHP | Overall Length | 14.000 INCHES NOMINAL |
| ABKW | Overall Height | 7.438 INCHES NOMINAL |
| ADAQ | Body Length | 12.500 INCHES NOMINAL |
| ADAT | Body Width | 6.500 INCHES NOMINAL |
| AXHR | Mounting Facility Type And Quantity | 12 UNTHREADED HOLE |
| AEBV | Unthreaded Mounting Hole Diameter | 0.312 INCHES NOMINAL |
| AEBY | Distance Between Centerlines Of Mounting Facilities Parallel To Body Length | 13.360 INCHES NOMINAL |
| AEHA | Distance Between Centerlines Of Mounting Facilities Parallel To Body Width | 7.360 INCHES NOMINAL |
Back to TopBack to Top
